Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - Supercharged SS / Slowhawk Performance Build Begins......Now

Page 2 of 30

Show 40 post(s) from this thread on one page

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)

- - Supercharged SS / Slowhawk Performance Build Begins......Now (https://www.camaro5.com/forums/showthread.php?t=326799)

MikeOD

11-05-2013 08:57 PM

Quote:

Originally Posted by Slowhawk (Post 7160668)

It will be a fun build and we have plenty of time so we do not have to rush and over spend to get done ASAP.
The reason for the 416 is because we wanted a better crank that will take the load of the ysi pulling on it, so why not go with a 4" stroke. The bigger cubes will make more low end power/ torque which helps keep a more street friendly converter.
My goal is 800- 850 rwhp at 6200 rpm for now. That should be very safe on the motor and put this car safely in the 9's on a bad pass. ( my dyno reads low)

Right now we are waiting on the pistons to be made. Should be about 2 weeks to get in.

You know full well you're going to make 800-850 on that setup by accident with a stupid safe tune...:)

VanquisherSS

11-05-2013 09:02 PM

Quote:

Originally Posted by SSE 4 2SS (Post 7160686)

:bellyroll:

:bellyroll:

Post of the decade....

:sm0::sm0::sm0::sm0::sm0:

Chris82xx

11-05-2013 09:13 PM

Quote:

Originally Posted by MikeOD (Post 7160720)

You know full well you're going to make 800-850 on that setup by accident with a stupid safe tune...:)

That'll be made without meth. Are you going to use a cog setup, or will you be using a 10-rib pulley?

Muddflap

11-05-2013 09:21 PM

Congrats bro.... I will be following this build!!

Detoxx03

11-05-2013 09:38 PM

Now this is a build to look forward to. Finally getting rid of the heat pump for a more efficient blower and complete setup.

CyberPredator

11-05-2013 09:38 PM

Good move. Now we will get to see what your car does with power.

RBL	11-05-2013 10:07 PM

I am very interested in this build and to see your opinions on the YSI vs the roots one you drive the car.

Pro Stock John

11-05-2013 10:11 PM

Very nice, subscribing. I had one of the first custom YSI setups for a 4th gen way back in 2004. :)

02bluess

11-05-2013 10:31 PM

Glad to hear you're moving forward, good luck Jamie!!

Paul...

grocerygetter

11-05-2013 10:36 PM

Rawk on!

Fast6.3

11-06-2013 12:37 AM

that build is going to rock congrats cant wait for the results
damm I wish I had that kind of money for a build of this type

Supercharged SS

11-06-2013 04:56 AM

Quote:

Originally Posted by Fast6.3 (Post 7161196)

that build is going to rock congrats cant wait for the results
damm I wish I had that kind of money for a build of this type

Yeah, me too. Right now I'm Dons Bitch for the next 15 years.

My disposable engine deal is over. This one will last.

Supercharged SS

11-06-2013 04:57 AM

Quote:

Originally Posted by Chris82xx (Post 7160763)

That'll be made without meth. Are you going to use a cog setup, or will you be using a 10-rib pulley?

Matt said 10 rib. It's up to those guys.

nyny69

11-06-2013 05:05 AM

Quote:

Originally Posted by Supercharged SS (Post 7161324)

Yeah, me too. Right now I'm Dons Bitch for the next 15 years.

My disposable engine deal is over. This one will last.

And this is the problem with you. Always someone's bitch.:pound:

All times are GMT -5. The time now is 03:13 PM.

Page 2 of 30

Last »

Show 40 post(s) from this thread on one page