Speedster's SST Camaro Build Thread [COTW 9/13/10] - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

speedster · 07-17-2010, 11:32 PM

Some more drivetrain goodies.

First pic - since this is a one-off drivetrain, items had to be made from scratch. The NRE guys fabbed up an awesome chromoly crossmember. This crossmember has an integrated driveshaft safety loop (not yet welded on until the driveshaft/rearend is finalized). Note how they made the crossmember follow the base contour of the transmission pan. These are car guys doing what they love. Incredible attention to detail.

Second pic - The undercarriage. The LSX motor, billet converter, 4L85E tranny and exhaust system. The downtubes from the turbos connect right in just like a factory system. The exhaust is a very straighforward 3" stainless with virtually no resistance. Also if you look very carefully the new stainless steel fuel lines have NOT been run yet-sorry the old ones are still there. We will post a pic when that has been completed.

LC · 07-17-2010, 11:40 PM

I have a question, I kinda feel why you did but I will still ask it..

If you were going for such project why not a WHITE body?

speedster · 07-17-2010, 11:44 PM

Last set of pics for tonight.

Since the SST needs to first and foremost be a street car, certain "items" need to be kept hidden when not in use. One of these is the parachute. When running at speeds greater than 150 mph in the 1/4 mile or 180 mph at the Maxton Mile a parachute is required. So we had to come up with a good way to mount one where no one would know most of the time. We found a location where it could be tied in to the frame and structural integrity of the rollcage, so that was done. Originally I had asked if we could just use a Class 3 receiver hitch but that was frowned on, so the fabrication guys went to work and made reinforcement plates and a tubular chromoly receiver for the chute mount.

The coolest part about this is that you can drive the car to the track, pop off the license plate, stick the chute pack on the back, make your runs, yank the chute pack back off, put the plate back on and drive home. Pretty neat...

First Pic - What the chute mount looks like with the license plate removed. This mount is rock solid in linear pull, as well as vertical and horizontal sheer strength.

Second Pic - This give you an idea of how beefy the mounting is. It is integrated directly in to the SST's structure.

Third Pic - the mount minus the actual chute pack. Looks like the SST has a tail...

speedster · 07-17-2010, 11:51 PM

Quote:

Originally Posted by LC

I have a question, I kinda feel why you did but I will still ask it..

If you were going for such project why not a WHITE body?

Two reasons - it "kind of evolved" but more than that, the BIW was not available yet and could not be pre-ordered. The SST was ordered first thing in October 2008.

Very valid questions though.

But it will work out in the long run since I am giving the original L99/6L80E combination to a very deserving individual, so that is a neat thing too... makes it worth it.

LC · 07-18-2010, 12:59 AM

Quote:

Originally Posted by speedster

Two reasons - it "kind of evolved" but more than that, the BIW was not available yet and could not be pre-ordered. The SST was ordered first thing in October 2008.

Very valid questions though.

But it will work out in the long run since I am giving the original L99/6L80E combination to a very deserving individual, so that is a neat thing too... makes it worth it.

fair enough

thespymaster · 07-18-2010, 07:57 AM

I can't wait to see / watch this beast hit the track.........

Great work!

navyflyer72 · 07-18-2010, 08:00 AM

I just want to get first dibs on any custom parts that you decide not to use because you are "taking that area to the next level" since you have pretty much done that with EVERY aspect of this build!

Seriously though, loving this build as much as I loved watching a Charlie Lillard built The Mule. Can't wait to maybe one day see this beast in person! Great work, you're keeping us entertained, intrigued and enlightened. (We should pitch this build to the Discovery Channel for a show!)

Mr Twisty · 07-18-2010, 09:25 AM

BIW can't be titled either, so it would have been a coin flip every time he hit the street.

speedster · 07-18-2010, 02:40 PM

Quote:

Originally Posted by thespymaster

I can't wait to see / watch this beast hit the track.........

Great work!

