Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro Issues / Problems | Warranty Discussions | TSB and Recalls

Camaro Issues / Problems | Warranty Discussions | TSB and Recalls Report, discuss and diagnose any issues and problems with your Camaro, including warranty discussions.

Reply
 
Thread Tools
Old 08-11-2010, 03:02 AM   #1
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Exclamation Video clip: After 30 days picked up car now weird noise.

My car finally made it back to me after 27 days of shop time but I wasnt able to pick it up because I was out of the country. The clutch is great now (friction point is a lot higher now ) but anyways when driving home I noticed this squeaking that seems to be coming from the front right tire. Im so jet lagged I recorded this just now at 230 am so the video is dark but sound is very noticeable.

Clip was recorded at 5-10 mph. The noise speeds up as I go faster and then slows down as I slow down. Now its not in the video but I did a slow acceleration to 45 mph and the thing is just squeaking away then there is eventually too much road noise to hear it. Let me know what you guys think. Thanks!
Also no brakes were being applied and car can be in gear or in neutral to replicate sound.
And the extra noise at the end is from turning into gravel driveway.

Be sure to turn your speakers up

CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 03:10 AM   #2
76z28
 
76z28's Avatar
 
Drives: 1976 camaro
Join Date: Jul 2009
Location: bakersfield
Posts: 473
sounds to me like squeekey suspension
76z28 is offline   Reply With Quote
Old 08-11-2010, 03:15 AM   #3
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Quote:
Originally Posted by 76z28 View Post
sounds to me like squeekey suspension
But wouldn't suspension be brought on by bumps? This is brought on by speed. I could be wrong. If it doesn't have wings then I'm out of my element.
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 04:05 AM   #4
Kycamaross
RED JEWEL inthe BLUEGRASS
 
Kycamaross's Avatar
 
Drives: 2010 RJT 2SS/RS, 01 S-10 Xtreme
Join Date: Apr 2010
Location: Northern Kentucky
Posts: 760
What about Belts? What was it in the shop for? Don't know, it almost sounds kind of rythmatic. Like belts maybe. Start it up lift the hood and see if you can hear it while at idle. Maybe have someone rev it just a little. Just a possiblity!!! Hope you figure it out
__________________
Kycamaross is offline   Reply With Quote
Old 08-11-2010, 04:17 AM   #5
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Quote:
Originally Posted by Kycamaross View Post
What about Belts? What was it in the shop for? Don't know, it almost sounds kind of rythmatic. Like belts maybe. Start it up lift the hood and see if you can hear it while at idle. Maybe have someone rev it just a little. Just a possiblity!!! Hope you figure it out
That is what I thought too! But after recording the clip I revved the engine and there was nothing. It noticeably comes from right front. I have an apt. friday for it to be looked at. I would just hate after being away from it for 30 days to have to take it right back to the shop
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 04:19 AM   #6
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Also the car was in the shop for a new shift actuator, leaking slave cylinder and pressure plate. My buddy said check to make sure the that wheel is tightened all the way. I dont think they would have removed the wheels to do the work though
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 04:25 AM   #7
Kycamaross
RED JEWEL inthe BLUEGRASS
 
Kycamaross's Avatar
 
Drives: 2010 RJT 2SS/RS, 01 S-10 Xtreme
Join Date: Apr 2010
Location: Northern Kentucky
Posts: 760
Well maybe not the wheel exactly, but he has a point. The various bolts they have to remove to do the work you mentioned, might be suspect. I feel for you. I would not want to take it back. But, have them check every bolt they removed for tightness. I realize I am stabbing in the dark here. I guess you probably don't know if it did this before it went in? Stupid question it seems, I know!
__________________
Kycamaross is offline   Reply With Quote
Old 08-11-2010, 04:33 AM   #8
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
No it didn't make any noises like this.It almost sounds like a contact chirp. Because it chirps as it speeds up like chirp.............chirp................chirp...... ...chirp.....chirp....chirp...chirp..chirp.chirp.c hirp.chirp.chirp
But who knows. I was just hoping it was just a temporary thing like maybe from sitting so long at the dealer. I hope that it is safe to drive at least until Friday.
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 04:45 AM   #9
Kycamaross
RED JEWEL inthe BLUEGRASS
 
Kycamaross's Avatar
 
Drives: 2010 RJT 2SS/RS, 01 S-10 Xtreme
Join Date: Apr 2010
Location: Northern Kentucky
Posts: 760
Your probably OK till Friday. Oh, well make sure you let the shop hear that clip. I can hear the Chirping your talking about. Hopefully they will have a little more insight than us. Good luck!!!
__________________
Kycamaross is offline   Reply With Quote
Old 08-11-2010, 06:24 AM   #10
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Thanks! Oh I jacked the car up and turned the wheel. There wasnt the chirp but I can hear some kind of friction noise. Took it out driving again and its a lot worse so I am waiting for the dealer to open to take it straight there :(
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 06:52 AM   #11
Caspers2SSRS
Caspers2SSRS
 
