Got my springs and sways........installed.......with VIDEO
4 Attachment(s)
Holy Crap. I can't find anyone who will install these damn things. I can't lift my car good enough and would feel better if someone who knew what they were doing would show me or just do it.
I've called around everywhere and most don't know what I'm talking about. :iono: Some will ask for instructions and ask if it's a kit or something. :facepalm: So I guess I'll just do it the best way I can. For those who have done it. Can I do it on jack stands? Or do the wheels need to come off? Pfadt installation video 56k users... good luck http://www.youtube.com/watch?v=_gSLK...9&feature=plcp Ok. Can't really see the difference. I guess because the befores were taken on a sunny day and the black makes it hard to see the gap in the afters but here you go for now. It's true, pics don't do this drop justice at all. Perfect drop in my opinion. Before pics.....................................After pics Attachment 95603 http://www.camaro5.com/forums/attach...4&d=1265506877Attachment 94930 http://www.camaro5.com/forums/attach...6&d=1265506877Attachment 94931 http://www.camaro5.com/forums/attach...8&d=1265506877Attachment 94932 And one with a clients car in the lot. :evil: http://www.camaro5.com/forums/attach...2&d=1265506877http://www.camaro5.com/forums/attach...3&d=1265506877 |
Quote:
The front sway bar may require lifting the engine to get it into place. You should be able to remove and install the rear bar pretty easily, Good Luck:thumbsup: :burnrubber: |
Here you go man... NineBall wrote a great article on this a couple weeks ago...
http://www.planetlsx.com/tech/How_To...010_Camaro/131 :thumbsup: |
Quote:
Quote:
|
Quote:
The sway bars arent' covered though. I wonder if this is why D1BADZ didn't do his front yet? All the shops I talked to that said they'd look into it and call me back (which is only 3) never called back. |
Quote:
|
Quote:
Quote:
http://www.pfadtracing.com/blog/wp-c...structions.pdf |
The more room underneath is better. You have to turn and twist the front sway to get old out & new in.
Be very careful on spring installation. Do not let them use air tools to install struts back on car. Hand tools only & torque wrench! You can over torque the nuts and break something. Also, be sure they don't spin the shock shaft, that can break the seal & cause shock to fail (been there). You are going to LOVE the end results! |
Quote:
I decided to do them myself. I'll have to buy a torque wrench. :rolleyes: The doc. I linked below has all the numbers so I should be ok. :emoticon14: Anyone else with any advice, I could use it. :bow: |
local GM will install as accessories(a little cheaper), but still contemplating on putting them on myself(just need torque specs). just waiting for warmer weather and a free weekend..:rolleyes:
|
Quote:
http://www.pfadtracing.com/blog/wp-c...structions.pdf I'm gonna do it in the cold. :suicide: |
Call an auto repaiir shop, most will want the Labor only. More profit that way..
|
Quote:
|
Have that Hottie help you like mine did!!!!
Very easy....just go slow and you will be fine!! Good luck |
All times are GMT -5. The time now is 09:34 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.