6-speed Manual Specifications (SS)

TR6060 6-speed Manual:

The Tremec TR-6060 six-speed manual transmission (M10 gearset) features six forward speeds and one reverse speed. It is derived from the Tremec T-56 6-speed manual transmission. The forward helical cut gears are synchronized while the reverse gear operates through a fully-synchronized constant-mesh system. The TR-6060 sports removable wear pads on the shift forks, and uses aluminum alloys for the main case, extension housing, and clutch housing. It is manufactured by Transmission Technologies Corporation and is rated for 430 ft·lbf (580 N·m) of torque.


2010 CAMARO Transmissions Gear Ratios

Gear #	LS/LT 6-speed automatic (Hydra-Matic 6L50) w/ TAPshift	LS/LT 6-speed manual (Aisin Warner AY6)	SS 6-speed automatic (Hydra-Matic 6L80) w/ TAPshift	SS 6-speed manual (TR6060)
First:	4.07	4.48	4.03	3.01
Second:	2.37	2.58	2.36	2.07
Third:	1.55	1.63	1.53	1.43
Fourth:	1.16	1.19	1.15	1.00
Fifth:	0.85	1.00	0.85	0.84
Sixth:	0.67	0.75	0.67	0.57
Reverse:	3.06	3.67	3.06	3.28
Final Drive:	3.27	3.27	3.27	3.45

Type: Rear wheel drive, six-speed manual overdrive transmission
Engine range: LS3 426 hp
Maximum engine torque: 420 lb-ft ( 569 Nm )
Maximum gearbox torque: 430 lb-ft ( 580 Nm )
Maximum validated gross vehicle weight: 3860 lb ( 1755 kg )
Case material: Aluminum
Center distance: 85 mm
Fluid type: Texaco ATF Type III 1863
Transmission weight: Wet: 66.3 kg (146.2 lb )
Fluid capacity (approx.): Dry: 3.45L +/- 0.06L, ( 117 oz +/- 2 oz. )
Fluid capacity (approx): with cooler line Dry: 3.94L +/- 0.06L, ( 133 oz +/- 2 oz. ) with cooler line fill
Power take off: No
Applications: Chevrolet Camaro SS