Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

zebra 06-16-2012 07:50 AM

Quote:

Originally Posted by JusticePete (Post 5135874)
...
Quote:

Originally Posted by speedster (Post 5129270)
Quote:

Originally Posted by zebra (Post 5128358)
...
you quickly learn ... the fine art of going up/down down every incline/decline at a 45* angle

Yes, the all important 45 deg angle of attack...:headbang:

:iono:

What ever happened to the real car guys? They weld the exhaust in place so they don't have to worry about a little scrape here and there and they knew the :rules: -- exhaust, headers and cats are SELF CLEARANCING. As for front and side fascias they keep painted spares in the garage painted and ready to go. :thumbup: If they even contemplated racing they knew their car couldn't possibly be low enough if it didn't throw sparks when you hit the brakes let alone the little bumps in the gas station.

There is no whining or complaining if you own a Muscle Car :paddle:

This is the end of this Public Service Announcement.

the 45* is in reference to not plowing the front end into any gradient more than 1* - not some pansy gas filing ports :thumbsup:







ya know... for the guys who actually went that low ;)

Mr Twisty 06-16-2012 08:28 AM

Looks good with the stock upper grill and ZL1 lower :thumbsup:

JusticePete 06-16-2012 12:29 PM

Quote:

Originally Posted by zebra (Post 5136404)
the 45* is in reference to not plowing the front end into any gradient more than 1* - not some pansy gas filing ports :thumbsup:







ya know... for the guys who actually went that low ;)

Why would Chris need a 45 degree approach angle when he drives THIS?

http://www.camaro5.com/forums/attach...2&d=1338928722

garcmol 06-16-2012 02:51 PM

Quote:

Originally Posted by mlee (Post 5135563)
...but mine was faster...;)

You got me there! :laugh:

speedster 06-16-2012 04:24 PM

Hey, I bet you could sell those up north as High Performance 'snow removal' equipment. What a deal for local municipalities. What used to take a truck 3 hours can now be done with a THR Camaro in 45 minutes...:D

Quote:

Originally Posted by JusticePete (Post 5137399)
Why would Chris need a 45 degree approach angle when he drives THIS?

http://www.camaro5.com/forums/attach...2&d=1338928722


600hp-lpe 06-16-2012 08:28 PM

Quote:

Originally Posted by JusticePete (Post 5135874)

What ever happened to the real car guys? They weld the exhaust in place so they don't have to worry about a little scrape here and there and they knew the :rules: -- exhaust, headers and cats are SELF CLEARANCING. As for front and side fascias they keep painted spares in the garage painted and ready to go. :thumbup: If they even contemplated racing they knew their car couldn't possibly be low enough if it didn't throw sparks when you hit the brakes let alone the little bumps in the gas station.

There is no whining or complaining if you own a Muscle Car :paddle:

This is the end of this Public Service Announcement.

Chris...sick MRS. GTAHAVIT on DEB. That'll get Pete to FLY STRAIGHT...:yikes:

He just cost you.. about $6-7K in spare, throw away parts (according to Pete's replacement swap policy, above).

Self clearanceing exhausts in the old days were 2 hundred bucks. Not on today's Camaro.. and you havn't even swapped the front end yet.

BAD BAD BAD!!!!

Redemption 06-16-2012 08:36 PM

Quote:

Originally Posted by 600hp-lpe (Post 5138965)
Chris...sick MRS. GTAHAVIT on DEB. That'll get Pete to FLY STRAIGHT...:yikes:

He just cost you.. about $6-7K in spare, throw away parts (according to Pete's replacement swap policy, above).

Self clearanceing exhausts in the old days were 2 hundred bucks. Not on today's Camaro.. and you havn't even swapped the front end yet.

BAD BAD BAD!!!!

Qft


Oh snap. Just Got real in here!!

speedster 06-17-2012 07:16 AM

Quote:

Originally Posted by 600hp-lpe (Post 5138965)
Chris...sick MRS. GTAHAVIT on DEB. That'll get Pete to FLY STRAIGHT...:yikes:

He just cost you.. about $6-7K in spare, throw away parts (according to Pete's replacement swap policy, above).

Self clearanceing exhausts in the old days were 2 hundred bucks. Not on today's Camaro.. and you havn't even swapped the front end yet.

BAD BAD BAD!!!!


