2010 and 3/4 year Camaro? :) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jcchevy · 06-08-2010, 02:29 PM

Hi guys, I am a newby to this forum. Y? cause i pick up my 2010 Camaro SS RS (IBM) this Saturday

I have been a chevy fan forever and was mainly a truck only fan, well that changed when this freak of a car (called the camaro) came out. You can check out my truck at www.jcchevy.com.

Regarding 2011's/2010's
I see 2011's are getting ordered now and ready for production. The build date on my car is 3/8/2010 so its actually "almost" a year newer then the 1st 2010 cars ever built so I can say its a 2010 pre-2011

don't ya think?

one thing I found interesting is that it does not have the small square GM symbol right behind the front wheel like other 2010's have. I heard they are not putting those on the 2011's so the hard core camaro folks can tell the difference.

What do you guys think? BTW this forum is super. I will post pics after i get the car.

I had fun modifying my truck, can't wait to start on the C5

SSOOCH · 06-08-2010, 02:32 PM

There are some 2010's that don't have the GM badge of excellence or "chicklet". They stopped around the 40k mark of VINS. Also the newer SS models will not have the "GM Performance Division" badge under the hood because that division was dissolved with the re-org. But I'd say your's is a 2011. Not a pre-2011.

jcchevy · 06-08-2010, 03:11 PM

Good to know and thanks for the info. Nice license plate

06-08-2010, 02:29 PM	#1
jcchevy jcchevy.com Drives: 04 Silverado, 10 Camaro 2SS RS Join Date: Jun 2010 Location: WI Posts: 41 View My Garage	2010 and 3/4 year Camaro? :) Hi guys, I am a newby to this forum. Y? cause i pick up my 2010 Camaro SS RS (IBM) this Saturday I have been a chevy fan forever and was mainly a truck only fan, well that changed when this freak of a car (called the camaro) came out. You can check out my truck at www.jcchevy.com. Regarding 2011's/2010's I see 2011's are getting ordered now and ready for production. The build date on my car is 3/8/2010 so its actually "almost" a year newer then the 1st 2010 cars ever built so I can say its a 2010 pre-2011 don't ya think? one thing I found interesting is that it does not have the small square GM symbol right behind the front wheel like other 2010's have. I heard they are not putting those on the 2011's so the hard core camaro folks can tell the difference. What do you guys think? BTW this forum is super. I will post pics after i get the car. I had fun modifying my truck, can't wait to start on the C5

06-08-2010, 02:32 PM	#2
SSOOCH "El Dictator" Drives: 08 HHR SS, 2010 Camaro SS/RS #16429 Join Date: Sep 2006 Location: South Jordan, UT Posts: 7,366 View My Garage	There are some 2010's that don't have the GM badge of excellence or "chicklet". They stopped around the 40k mark of VINS. Also the newer SS models will not have the "GM Performance Division" badge under the hood because that division was dissolved with the re-org. But I'd say your's is a 2011. Not a pre-2011. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headers for an L99 Automatic.....17/8 or 1 3/4 ?	Jekyll-N-Hyde	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	34	08-02-2010 01:54 PM
The truth about Shorty Headers	JoshJ81	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	33	02-20-2010 01:44 AM
LMPerformance, Stainless Works 2010 Camaro V6 304 headers	LMPerformance	V6 Bolt-Ons & Tunes	0	12-14-2009 01:50 PM
What size headers should I get...? 1 3/4, 1 7/8 or 2"	Carlos Garza	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	10-12-2009 09:24 PM
JBA releases exhausts, headers and midpipes.	Bewenched	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	09-16-2009 03:04 PM

06-08-2010, 03:11 PM	#3
jcchevy jcchevy.com Drives: 04 Silverado, 10 Camaro 2SS RS Join Date: Jun 2010 Location: WI Posts: 41 View My Garage	Good to know and thanks for the info. Nice license plate