Thanks K. It will be great to hang out and cruise with you Jax members...

Quote:

Originally Posted by navyflyer72

I just want to get first dibs on any custom parts that you decide not to use because you are "taking that area to the next level" since you have pretty much done that with EVERY aspect of this build!

Well Thank You and there are parts that are already making the rounds in the C5 community.

Seriously though, loving this build as much as I loved watching a Charlie Lillard built The Mule. Can't wait to maybe one day see this beast in person! Great work, you're keeping us entertained, intrigued and enlightened. (We should pitch this build to the Discovery Channel for a show!)

Well, I'm glad it is entertaining. Funny you mention Charlie. At the HRPT (Hot Rod Power Tour) which is where the first pic in this thread of the concept was taken, I saw the Mule and spoke with Charlie about it. He was really nice. That car is still the benchmark for modern PT cars.

Quote:

Originally Posted by MisterCamaro69

BIW can't be titled either, so it would have been a coin flip every time he hit the street.

Ah, very valid point. Forgot about not able to be titled. That wouldn't work. Something about a Black 2010 Camaro being registered as a 1987 Chevy Blazer probably would not fly...

Mr Twisty · 07-18-2010, 10:06 PM

Quote:

Originally Posted by Speedster

Ah, very valid point. Forgot about not able to be titled. That wouldn't work. Something about a Black 2010 Camaro being registered as a 1987 Chevy Blazer probably would not fly...

Used to be able to get away with that stuff, I once had a 69 Camaro with engine from a 64 Impala, got rebuilders title that said "1964 Camaro"

speedster · 07-19-2010, 09:40 PM

Sorry - a little off topic, but this shot was taken at the shop yesterday. The first 6 seater that goes over 200 mph. I get pumped over the little things... If you have speed in your blood it has a tendency to spill over into everything.

And no, it is not mine, it is a client's.

*Mr. Wyndham* · 07-19-2010, 09:42 PM

Quote:

Originally Posted by speedster

Sorry - a little off topic, but this shot was taken at the shop yesterday. The first 6 seater that goes over 200 mph. I get pumped over the little things... If you have speed in your blood it has a tendency to spill over into everything.

You are so desensitized....

That's AWESOME!

speedster · 07-19-2010, 09:49 PM

Quote:

Originally Posted by Dragoneye

You are so desensitized....

That's AWESOME!

Hey wait - WHO is the one building a 25' boat from scratch ? Hmmm. I think it was one of the mods on this site whose screen name starts with D.... er something like that. You may know of him...

Mr Twisty · 07-19-2010, 09:57 PM

Quote:

Originally Posted by speedster

Sorry - a little off topic, but this shot was taken at the shop yesterday. The first 6 seater that goes over 200 mph. I get pumped over the little things... If you have speed in your blood it has a tendency to spill over into everything.

And no, it is not mine, it is a client's.

eet's purdy! Must be a lot of motor(s) to push that wing 200mph over the water!

*TAG UR IT* · 07-20-2010, 02:01 AM

Quote:

Originally Posted by speedster

Sorry - a little off topic, but this shot was taken at the shop yesterday. The first 6 seater that goes over 200 mph. I get pumped over the little things... If you have speed in your blood it has a tendency to spill over into everything.

And no, it is not mine, it is a client's.

*Mindz* · 07-20-2010, 02:18 AM

I'll go for a ride anytime in that boat.

Speedster, please tell you'll drive/ship this thing to C5FII if it's Central or West. I want to experience warp speed!

speedster · 07-20-2010, 08:28 AM

Quote:

Originally Posted by MisterCamaro69

eet's purdy! Must be a lot of motor(s) to push that wing 200mph over the water!

Quote:

Originally Posted by TAG UR IT

Quote:

Originally Posted by Mindz

I'll go for a ride anytime in that boat.

Speedster, please tell you'll drive/ship this thing to C5FII if it's Central or West. I want to experience warp speed!

