Lasted Updated: 12-23-2017

Year: 2013

Model: 2LS

Color: Inferno Orange Metallic

Transmission: Auto

Interior seat/trim color: Inferno Orange & Black

Package Options:

-VIS AMS Carbon Fiber Hood/Hood Pins
-Flow-Tie Conversion
-ZL1 Front Bumper Conversion
-Style 41 ZL Wheels
-Rears - 18x11 - NT05R
-Fronts - 18x8 - NT555
-RPI Taillight Bezels - Inferno Orange
-ZL1 Rear Diffuser Conversion
-Deleted W/W Reservoir & Lines
-Deleted Positive Battery Terminal Bracket
-JOES Racing Products Battery Disconnect - 2 Terminal W/ Panel Red Handle & Rubber Sealant
-Midwest Chassis Bolt-on Parachute Rear Bumper Mount Complete Kit w/Shroud Flag

-Rear Seat Delete (-45lbs)
-RPI Door & Dash Trim - Inferno Orange
-AEM Boost Gauge
-Cipher Harness Bar - Inferno Orange
-Corbeau FX1 Pro Racing Seats
-Corbeau 5pt Harness

-Weight Reduction - 300 lbs
-Twin Turbos GTX2863R
-JacFab Forged Rods
-Diamond Forged Pistons - 10.5:1 Ratio
-Mace Engineering Valve Spring Kit
-RX Performance/Overkill 6L50E custom 4000 stall
-Tracy Lewis Catch Can Signature Kit
-SS Brakes - Four-piston fixed Brembo calipers
-14.4in Rotors
-Rear Seat Delete (-30lbs)
-3in Turbo-Back Exhaust (-40lbs)
-JacFab LFX Ported Intake Manifold
-Overkill 80mm Throttle Body
-ZL1 Fuel Pump w/Control Module
-BMR Suspension
-Driveshaft Safety Loop
-Lower Control Arms; Rear; Non-Adjustable
-Toe Rods; Rear; Non-Adjustable
-Trailing Arms
-Extreme Anti-Roll Kit - 32mm
-Front Sway Bar - 29mm
-B&M Trans Cooler
-3.27 LSD SS Diff
-SS Rear Axles and Axle Hubs
-AEM V2 Water/Methanol Injection Kit
-AEM V2 Water/Methanol Injection Nozzle & Jet Kit
-AEM V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level Sensor
-AEM Water/Methanol Injection Inline Filter
-DSS 3.5" 1pc Aluminum Driveshaft

-4L80E Trans Swap w/Trans Brake
-Electric Water Pump
-8.5 Certified Roll Cage
-Davis Technologies "Bump Box
-Remount Battery
-Braille Battery – 17lbs (OEM is 44lbs)
-Dark Star Drag Pack w/Skinnies - 17x4.5 & 17x10.5
-Reroute Fusebox & ECU
-Secondary Fuel Setup
-Optic Armor - Front 1/4” Rear 2/16”
-Rear-Mounted Radiator
-Custom Grinded LFX Cams (Fuel Lobe)
-3.5" MAF Tube
-(Upgrade to GTX30's – Top Mount)
-Quarter Panel Exhaust Dumps
-Drag Wing
-Upgrade AEM Meth Lines and Fittings
-Body & Paint Work
-8.5 Certified Roll Cage – Paint IOM
-Drag Wing – Paint IOM
-Strip Seam Sealer in Trunk and Rear Seat Area
-Cut Off Rear Tub
-Clean Up Passenger Side Strut Tower – Paint IOM
-Paint Interior – Trunk & Rear Seat Area IOM
-Door Panel Deletes – Paint IOM
-Repaint Brembo Calipers – IOM