Caspers2SSRS's Avatar
 
Drives: Summit White 2010 2SS/RS Camaro
Join Date: Jul 2010
Location: Somewhere north of a midlife crisis.
Posts: 2,871
Hmmmmmmmmm.........Sticking brake caliper/pad sliders pins? The pads aren't releasing entirely........maybe. Should be an easy fix.........with removal, cleaning and the proper lubricant applied at dealer. Updates as you can please...........
__________________
I'm not paranoid, they're following me !
Caspers2SSRS is offline   Reply With Quote
Old 08-11-2010, 07:13 AM   #12
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Quote:
Originally Posted by Caspers2SSRS View Post
Hmmmmmmmmm.........Sticking brake caliper/pad sliders pins? The pads aren't releasing entirely........maybe. Should be an easy fix.........with removal, cleaning and the proper lubricant applied at dealer. Updates as you can please...........
I just hope its not the wheel bearing...That can be bad to drive on. Just weird it happens right after it sat at the dealer for 30 days. I was planning on going to day but I am too tired. Been up for going on 48 hours now. 18 of which I was flying from Korea. I think Ill sleep the day off and just not drive it and wait to my apt on Friday.
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 07:25 AM   #13
BlackIce1066
Black Ice
 
BlackIce1066's Avatar
 
Drives: 2SS/RS Black w/ silver ice stripes
Join Date: Jul 2009
Location: Pueblo,Co.
Posts: 1,524
No it is definatly something rotational. If it was wheel bearing, you can lift the car from the lower control arm and put a hand at 12 o'clock and 6 o'clock position and pull back and forth. If there is any excessive play, it would be a loose wheel bearing.

It almost sounds like a drive shaft scraping against a dust sheild. I would gamble on that. Good luck.
__________________
BlackIce1066 is offline   Reply With Quote
Old 08-11-2010, 07:27 AM   #14
Caspers2SSRS
Caspers2SSRS
 
Caspers2SSRS's Avatar
 
Drives: Summit White 2010 2SS/RS Camaro
Join Date: Jul 2010
Location: Somewhere north of a midlife crisis.
Posts: 2,871
Though hopefully the dealer will get to the bottom of the problem quickly on Friday...........I would only ponder a guess, that if it occurred after sitting idled........That in all likelyhood.......... its nothing serious and something, as I've mentioned that will take a simple bit of preventive maintenance/ cleaning to resolve. Good Luck and do let us know what the dealer determines exactly.......... Casper
__________________
I'm not paranoid, they're following me !
Caspers2SSRS is offline   Reply With Quote
Old 08-11-2010, 07:31 AM   #15
CamaroC-17
Formerly Camaroc5
 
CamaroC-17's Avatar
 
Drives: 2010 Camaro LT/RS M6
Join Date: May 2010
Location: USA
Posts: 1,732
Quote:
Originally Posted by Pontiacfanatic66 View Post
No it is definatly something rotational. If it was wheel bearing, you can lift the car from the lower control arm and put a hand at 12 o'clock and 6 o'clock position and pull back and forth. If there is any excessive play, it would be a loose wheel bearing.

It almost sounds like a drive shaft scraping against a dust sheild. I would gamble on that. Good luck.
IT sounds like it is coming directly from the right wheel though. That seems like I could easily look at that. When I get to highway speeds it sounds like something is about to fly off it is chirping so fast!
CamaroC-17 is offline   Reply With Quote
Old 08-11-2010, 07:45 AM   #16
x626xBlack
ARMY of one.
 
x626xBlack's Avatar
 
Drives: 2011 Black SS/RS
Join Date: Jul 2010
Location: Houston Tx. from Lafayette La.
Posts: 826
A wheel bearing would also make a "grind" when cornering......... I have changed a few on older camaros.
x626xBlack is offline   Reply With Quote
Old 08-11-2010, 08:27 AM   #17
Rage
TRI-COUNTY CAMARO... FTW!
 
Rage's Avatar
 
Drives: 2010 Camaro 2SS M6 Cyber Grey
Join Date: May 2010
Location: South Florida
Posts: 1,990
Could be the bearing......hit a curb once(not too hard)in my 2001 Maxima, made the exact noise you're describing. 1 replaced bearing and good as new!
__________________
CAI inc. cold air intake, LG G6x3 cam, Patriot Gold Extreme Dual springs, Titanium retainers and locks, LG SuperPro 1 7/8 Long Tube headers with full 3" exhaust, DynoMax VT mufflers, SLP 4" tips, Moroso catch can, Race Ready electronic exhaust cut outs, Full painted Razzi body kit, Headlight Armor Smoke taillight and marker blackouts, T-Rex aluminum upper and lower grille, Polished aluminum front and rear bowties. Professionally installed and Dyno Tuned by HorsePower Sales, Pompano Beach FL.
Rage is offline   Reply With Quote
Old 08-11-2010, 08:51 AM   #18
spyderwebb
 
Drives: 2010 Camaro 2SS A99
Join Date: Sep 2009
Location: Wichita,KS
Posts: 72
Really sounds lke a loose wheel, check those lug nuts!

If not that then it may be something to do with the caliper and rotor not alligning correctly. So, other then making sure the wheel is not loose and doesn't fall off on you before you hit the road, I'm sure the dealer can narrow it down pretty quick...I'll bet it is something they didn't put back on correctly.
spyderwebb is offline   Reply With Quote
Old 08-11-2010, 08:35 PM   #19
SS4PK
 
SS4PK's Avatar
 
Drives: 2010SS
Join Date: Apr 2009
Location: VA
Posts: 529
At first I thought you were calling in turkeys. I would take it in for sure, I would check those lug nuts just incase.
__________________

Her Hot Rod.
SS4PK is offline   Reply With Quote
Old 08-11-2010, 10:23 PM   #20
HeavyD

 
HeavyD's Avatar
 
Drives: 1SSRS RY L99
Join Date: Aug 2009
Location: Ontario
Posts: 1,330
To me it sound like the same frequency of tire rotation. Something is scraping with a rotating part of the wheel. Warped rotor, wheel speed sensor scraping the tone wheel, stone stuck in a brake pad, something like that.
HeavyD is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.