Looking for the muscle car sound? Check out Stainless Works headers and cat backs. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Apex Chase · 08-06-2010, 07:25 PM

APEX Motorsports is committed to bringing you the best parts available for your Camaro and today we are proud to announce the latest addition to our line up.

Stainless Works headers and cat backs are made in the USA from the finest 304L stainless steel by expert craftsmen to exacting standards. These materials will never red rust like the cheaper 400 series stainless materials used by other manufacturers. Stainless Works stands by the quality and workmanship of their products and strives to enhance the experience of their products for the end user.

Camaro5 moderator TAG's full header back Stainless Works system.

Hopper · 08-06-2010, 09:58 PM

Don't have LTH yet, but my ride is sporting a SW catback and I am loving it!

Apex Chase · 08-07-2010, 05:08 AM

Quote:

Originally Posted by Hopper

Don't have LTH yet, but my ride is sporting a SW catback and I am loving it!

Awesome! Give me shout if you have any questions about adding those LTs.

BigBlock427 · 08-07-2010, 03:41 PM

do you have a vid with just the cat-back?

mikeSS · 08-07-2010, 03:53 PM

it sounds good... i like it a little more raspy though

tomanji · 08-07-2010, 04:16 PM

looks like nice quality stuff! I own a scrap metal yard here in NC and all that 304ss makes me drool.. where is the facility for stainless works?

Apex Chase · 08-07-2010, 07:15 PM

Quote:

Originally Posted by tomanji

looks like nice quality stuff! I own a scrap metal yard here in NC and all that 304ss makes me drool.. where is the facility for stainless works?

Its definitely some high quality stuff. They are located in Chagrin Falls, Ohio.

Apex Chase · 08-07-2010, 07:21 PM

Quote:

Originally Posted by BigBlock427

do you have a vid with just the cat-back?

Stainless Works manufactures 6 cat backs for the 5th generation Camaro.

Here is a video of my favorite, the Retro Chambered cat back.

Cam 427 · 08-07-2010, 07:57 PM

An old but important question: Any drone? I have ARH 1 7/8 with catted X pipe with the stock mufflers. Been wanting to replace the stockers, but haven't come across after market mufflers that don't produce drone. I would like to get 3 inch muflers if possible.

BigBlock427 · 08-07-2010, 08:16 PM

wow sounds great thankyou!

Apex Chase · 08-07-2010, 09:13 PM

Quote:

Originally Posted by Cam 427

An old but important question: Any drone? I have ARH 1 7/8 with catted X pipe with the stock mufflers. Been wanting to replace the stockers, but haven't come across after market mufflers that don't produce drone. I would like to get 3 inch muflers if possible.

All of the Stainless Works systems are 3 inch so there are no limitations there. "Drone" is in the ear of the beholder so I hate to give someone my opinion and then have them upset with me because they disagree. I usually suggest talking to several people with the particular system you are interested in and if possible ride in a car equipped with it. That is the only way you will be 100% certain whether or not a particular system is for you.

Apex Chase · 08-08-2010, 07:13 AM

Quote:

Originally Posted by BigBlock427

wow sounds great thankyou!

No problem. I agree!

MG · 08-08-2010, 07:23 AM

I want this exhaust for my L99..............

The car in the video is clearly an LS3, but I was hoping there would be a similar setup to cope with the AFM noise. If there isnt, Ill gladly get an LS3 conversion kit if it means my car can sound that crazy!

Apex Chase · 08-08-2010, 02:50 PM

Quote:

Originally Posted by MG

I want this exhaust for my L99..............

The car in the video is clearly an LS3, but I was hoping there would be a similar setup to cope with the AFM noise. If there isnt, Ill gladly get an LS3 conversion kit if it means my car can sound that crazy!

That system works on either the L99 or the LS3. That being said, I would do the LS3 conversion either way!

Apex Chase · 08-09-2010, 07:25 PM

Quote:

Originally Posted by Cam 427

I would like to get 3 inch muflers if possible.

TAG's car has the full Stainless Works system from the headers back including the 3 inch cat back with mufflers. I'm sure he would be able to provide some valuable feedback.

08-06-2010, 07:25 PM	#1
Apex Chase Drives: it like I stole it. Join Date: Feb 2010 Location: Louisville, Ky. Posts: 17,979	Looking for the muscle car sound? Check out Stainless Works headers and cat backs. APEX Motorsports is committed to bringing you the best parts available for your Camaro and today we are proud to announce the latest addition to our line up. Stainless Works headers and cat backs are made in the USA from the finest 304L stainless steel by expert craftsmen to exacting standards. These materials will never red rust like the cheaper 400 series stainless materials used by other manufacturers. Stainless Works stands by the quality and workmanship of their products and strives to enhance the experience of their products for the end user. Camaro5 moderator TAG's full header back Stainless Works system. __________________ 502.930.2739 \| Contact By Email \|Facebook\|Twitter

08-06-2010, 09:58 PM	#2
Hopper Chevy Lifer Drives: '13 Caddy ATS, '10 2SS/RS ABM M6 Join Date: Oct 2009 Location: Grosse Pointe Woods, MI Posts: 465	Don't have LTH yet, but my ride is sporting a SW catback and I am loving it! __________________ 2010 2SS/RS Manual, ABM, Grey Leather, Painted SIM Rallys, 20" RS Painted Wheels, A9167198

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	79	03-04-2013 09:25 AM
JBA Performance Headers \| Mid-Pipes \| Exhausts \| V6/V8 \| FREE S&H!!!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	100	11-13-2010 03:51 PM
Stainless Works Headers and Exhaust Systems Now Available At APEX Motorsports!!!	Apex Chase	V8 Bolt-Ons & Tunes	7	08-15-2010 07:45 AM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM

08-07-2010, 03:41 PM	#4
BigBlock427 ConceptZer0 Drives: 68 427 Camaro, 11 Camaro TPW 10/18 Join Date: Jul 2010 Location: nj Posts: 923	do you have a vid with just the cat-back?

08-07-2010, 03:53 PM	#5
mikeSS Drives: 2013 E92 M3 Join Date: Nov 2009 Location: MI Posts: 7,314	it sounds good... i like it a little more raspy though

08-07-2010, 04:16 PM	#6
tomanji Drives: 2010 Camaro 2 SS/RS Join Date: Jul 2010 Location: Charlotte Posts: 73	looks like nice quality stuff! I own a scrap metal yard here in NC and all that 304ss makes me drool.. where is the facility for stainless works?

08-07-2010, 07:57 PM	#9
Cam 427 Drives: 2010 2SS Join Date: Apr 2010 Location: Washington Posts: 615	An old but important question: Any drone? I have ARH 1 7/8 with catted X pipe with the stock mufflers. Been wanting to replace the stockers, but haven't come across after market mufflers that don't produce drone. I would like to get 3 inch muflers if possible.

08-07-2010, 08:16 PM	#10
BigBlock427 ConceptZer0 Drives: 68 427 Camaro, 11 Camaro TPW 10/18 Join Date: Jul 2010 Location: nj Posts: 923	wow sounds great thankyou!