Showing Visitor Messages 11 to 20 of 81
-
hi Ted
i was told to reach out to you
did a cam install in my ls3. The cam is texas speed stage 2, 229/244 .629"/.615" . I also installed a new oil pump, timing chain and sprocket, lifters, push rods, valve springs, rockerarm trunion upgrade, heads cnc ported, spark plugs, and LT headers. When i went to start the motor for the first time, it was misfiring a lot through the exhaust. it sounds like gun shots. The check engine light came on with code P0300 (multiple cylinder misfire) after this happened, i removed all the spark plugs and found them to all be soiled except for cylinder # 1 & 5. I checked compression on all of the cylinders, they were all at 190 psi except for 1 &5, they were at 170 psi. after doing that i checked for spark on all coils, spark plugs, and spark plug wires. Fuel injectors were also good, because i made sure they all sprayed duing the cam install. I am not sure why this is happening. Any advice would be greatly appreciated
-
I have a 2010 SS and will install an exhaust system soon. Right now I am thinking 1-7/8" Kooks long tube headers w/ceramic coating and Borla ATAK mufflers. Looks like Maryland has this system with cats for $2500. Since I live in Preston CT, I would prefer to get the system from you. Can you match that price? I can pick it up if you have it in stock. I would also need a tune after installation.
Also the left front fender, bumper and upper fascia on the Camaro is damaged and will need replacing. Do you sell the ZL1 upgrade kit that would replace the damaged stock parts? Do you know of a good body shop to inspect the damage (hopefully it is cosmetic) and perform the upgrade? If so, I can send some pics and we can discuss my options.
Thanks
Tim E.
-
How much do you charge for a tune... Just have LTHs on my 2014 camaro ss... Have light on for slow o2 reading.... Being a disabled vet I'm on a fixed income. Can't be paying crazy prices... Can you help?
-
Have a 2014 spring edition 2lt. Going to get the CAI intake, does the JRE Scoop need the bottle relocation and will it fit my 14? Also any breaks for camaro5 members?
-
Awesome insight I know u know you're stuff man thx hey Ted I got 59lb injectors should I upgrade injectors also? And after I get you're superpulley and zl1 fuel pump from 480 rwhp what rwhp would I be at with 3.3" Maggie pulley? I live in Los Angeles I'm looking for someone that could know as much as u thx
-
Hi Ted, I recently did a pulley upgrade on my Maggie supercharger runing about 9.5 psi of boost with a 3.3" pulley. It used have 3.6" and it has POWER unlike before. The tuner said it was runing 480 rwhp with cai and magnaflow catback only, no headers. I asked the performance shop if 3.3 was to low he said it was perfect can't go lower. Am I good or should be worried. Thx Please help
-
Yes I was wondering about the SCT X4 to the Livewire version which would be best and also if they are better then Hypertech.
-
Hey Ted. You were giving me information in regards to my 2014 zl1. Can you give me more info in regards to the headers and exhaust please. What I'm looking for is that throaty muscle car sound and hp gains of course. This being said, can I utilize my existing pipes, and delete the cats, and just put tips?
And what headers do you recommend?
-
I can not recommend changing the timing without knowing what your running now and exactly what your set up it and what the tune looks like.
If you would like to purchase a Custom JRE Tune I can Help you.
Thanks
Ted.
-
hi i have an SCT SF3 and was womder on the adjust option with the spark 0k-4k and 4k-8k its automatically set at 0 degrees on the tuner and has option to add 2 degrees or take out -2,-4,-6 im kinda lost what should i run