Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JDP Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


Reply
 
Thread Tools
Old 12-25-2010, 01:24 AM   #1
Rcfiddy1

 
Rcfiddy1's Avatar
 
Drives: 2010 Rally Yellow 2SS/RS #37115
Join Date: Oct 2009
Location: Manalapan, New Jersey
Posts: 2,019
Glovebox Light #2

I did my glovebox light following previous thread. Thanx jbsrace1 http://www.camaro5.com/forums/showth...light=glovebox
But I used GM part number 13503058 for the light housing using a Led from AAC. Its the same housing as trunk in the Camaro.


I then soldered on 2 wires for the ground and switch.


Here is light mounted after cutting hole with razor knife.


After following previous thread for wiring switch here is finished product.

__________________
Build Thread
ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

Last edited by Rcfiddy1; 02-08-2014 at 05:58 AM.
Rcfiddy1 is offline   Reply With Quote
Old 12-25-2010, 02:15 AM   #2
TAG UR IT
www.Camaro5store.com
 
TAG UR IT's Avatar
 
Drives: 2014 ZL1 #705
Join Date: Jul 2006
Location: SA, Texas
Posts: 26,558
Now THAT is what I need to do!
TAG UR IT is offline   Reply With Quote
Old 12-25-2010, 05:11 AM   #3
mbrusco103

 
mbrusco103's Avatar
 
Drives: 2011 2SS/RS (M6) Twin Turbo
Join Date: May 2008
Location: NJ
Posts: 1,065
Very clean looking install. i like it!
__________________

2011 Camaro 2SS/RS LS3 M6 TT
-AGP Twin Turbo Custom 51/57 Turbos | JRE Tuned | Stainless Works Chambered exhaust | Noweeds | Factory Hurst Short Throw | Black Forgestar F14s | Carbon Fiber GFX | | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler
mbrusco103 is offline   Reply With Quote
Old 12-26-2010, 01:06 AM   #4
SummoneR
Paul
 
SummoneR's Avatar
 
Drives: '10 2SS/RS M6 "Marauder"
Join Date: Mar 2009
Location: NOR*CAL
Posts: 6,277
Send a message via Yahoo to SummoneR
Very Cool!! Thanks!
__________________
SummoneR is offline   Reply With Quote
Old 12-28-2010, 05:51 AM   #5
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 4,296
Nice work. Thanks for sharing

Lupe
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 12-29-2010, 07:29 AM   #6
13lade
 
13lade's Avatar
 
Drives: '11 SIM 2ss/rs LS3 #13363 iom seats
Join Date: May 2010
Location: NoDak
Posts: 262
well done man! If/when I do this, I will be using your idea!
13lade is offline   Reply With Quote
Old 12-30-2010, 09:29 AM   #7
viper1cobra
Member Club Elite #131
 
viper1cobra's Avatar
 
Drives: 1968 & 2010 SIM 2LT/RS Born 041509
Join Date: May 2009
Location: Far West TEXAS
Posts: 1,704
I used an LED light strip with a pressure switch to light my glove box.
__________________
viper1cobra is offline   Reply With Quote
Old 02-13-2011, 01:09 AM   #8
anglwngss
Lone Star Camaro
 
anglwngss's Avatar
 
Drives: 2011 Synergy Green 2SS/RS
Join Date: Oct 2010
Location: Venus, Tx
Posts: 1,679
Just wondering, did both you guys who did this.. use the same pressure switch as jbsrace1? Or did you use something else?
__________________
anglwngss is offline   Reply With Quote
Old 02-13-2011, 02:06 AM   #9
Rcfiddy1

 
Rcfiddy1's Avatar
 
Drives: 2010 Rally Yellow 2SS/RS #37115
Join Date: Oct 2009
Location: Manalapan, New Jersey
Posts: 2,019
Same switch....
__________________
Build Thread
ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.
Rcfiddy1 is offline   Reply With Quote
Old 02-18-2011, 07:24 PM   #10
IamJacksCamaro
 
IamJacksCamaro's Avatar
 
Drives: Camaro LS M6, Fiero, Ford F100
Join Date: May 2010
Location: Ohio
Posts: 638
I think I'll do this. Thanks for posting.
IamJacksCamaro is offline   Reply With Quote
Old 02-18-2011, 07:27 PM   #11
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,275
Once my light cover comes in the mail I'll be doing this. Shouldn't take more than an hour or two
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 02-18-2011, 08:12 PM   #12
Don O
Camaro and Vettehead
 
Don O's Avatar
 
Drives: 2SS/RS IOM L99 69 427/400 Vette
Join Date: Aug 2009
Location: 12 miles East of Disneyland - Anaheim Hills
Posts: 547
I did the same mod too. Nice addition.

Don O
__________________
Nothing sucks more than that moment during an argument when you realize you're wrong.

Don O is offline   Reply With Quote
Old 02-19-2011, 10:57 AM   #13
Jayhawk500

 
Jayhawk500's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 1,031
Glovebox Light #2

Done!
Spent the extra money and ordered the switch connector harness from the dealer.
__________________
Jayhawk500

2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Full Electric Passenger Seat, Fbodfather signed, VIN # 4492, PAID OFF!!!
2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces light up and almost wet their pants....Priceless!!!
Jayhawk500 is offline   Reply With Quote
Old 02-19-2011, 06:01 PM   #14
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,363
Quote:
Originally Posted by Jayhawk500 View Post
Done!
Spent the extra money and ordered the switch connector harness from the dealer.
Could you post the switch connector harness part number please ??
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY - ABL using EL wire, and 3/16" tube camarorick Camaro DIY & HOW-TO instructions & discussions 502 02-25-2014 01:29 PM
Raptor shift light J-Rod6410 Tuning / Diagnostics -- engine and transmission 39 04-12-2011 10:59 AM
Group Buy!!! LED Headlight and Tail Light HALOS, Only $99 Each!!! Wes@Flashtech Exterior Parts & Accessories 51 09-27-2010 08:19 PM
black light paint??!?!?!?!? IcallitROOSTER Cosmetics and Lighting Modification Discussions 2 09-19-2010 03:25 PM
LED Dome Light Panel Installed jammer174 Interior Parts & Accessories 4 03-03-2010 06:34 PM


All times are GMT -5. The time now is 07:07 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.