Here's a video posted a while back setting the standing mile speed record. Horsepower in many forms is fun...

Mr Twisty · 07-20-2010, 08:54 AM

1:15 up sounds so cool! That would make a great cell ringtone

Darth_Emma · 07-20-2010, 09:10 AM

Quote:

Originally Posted by speedster

Here's a video posted a while back setting the standing mile speed record. Horsepower is many forms is fun...

Holy crap, Batman!

Wow wow wow!

*GTAHVIT* · 07-20-2010, 10:13 AM

So Bruce called me a few weeks ago saying, "Hey Chris we're thinking about bring the boat up the Saint John's River, maybe you and the wife and kids would like to come out with us for some fun. Skiing, tubes, you know, fun with the kiddos....."

Uhm... NoKthnxbye

Mr Twisty · 07-20-2010, 10:24 AM

Quote:

Originally Posted by GTAHVIT

So Bruce called me a few weeks ago saying, "Hey Chris we're thinking about bring the boat up the Saint John's River, maybe you and the wife and kids would like to come out with us for some fun. Skiing, tubes, you know, fun with the kiddos....."

Uhm... NoKthnxbye

*GTAHVIT* · 07-20-2010, 10:26 AM

True story...

Doc · 07-20-2010, 10:29 AM

Quote:

Originally Posted by Mindz

I'll go for a ride anytime in that boat.

Speedster, please tell you'll drive/ship this thing to C5FII if it's Central or West. I want to experience warp speed!

Yeah you and the other 4 screaming passengers lol.

Mr Twisty · 07-20-2010, 10:39 AM

Quote:

Originally Posted by GTAHVIT

True story...

Is this close?...

GTA: Hey Bruce, can you slow down?

Bruce: WHAT?

GTA: I SAID... CAN YOU SLOW DOWN PLEASE?

Bruce: WHAT?

GTA: YOU'RE SCARING THE KIDS (and me too) PLEASE SLOW DOWN!

Bruce: WHAT?

GTA: NEVERMIND!... (Our Father, who art in Heaven.....)

*GTAHVIT* · 07-20-2010, 10:56 AM

Quote:

Originally Posted by MisterCamaro69

Is this close?...

GTA: Hey Bruce, can you slow down?

Bruce: WHAT?

GTA: I SAID... CAN YOU SLOW DOWN PLEASE?

Bruce: WHAT?

GTA: YOU'RE SCARING THE KIDS (and me too) PLEASE SLOW DOWN!

Bruce: WHAT?

GTA: NEVERMIND!... (Our Father, who art in Heaven.....)

07-17-2010, 11:32 PM	#201
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 6,073 View My Garage	Some more drivetrain goodies. First pic - since this is a one-off drivetrain, items had to be made from scratch. The NRE guys fabbed up an awesome chromoly crossmember. This crossmember has an integrated driveshaft safety loop (not yet welded on until the driveshaft/rearend is finalized). Note how they made the crossmember follow the base contour of the transmission pan. These are car guys doing what they love. Incredible attention to detail. Second pic - The undercarriage. The LSX motor, billet converter, 4L85E tranny and exhaust system. The downtubes from the turbos connect right in just like a factory system. The exhaust is a very straighforward 3" stainless with virtually no resistance. Also if you look very carefully the new stainless steel fuel lines have NOT been run yet-sorry the old ones are still there. We will post a pic when that has been completed. Attached Images __________________ Last edited by speedster; 07-18-2010 at 12:04 AM.

