Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions

Camaro DIY & HOW-TO instructions & discussions All DIY projects & discussions

Reply
 
Thread Tools
Old 07-13-2010, 12:08 PM   #51
SummoneR
Paul
 
SummoneR's Avatar
 
Drives: '10 2SS/RS M6 "Marauder"
Join Date: Mar 2009
Location: NOR*CAL
Posts: 6,507
Send a message via Yahoo to SummoneR
Quote:
Originally Posted by 2SSRS View Post
It will take some time to finish this mod, Not all the parts are out from GM at this time, it takes some time for new parts to get out.

I will have some pics of the switch and harness this week and me cutting the dash for the switch.
WOW cut the dash already? I would wait to see if it works before I tried anything permanent.

Also as you're doing this could you look into what it would take(part number etc) to replace the dash cover too, for those who don't feel comfortable cutting their dash?

You are a true pioneer!!
__________________
SummoneR is offline   Reply With Quote
Old 07-13-2010, 12:10 PM   #52
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
No there is no one close, The dealer in my town has not got a New 2011 as of now, Don't let it get to you i say by the end of the month i will have all the parts.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-13-2010, 12:16 PM   #53
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Quote:
Originally Posted by SummoneR View Post
WOW cut the dash already? I would wait to see if it works before I tried anything permanent.

Also as you're doing this could you look into what it would take(part number etc) to replace the dash cover too, for those who don't feel comfortable cutting their dash?

You are a true pioneer!!
Will do, But you don't need too, My pics are not good but there is more then enable room behind the instrument Cluster, And the area behind the instrument was design with a cut out for the HUD.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-13-2010, 12:30 PM   #54
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
OK prices are out for all the parts, I updated the front page with GM list prices you can get the parts for a lot less, but that is up to you as it looks now at list this is $650 but if you got to one of the discount GM Parts houses you are at 425+ or -
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-13-2010, 12:41 PM   #55
SummoneR
Paul
 
SummoneR's Avatar
 
Drives: '10 2SS/RS M6 "Marauder"
Join Date: Mar 2009
Location: NOR*CAL
Posts: 6,507
Send a message via Yahoo to SummoneR
Quote:
Originally Posted by 2SSRS View Post
OK prices are out for all the parts, I updated the front page with GM list prices you can get the parts for a lot less, but that is up to you as it looks now at list this is $650 but if you got to one of the discount GM Parts houses you are at 425+ or -
Awesome! WOW 572 for the HUD itself! dang. Still sounds pretty resonable to me. Thanks again!
__________________
SummoneR is offline   Reply With Quote
Old 07-13-2010, 01:04 PM   #56
destroyerofu2
xbox360 tag
 
destroyerofu2's Avatar
 
Drives: 2010 inferno orange 2SS
Join Date: Apr 2010
Location: elkhart indiana
Posts: 778
If someone else pays I'll let them use my car to try it out on
__________________
Quote:
Originally Posted by babytiger
And like destoryerofu2 said, WOT should be a moment of silence...
It's mine, like it or not. http://www.camaro5.com/forums/showthread.php?t=108079
destroyerofu2 is offline   Reply With Quote
Old 07-13-2010, 01:37 PM   #57
Blackhawk6

 
Blackhawk6's Avatar
 
Drives: Born:18 Sept 2009 #47903
Join Date: Oct 2009
Location: Gloucester Virginia
Posts: 1,523
HUD

Question: How are you handling the Main Computer System for the car is it capable of accepting the HUD information? Does it require an update or replacement?
__________________
2010 Camaro 2SS________________________________________Litho#140

Blackhawk6 is offline   Reply With Quote
Old 07-13-2010, 01:56 PM   #58
MaddawgXXXL
 
MaddawgXXXL's Avatar
 
Drives: 2010 Synergy Special Edition
Join Date: Apr 2010
Location: Jefferson, NJ
Posts: 97
__________________
MaddawgXXXL is offline   Reply With Quote
Old 07-13-2010, 05:44 PM   #59
Freezy
Synergy Green Lantern
 
Freezy's Avatar
 
Drives: to win.
Join Date: May 2010
Location: Saint Louis MO
Posts: 211
Freezy is offline   Reply With Quote
Old 07-13-2010, 06:30 PM   #60
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Quote:
Originally Posted by destroyerofu2 View Post
If someone else pays I'll let them use my car to try it out on


Quote:
Originally Posted by Blackhawk6 View Post
Question: How are you handling the Main Computer System for the car is it capable of accepting the HUD information? Does it require an update or replacement?

I don't believe it need any update or replacement from the look of the wiring Schematics All you need is to piggy back off the wires in back of the Instrument Cluster.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-15-2010, 07:17 PM   #61
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Got the two parts that are out (The switch and the harness) The bad part is, its not That good of a harness it will only work on a 2011 not on 2010.

But i found the parts to make a new harness that will work on 2010 car's, The HUD unit and the Trim is still not out, If you have any "?" let me know i will try to help.