I remember flattening two of the primary pipes on a set of headers during a 'clearance' run. Back then, you went to a welding shop, they cut out the flat pieces and welded in new pipes. Heck on those Hooker Super Competition headers, the welding shop replaced that section with roll cage tubing. Never had them bend there again... :bellyroll:

600hp-lpe 06-17-2012 10:56 AM

My '67 Camaro would jack the wheels in 2nd and 3rd gear 2feet off the ground.. sending sparks on landing from the exhaust. I had spare headers and swapped them like oil changes. No problem at around $100 a pair.

Those were the good old days...

JusticePete 06-17-2012 02:19 PM

Do it like the pros and use carbon fiber protection. http://www.dragonplate.com/ecart/categories.asp?cID=127

GTAHVIT 06-18-2012 09:53 AM

Quote:

Originally Posted by 600hp-lpe (Post 5138965)
Chris...sick MRS. GTAHAVIT on DEB. That'll get Pete to FLY STRAIGHT...:yikes:

He just cost you.. about $6-7K in spare, throw away parts (according to Pete's replacement swap policy, above).

Self clearanceing exhausts in the old days were 2 hundred bucks. Not on today's Camaro.. and you havn't even swapped the front end yet.

BAD BAD BAD!!!!

I know!! :D I don't have it yet to swap... :(

Quote:

Originally Posted by JusticePete (Post 5141527)
Do it like the pros and use carbon fiber protection. http://www.dragonplate.com/ecart/categories.asp?cID=127

There is a whole 'nother level you can go to isn't there....

JusticePete 06-18-2012 03:17 PM

Quote:

Originally Posted by GTAHVIT (Post 5145611)
I know!! :D I don't have it yet to swap... :(



There is a whole 'nother level you can go to isn't there....

I thought I was done once, but then I found out that done is a relative term :D

garcmol 06-18-2012 03:32 PM

Quote:

Originally Posted by JusticePete (Post 5147528)
I thought I was done once, but then I found out that done is a relative term :D

Done............ :rolleyes: Should be in the family of "Soon" :bellyroll:

JusticePete 06-18-2012 03:33 PM

Quote:

Originally Posted by garcmol (Post 5147644)
Done............ :rolleyes: Should be in the family of "Soon" :bellyroll:

:laughabove: :bellyroll: :sm0:

Has TRAN announced the location and dates for C5FEST IV?

Mrs GTAHVIT 06-19-2012 01:16 PM

Just stopping in to say HI :wave:

The Stig 06-19-2012 01:33 PM

Quote:

Originally Posted by garcmol (Post 5147644)
Done............ :rolleyes: Should be in the family of "Soon" :bellyroll:

what's wrong with "soon" ? We use it all the time :bellyroll:

Mindz 06-19-2012 01:41 PM

Yeah, what's wrong with "soon"? It gets the point across, right?

garcmol 06-19-2012 01:49 PM

Quote:

Originally Posted by stieger (Post 5153182)
what's wrong with "soon" ? We use it all the time :bellyroll:

Nothing, we use it as much as "done" :laugh:

Quote:

Originally Posted by Mindz (Post 5153246)
Yeah, what's wrong with "soon"? It gets the point across, right?

I'll get the point............................................. ... soon :D

GTAHVIT 06-19-2012 02:08 PM

Quote:

Originally Posted by Mrs GTAHVIT (Post 5153073)
Just stopping in to say HI :wave:

:D Hiya!

Mrs GTAHVIT 06-19-2012 02:15 PM

Quote:

Originally Posted by GTAHVIT (Post 5153437)
:D Hiya!

:wub:



Now get back to work! :paddle:




:bellyroll:

garcmol 06-19-2012 02:18 PM

Quote:

Originally Posted by Mrs GTAHVIT (Post 5153073)
Just stopping in to say HI :wave:

Quote:

Originally Posted by GTAHVIT (Post 5153437)
:D Hiya!

Quote:

Originally Posted by Mrs GTAHVIT (Post 5153477)
:wub:



Now get back to work! :paddle:




:bellyroll:


The 'mrs' has spoken. Get to it. :bellyroll:

GTAHVIT 06-19-2012 02:25 PM

Fine... :emoticon3:

:laugh:

Mrs GTAHVIT 06-19-2012 02:33 PM

Quote:

Originally Posted by garcmol (Post 5153496)
The 'mrs' has spoken. Get to it. :bellyroll:

:headbang:

:wave:


I cant say much... I should be studying :cry:

The Stig 06-19-2012 02:34 PM

*cue whip cracking noise*

Mr Twisty 06-19-2012 05:01 PM

She's a keeper, Mr GTA :thumbup:

JusticePete 06-19-2012 05:05 PM

Mrs. GTA, Can Chris come out and play?

