Quote:
I'm sure someone else will come in an advise you. You might be better off starting a new thread in the main thread area and pointing back to this one. Something like NEED HELP and pointing to this thread could probably get the traffic you need to the thread for the right person to eventually come in and tell you what you need to do. |
k, ill try.-thanks
|
Quote:
you'll probably get more replies during the week.. weekend folks are out enjoying the weather. |
Quote:
Very cool thread though seriously. |
key fob problem
I bought a key fob from Ebay and had it cut by a local locksmith. So far so good. Then I did the program steps from this thread, old key on & off, new key on & off. now the key fob will unlock and lock doors but will not open trunk or start car. Anyone else run into this? Is this a faulty fob or something I am doing wrong?
|
It works !!!!!!!!!!!!!!!!!!!!!!
:happyanim:
Quote:
IT WORKED FOR ME ! IT TOOK 10 SECONDS TO PROGRAM THE KEY ! :happyanim::happyanim: THE LOCK AND UNLOCK BOTTONS WORK ON THE REMOTE, AND THE CAR STARS. PERFECT ALSO!:thumbup::thumbup: I bought the key online with out giving them the VIN number. I had it cut at a locksmith and programed it my self this way THIS IS THE WAY TO DO IT.:chevy: |
I Have two used, like new fobs for sale....yOU WOULD JUST NEED TO GET THE KEY PART TO PUT ON THE FOB, AS THIER ALREADY CUT....
|
I have to punch this thread to the top. I continue to be amazed at how fantastic this little Camaro community is.
My key fob, well one of the buttons fell out / broke out. I ordered a blank using the links on here (to ebay) for $27. I received the blank in the mail yesterday. I started trying to take it apart and that was a bit of a nightmare as I think they are glued. So I found this thread. I used the information to punch the pin out and swap the key for the key in the blank and then used the second key to my car to program the blank using the instructions on this thread. For a whopping $27 I have a brand new Key fob and I didn't need to waste a half day at the dealer or pay absurd prices to do in about 10 seconds what I did moments ago. Thank you guys!!!!!! |
hi, my camaro 2010 rs key was stolen, and a frind give me a new one, but this was used and programing for his car, you know how can i reprogram the key?
|
Quote:
|
Has anyone attempted this on a '13?
|
I lost my spare key fob to my 2010 Chevrolet Camaro LT RS and called my dealer for a quote. He said it would have to be ordered from the parts warehouse pre-cut and would cost me $140. That is ridiculous. Can I order a new key fob from GM Parts Warehouse and have a locksmith laser cut it???
|
key/fob
Quote:
What dealer gets is a rip off, and there is no laser cutting on the key.. Any key/lock place thats has the machine , will tell you that is what gm calls it laser cut, but shops have cutters to do it.. If ya find a local place that sells key and fob's [ yes you can get them seperate ] I would be more than happy to sell my fob;s as i have no use for them.. The place that does them here is called , Glad security.. and im near syracuse N.Y. here is link. http://www.gladdsecurity.com/ |
Glad security near syracuse ny, sells and cuts keys. -And no is not laser.
Cut by machine.. I had orig equip fob programed and key cut for 60.00 plus tax. Here is link to thier sight.- I used them, as i work for chrysler and need a place to cut thos type of key/fob Thier called side winder keys http://www.gladdsecurity.com/ |
All times are GMT -5. The time now is 11:44 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.