Here are 5 pic so you can see what the switch looks like and the harness but don't buy it you don't need it.
Attached Images
     
__________________

Last edited by 2SSRS@Gen5diy; 07-15-2010 at 08:01 PM.
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-15-2010, 07:28 PM   #62
Jayhawk500

 
Jayhawk500's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 960
Keep up the good work. I'm really interested in this just like our dash ABL.

Thanks,
__________________
Jayhawk500

2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Fbodfather signed, VIN # 4492, PAID OFF!!!
2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces light up and almost wet their pants....Priceless!!!
Jayhawk500 is offline   Reply With Quote
Old 07-15-2010, 07:39 PM   #63
MacTruck
 
MacTruck's Avatar
 
Drives: Camaro RS
Join Date: Oct 2009
Location: Colorado
Posts: 318
Quote:
Originally Posted by 2SSRS View Post
The bad part is its not That hot of a harness it will only work on a 2011 not on 2010.
What?
__________________
Soon - Camaro Black 1SS/RS Convertible
Piece of Crap Toyota Tundra 4x4 CREWMAX SR5 5.7L
Yeah, I'm 7yrs old
MacTruck is offline   Reply With Quote
Old 07-15-2010, 07:59 PM   #64
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
The harness that you get from GM will not work to put HUD in a 2010 car.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-15-2010, 08:46 PM   #65
MacTruck
 
MacTruck's Avatar
 
Drives: Camaro RS
Join Date: Oct 2009
Location: Colorado
Posts: 318
Quote:
Originally Posted by 2SSRS View Post
The harness that you get from GM will not work to put HUD in a 2010 car.
LOL. Thanks.

So what are your plans then? Are you going to make a harness?
__________________
Soon - Camaro Black 1SS/RS Convertible
Piece of Crap Toyota Tundra 4x4 CREWMAX SR5 5.7L
Yeah, I'm 7yrs old
MacTruck is offline   Reply With Quote
Old 07-16-2010, 09:25 AM   #66
mikejr214
 
mikejr214's Avatar
 
Drives: sliver 2ss
Join Date: Jul 2010
Location: dallas,tx
Posts: 9
Hey guys im sure all you all may have this site but check it out. you get discount prices on gm parts... 2ss/rs hear are some of the prices i found off the part numbers already given. good luck on your upgrade. Im going to try it on my car once you complete yours and give us the details.

www.gmpartsdirect.com

GM PART # 20936211 .....aka HUD
CATEGORY: All
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $572.92
OUR PRICE: $343.75

GM PART # 92227455 ......aka HUD trim bezel
CATEGORY: All
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $10.18
OUR PRICE: $5.80
mikejr214 is offline   Reply With Quote
Old 07-16-2010, 09:45 AM   #67
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Quote:
Originally Posted by mikejr214 View Post
Hey guys im sure all you all may have this site but check it out. you get discount prices on gm parts... 2ss/rs hear are some of the prices i found off the part numbers already given. good luck on your upgrade. Im going to try it on my car once you complete yours and give us the details.

www.gmpartsdirect.com

GM PART # 20936211 .....aka HUD
CATEGORY: All
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $572.92
OUR PRICE: $343.75

GM PART # 92227455 ......aka HUD trim bezel
CATEGORY: All
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $10.18
OUR PRICE: $5.80
Thanks i know of gm parts direct, What i was trying to do is give the list price, I said that it can be got for less.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-16-2010, 05:15 PM   #68
jtzako

 
Drives: 2010 IBM Camaro SS
Join Date: Jun 2007
Location: DFW, Tx
Posts: 1,156
Dont know if there is in fact a diffferent windshield for this car.. but I know HUD does not require it to work, it just wont be as high contrast as with the correct window.
__________________
2010 Camaro SS Imperial Blue | CAI Inc, CAI | Solo Hi Flow Cats | X-Pipe | Backup Camera | PDIM
jtzako is offline   Reply With Quote
Old 07-16-2010, 05:16 PM   #69
mikejr214
 
mikejr214's Avatar
 
Drives: sliver 2ss
Join Date: Jul 2010
Location: dallas,tx
Posts: 9
Quote:
Originally Posted by 2SSRS View Post
Got the two parts that are out (The switch and the harness) The bad part is, its not That good of a harness it will only work on a 2011 not on 2010.

But i found the parts to make a new harness that will work on 2010 car's, The HUD unit and the Trim is still not out, If you have any "?" let me know i will try to help.

Here are 5 pic so you can see what the switch looks like and the harness but don't buy it you don't need it.

Where you say "But i found the parts to make a new harness that will work on 2010 car's".....

Is this something GM or a aftermarket company will make or is this something your making? And if you are making it will you explain the steps also?
mikejr214 is offline   Reply With Quote
Old 07-16-2010, 07:18 PM   #70
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Quote:
Originally Posted by mikejr214 View Post
Where you say "But i found the parts to make a new harness that will work on 2010 car's".....

Is this something GM or a aftermarket company will make or is this something your making? And if you are making it will you explain the steps also?
Let me try to answer this way. The 2011 has all the connectors on the main harness behind the instrument cluster, The 2010 is missing 2 connectors on the main harness.