07-17-2010, 11:40 PM	#202
LC MAUDERFAUKER Drives: SW 2SS x2 Join Date: Feb 2010 Location: MX Posts: 589	I have a question, I kinda feel why you did but I will still ask it.. If you were going for such project why not a WHITE body? __________________

07-17-2010, 11:44 PM	#203
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 6,073 View My Garage	Last set of pics for tonight. Since the SST needs to first and foremost be a street car, certain "items" need to be kept hidden when not in use. One of these is the parachute. When running at speeds greater than 150 mph in the 1/4 mile or 180 mph at the Maxton Mile a parachute is required. So we had to come up with a good way to mount one where no one would know most of the time. We found a location where it could be tied in to the frame and structural integrity of the rollcage, so that was done. Originally I had asked if we could just use a Class 3 receiver hitch but that was frowned on, so the fabrication guys went to work and made reinforcement plates and a tubular chromoly receiver for the chute mount. The coolest part about this is that you can drive the car to the track, pop off the license plate, stick the chute pack on the back, make your runs, yank the chute pack back off, put the plate back on and drive home. Pretty neat... First Pic - What the chute mount looks like with the license plate removed. This mount is rock solid in linear pull, as well as vertical and horizontal sheer strength. Second Pic - This give you an idea of how beefy the mounting is. It is integrated directly in to the SST's structure. Third Pic - the mount minus the actual chute pack. Looks like the SST has a tail... Attached Images __________________

07-18-2010, 07:57 AM	#206
thespymaster Drives: Rev-It-Up for Wounded Warriors Join Date: Nov 2009 Location: G4 CLASSIFIED Posts: 4,450 View My Garage	I can't wait to see / watch this beast hit the track......... Great work! __________________

07-18-2010, 08:00 AM	#207
navyflyer72 Drives: 2010 2SS/RS 6spd, BLK/CYB GRY Join Date: May 2009 Location: MD Posts: 400 View My Garage	I just want to get first dibs on any custom parts that you decide not to use because you are "taking that area to the next level" since you have pretty much done that with EVERY aspect of this build! Seriously though, loving this build as much as I loved watching a Charlie Lillard built The Mule. Can't wait to maybe one day see this beast in person! Great work, you're keeping us entertained, intrigued and enlightened. (We should pitch this build to the Discovery Channel for a show!) __________________ The Zac Hartwell & Ryan Dunn Tribute Camaro Project and Tour Benefiting the Wounded Warrior Project & Garth Brooks Teammates for Kids

07-18-2010, 09:25 AM	#208
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 13,290	BIW can't be titled either, so it would have been a coin flip every time he hit the street. __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin Great Racing Quotes "Never run out of real estate, traction and ideas at the same time." "I was doing fine until about mid-corner when I ran out of talent." "Don't brake until you see God, just don't meet him"

07-19-2010, 09:40 PM	#211
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 6,073 View My Garage	Sorry - a little off topic, but this shot was taken at the shop yesterday. The first 6 seater that goes over 200 mph. I get pumped over the little things... If you have speed in your blood it has a tendency to spill over into everything. And no, it is not mine, it is a client's. Attached Images __________________

07-20-2010, 02:18 AM	#216
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 16,503	I'll go for a ride anytime in that boat. Speedster, please tell you'll drive/ship this thing to C5FII if it's Central or West. I want to experience warp speed! __________________ "J, you're my favorite Pokemod" ~Revo1

07-20-2010, 08:54 AM	#218
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 13,290	1:15 up sounds so cool! That would make a great cell ringtone __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin Great Racing Quotes "Never run out of real estate, traction and ideas at the same time." "I was doing fine until about mid-corner when I ran out of talent." "Don't brake until you see God, just don't meet him"

07-20-2010, 10:13 AM	#220
GTAHVIT One Lucky Guy. Drives: #22 Tom Henry Racing 2010 2SS/RS Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,313 View My Garage	So Bruce called me a few weeks ago saying, "Hey Chris we're thinking about bring the boat up the Saint John's River, maybe you and the wife and kids would like to come out with us for some fun. Skiing, tubes, you know, fun with the kiddos....." Uhm... NoKthnxbye __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

07-20-2010, 10:26 AM	#222
GTAHVIT One Lucky Guy. Drives: #22 Tom Henry Racing 2010 2SS/RS Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,313 View My Garage	True story... __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	449	04-24-2013 07:52 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 04:38 PM