Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
SNL Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Other Generations > 4th Generation Camaros

4th Generation Camaros 1993-2002

Reply
 
Thread Tools
Old 10-22-2008, 01:52 PM   #1
bret03
 
bret03's Avatar
 
Drives: 30th anniversary Z28, Jeep XJ
Join Date: Jul 2008
Location: MN
Posts: 282
HELP... 97 Z won't start.

My 97 Z28 with a 6 speed wont start. All the electronics come on and seem normal but the car wont start. No clicking, no nothing. The car has had this problem for a couple years on and off but by the time I can get someone to look at it the car is always working again. I believe the problem is with the wiring/sensor that read the electronic chip in the key. I tried the other set of keys, so the key isn't the problem. I've heard the security light should come on if thats the problem but it doesn't. My other thought is that it could be a problem with the sensor that makes sure the clutch is pushed in.

Any help would be greatly appreciated!
__________________
bret03 is offline   Reply With Quote
Old 10-22-2008, 02:06 PM   #2
GamerGuyZ28
5TH GEN BURNOUTS!
 
GamerGuyZ28's Avatar
 
Drives: 95 Z28, and a 2000 Z28
Join Date: Oct 2008
Location: Toccoa, GA
Posts: 130
I had the same problem in my '95 Z28, and it turned out to be a bad ignition switch, but be careful when checking/changing it because it got some blade-like edges on it and it will tear you fingers up bad.
__________________
Life begins at 100 MPH

GamerGuyZ28 is offline   Reply With Quote
Old 10-22-2008, 04:54 PM   #3
Robert91RS

 
Robert91RS's Avatar
 
Drives: Everywhere
Join Date: Jun 2008
Location: TX
Posts: 852
Ok, first things first.

1-get the battery tested, this is free and you never want to dump money on expensive or exotic parts when the easy stuff is a possability.

2-next test the clutch pedal position switch. it is right behind the pedal and if you unplug it and bridge the terminals in the pigtail with a paper clip you can fool it into thinking the pedal is depressed(just make sure your in nuetral before turning the key)

3-still no luck, how does chip in your key look? are the contacts ground flat with the black plastic? the "chip" is just a resistor and with no contact to the terminals in the lock cylinder the car doesn't know the key is there. a new key should run you $25 at your local dealer(try your spare key too, it may be in better condition)

4-without a volt meter the next step is either to remove your starter and have it tested or take a shot in the dark and try changing the ignition switch at the base of the column

I can tell you how to bypass the security chip if you want to know but you will need a volt meter and a soldering iron.

I hope this helps
Robert91RS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Push Start button? CG'sSS Camaro DIY & HOW-TO instructions & discussions 158 06-06-2012 07:27 PM
No Push Start?!?! Why Not cabaret2 5th Gen Camaro SS LS LT General Discussions 82 02-01-2012 03:21 PM
Link to Video of interior with start up???? Cmyskill Camaro Photos | Spyshots | Video | Media Gallery 6 10-23-2008 05:37 AM
What a Great Day - Camaro orders start, DOW up 936, GM up 33% heinzd01 5th Gen Camaro SS LS LT General Discussions 17 10-14-2008 09:12 AM
Dealers Will Start Taking Orders In Oct. ckellyme3 Camaro Price | Ordering | Tracking | Dealers Discussions 1 09-04-2008 08:03 PM


All times are GMT -5. The time now is 11:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.