The first one is a 6 pin with a 14"-22" pig tail to go in the back of the new switch.( That is the new Part i ordered on Wednesday, So i do not have a pic of it at this time, And so you all know that is a $100 pig tail) Don't ask me why List is $166 ( but will have a fix for the cost after i find out it works).

Second connector is an 8 pin that connects to the main harness behind the instrument cluster,( This is the fun one) It then connects to the harness that i have now Part # 92225478 ( That is why i said not to buy this part ) And this Part # 92225478 has a Second 8 pin connector that go's in to the HUD unit. ( got all that) LOL ( look's like this)
@
Put that is not all there is some more wires that will need to connect.

On the switch only 3 connect to the HUD there are Lighting to connect and power all so.

This is only some of the wiring, I will have a lot more as soon as i can, For all the ppl that want it all done for them, I am working on getting a harness that will be easy to connect made....
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-16-2010, 08:20 PM   #71
Jayhawk500

 
Jayhawk500's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 960
Quote:
Originally Posted by 2SSRS View Post
Let me try to answer this way. The 2011 has all the connectors on the main harness behind the instrument cluster, The 2010 is missing 2 connectors on the main harness.

The first one is a 6 pin with a 14"-22" pig tail to go in the back of the new switch.( That is the new Part i ordered on Wednesday, So i do not have a pic of it at this time, And so you all know that is a $100 pig tail) Don't ask me why List is $166 ( but will have a fix for the cost after i find out it works).

Second connector is an 8 pin that connects to the main harness behind the instrument cluster,( This is the fun one) It then connects to the harness that i have now Part # 92225478 ( That is why i said not to buy this part ) And this Part # 92225478 has a Second 8 pin connector that go's in to the HUD unit. ( got all that) LOL ( look's like this)
@
Put that is not all there is some more wires that will need to connect.

On the switch only 3 connect to the HUD there are Lighting to connect and power all so.

This is only some of the wiring, I will have a lot more as soon as i can, For all the ppl that want it all done for them, I am working on getting a harness that will be easy to connect made....
If you need a hand putting a plug-n-play adapter together let me know.
I have the tools already just need to know the connectors and pins/sockets.
__________________
Jayhawk500

2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Fbodfather signed, VIN # 4492, PAID OFF!!!
2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces light up and almost wet their pants....Priceless!!!
Jayhawk500 is offline   Reply With Quote
Old 07-16-2010, 08:44 PM   #72
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,850
Quote:
Originally Posted by Jayhawk500 View Post
If you need a hand putting a plug-n-play adapter together let me know.
I have the tools already just need to know the connectors and pins/sockets.
Thanks for offering to help.

That is the next problem Jayhawk500 The connectors as of this morning are not at any outlet, there are delphi connectors, Will know more on that in 4-5 day or so.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-16-2010, 08:50 PM   #73
Michael_Js
SoCal C5 Family Member
 
Michael_Js's Avatar
 
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M
Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,317
Send a message via AIM to Michael_Js Send a message via MSN to Michael_Js
You're the pioneer!

Thanks!!
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;
Michael_Js is offline   Reply With Quote
Old 07-16-2010, 10:41 PM   #74
camaro4mybday
"Camaro Joe"
 
camaro4mybday's Avatar
 
Drives: 2010 SILVER ICE 2LT/RS CAMARO
Join Date: Feb 2010
Location: long island ny
Posts: 2,339
Send a message via AIM to camaro4mybday
2ssrs im back in the game im back from vac and my assistance is all yours im gonna do some searching for the 6pin connector, i just recently spent like 150 bucks on gm connectors all kinds and types, . can you get a picture of the one on the back of the cluster??
camaro4mybday is offline   Reply With Quote
Old 07-17-2010, 01:35 PM   #75
Jayhawk500

 
Jayhawk500's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 960
Quote:
Originally Posted by 2SSRS View Post
Thanks for offering to help.

That is the next problem Jayhawk500 The connectors as of this morning are not at any outlet, there are delphi connectors, Will know more on that in 4-5 day or so.
Do you have connector numbers?
I think Baringer (sp) Motor Sports may have them.
I have a favorite on the 'puter if you have the numbers.
__________________
Jayhawk500

2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Fbodfather signed, VIN # 4492, PAID OFF!!!
2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces light up and almost wet their pants....Priceless!!!
Jayhawk500 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! RPI Designs Cosmetics and Lighting Modification Discussions 33 10-29-2014 10:35 AM
February 2010 Camaro production & sales figures. Tops Mustang for 9th straight month! Tran 5th Gen Camaro SS LS LT General Discussions 52 03-03-2010 10:39 PM
DEALER ONTARIO CANADA WE SHIP ANYWHERE IN CANADA 2010 CAMAROS FOR SALE IN STOCK NOW! dz Dealer Camaros for Sale 0 03-03-2010 06:43 PM
Zex Nitrous System for 2010 Camaro SS @ BMC Performance! Kris@BMCPerformance Forced Induction 2 02-18-2010 07:59 PM
2010 Chevrolet Camaro makes finalist list for 2010 World Car Design of the Year Tran 5th Gen Camaro SS LS LT General Discussions 37 02-17-2010 05:22 PM


All times are GMT -5. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.