Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Lukeko's Build (BOT) and (Tribute) - [COTW 4/9/12] (https://www.camaro5.com/forums/showthread.php?t=214185)

Tribute 04-10-2012 11:18 AM

Quote:

Originally Posted by bowtie_beauties (Post 4782651)
Nice Ride!!!! :clap:

On your parts list, you mention a few ZL1 parts found at gmpartshouse.com. On their site, I can't find a listing for the ZL1. Is there something I'm missing - or am I looking in the wrong place? I'm especially interested in the side skirts. Thanks for any info.

Here is a link to their thread on the ZL1 rockers.

http://www.camaro5.com/forums/showthread.php?t=197534

lionssfan 04-10-2012 11:31 AM

Quote:

Originally Posted by Lukeko (Post 4782474)
Thanks guys for the kind words!



Thanks Lionssfan - the black car is a ZL575 all done at SLP. His exhaust is a little bit louder than mine because he has their Longtube Headers as well. The axle back he has is the powerflo versus Loudmouth II. It does sound great. I'm looking to one day get the SLP LTs installed as well, they are supposed to sound deeper and louder matched up with the Loudmouth II. There is a video on the exhaust compilation thread. To answer your PM about his wheels. Those are also from SLP, they were the ones used for their ZL1 car.

thanks for your detailed response!!! very helpful. thanks Dan

Tribute 04-10-2012 12:35 PM

Quote:

Originally Posted by lionssfan (Post 4783598)
thanks for your detailed response!!! very helpful. thanks Dan

Sure thing, Dan. :thumbsup:

blacksanta 04-10-2012 12:56 PM

Love your ride man. I just bought a 2012 Camaro and excited to join the forum. Where is the performance shop you had your work done? I'm very interested in getting work done since this not my daily drive. I look forward to hearing from you.

Black Santa

Kronix 04-10-2012 12:59 PM

Quote:

Originally Posted by blacksanta (Post 4783972)
Love your ride man. I just bought a 2012 Camaro and excited to join the forum. Where is the performance shop you had your work done? I'm very interested in getting work done since this not my daily drive. I look forward to hearing from you.

Black Santa

I can answer that for Luke since I did something similar

http://slpcars.com/

If you go SLP, you won't be disappointed!

Tribute 04-10-2012 02:14 PM

Quote:

Originally Posted by blacksanta (Post 4783972)
Love your ride man. I just bought a 2012 Camaro and excited to join the forum. Where is the performance shop you had your work done? I'm very interested in getting work done since this not my daily drive. I look forward to hearing from you.

Black Santa

Quote:

Originally Posted by Kronix (Post 4783987)
I can answer that for Luke since I did something similar

http://slpcars.com/

If you go SLP, you won't be disappointed!

Thanks Kronix for posting the link!

Black Santa - I see you are in my area. I'm going to PM you the local SLP rep that took good care of me. You should give him a call. You are welcome to contact me as well with any questions. He is going to be in the area next week too, you can setup a time to check out and test drive a ZL car to see if it's enough umph for you.

Tribute 04-10-2012 02:19 PM

I just realized they have my car on their site gallery: cool :headbang:

http://slpcars.com/?page_id=79&paged=2

SS4PK 04-10-2012 04:47 PM

Lukeko,

Looks great. I'm in VA now, do you keep the front plate off and put it on? When? I folded my plate and fit it in the lower opening. According to the law if you don't obstruct anything on the plate it' legal, so folded it to the numbers.

Tribute 04-10-2012 05:20 PM

Quote:

Originally Posted by SS4PK (Post 4785029)
Lukeko,

Looks great. I'm in VA now, do you keep the front plate off and put it on? When? I folded my plate and fit it in the lower opening. According to the law if you don't obstruct anything on the plate it' legal, so folded it to the numbers.

Hi SS4PK - its great to have another local C5er around. Where abouts in VA? I usually keep the front plate off. I keep the plate and bracket in the trunk in case I get pulled over. So far ive been lucky, depending on where you are laws can be enforced more.

Interesting idea folding the plate. Do you have pics? I know they usually like to see the expiration tags, but thats what rear plates are for.

Abstrak 04-10-2012 05:28 PM

Thanks Abstrak - I appreciate it. Are you going to Edog's meetup on the 29th down in Fredericksburg? Looks like around 40-45 C5ers are heading there.[/QUOTE]

Yea I plan on hitting up all the meets this month and next weather permitting.

AUS10BMX 04-10-2012 05:32 PM

Congrats on COTW! Everything looks meant to be on your ride, definitely no corners cut on that machine! :w00t:

Tribute 04-10-2012 05:44 PM

Quote:

Originally Posted by Abstrak (Post 4785225)
Thanks Abstrak - I appreciate it. Are you going to Edog's meetup on the 29th down in Fredericksburg? Looks like around 40-45 C5ers are heading there.

Yea I plan on hitting up all the meets this month and next weather permitting.[/QUOTE]

Sounds good man, I'll see ya around.

Quote:

Originally Posted by AUS10BMX (Post 4785252)
Congrats on COTW! Everything looks meant to be on your ride, definitely no corners cut on that machine! :w00t:

Thanks, I really appreciate the nice compliments!

Tribute 04-10-2012 08:07 PM

Crazy, none of my images are showing up anymore from Photobucket. It says too many views. Lol. Looking into it now.

Tribute 04-10-2012 08:20 PM

Fixed


All times are GMT -5. The time now is 09:05 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.