Mrs GTAHVIT 06-19-2012 07:38 PM

Quote:

Originally Posted by JusticePete (Post 5154651)
Mrs. GTA, Can Chris come out and play?

Hang on... :iono: let me check....
CHRISSSSSS....
Are the floors swept, mopped, and vacuumed…
Laundry folded and put away????....
(Chris' response) No I am so sorry my most wonderful, smart, always right, beautiful, wife, not yet... I am getting on it right now! :facepalm:

Hey Pete, sorry Chris said he is ummmm.. working… ummm… on his….. car. Yeah his car, and when he gets done he will come out and play... :D

zebra 06-19-2012 07:43 PM

:laugh: that sounds about right

speedster 06-19-2012 07:53 PM

Quote:

Originally Posted by Mrs GTAHVIT (Post 5155446)
Hang on... :iono: let me check....
CHRISSSSSS....
Are the floors swept, mopped, and vacuumed…
Laundry folded and put away????....
(Chris' response) No I am so sorry my most wonderful, smart, always right, beautiful, wife, not yet... I am getting on it right now! :facepalm:

Hey Pete, sorry Chris said he is ummmm.. working… ummm… on his….. car. Yeah his car, and when he gets done he will come out and play... :D

Wait for it.... You can hear it... The sound of the whip cracking... :D
Now Chris, I need you to _______________________ and then ________________and then _________________.
OK, now you can go play with THR22. :)

mlee 06-19-2012 08:14 PM

:popcorn: the mood in here sure has changed...

SSE 4 2SS 06-19-2012 08:32 PM

Quote:

Originally Posted by mlee (Post 5155659)
:popcorn: the mood in here sure has changed...

No doubt,

Time to kick Chris out the he man woman haters club...

:bolt:

mlee 06-19-2012 08:34 PM

Yup... Chris has no business in here unless he has permission...:paddle:

JusticePete 06-19-2012 08:39 PM

Quote:

Originally Posted by Mrs GTAHVIT (Post 5155446)
Hang on... :iono: let me check....
CHRISSSSSS....
Are the floors swept, mopped, and vacuumed…
Laundry folded and put away????....
(Chris' response) No I am so sorry my most wonderful, smart, always right, beautiful, wife, not yet... I am getting on it right now! :facepalm:

Hey Pete, sorry Chris said he is ummmm.. working… ummm… on his….. car. Yeah his car, and when he gets done he will come out and play... :D

You and Deb are going to get along too well.

garcmol 06-19-2012 09:23 PM

Quote:

Originally Posted by mlee (Post 5155659)
:popcorn: the mood in here sure has changed...

Mood? Or Mod?

:bellyroll:

The Stig 06-19-2012 10:09 PM

Quote:

Originally Posted by mlee (Post 5155785)
Yup... Chris has no business in here unless he has permission...:paddle:

Chris needs permission to be in his own build thread :bellyroll:

PQ 06-19-2012 11:13 PM

Quote:

Originally Posted by garcmol (Post 5156072)
Mood? Or Mod?

:bellyroll:

:sm0:

mlee 06-19-2012 11:32 PM

Quote:

Originally Posted by garcmol (Post 5156072)
Mood? Or Mod?

:bellyroll:

Exactly :laugh: Need to change her username to RED

zebra 06-19-2012 11:35 PM

shoot... who knows?

maybe she's really Tran & Chris has been telling the truth the whole time?! :confused0068:

PQ 06-19-2012 11:42 PM

Quote:

Originally Posted by zebra (Post 5156986)
shoot... who knows?

maybe she's really Tran & Chris has been telling the truth the whole time?! :confused0068:

http://www.camaro5.com/forums/pictur...ictureid=59410

The Stig 06-20-2012 07:28 AM

Quote:

Originally Posted by zebra (Post 5156986)
shoot... who knows?

maybe she's really Tran & Chris has been telling the truth the whole time?! :confused0068:

OMG.


All times are GMT -5. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.