Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (https://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   ZL1 diff kit (https://www.camaro5.com/forums/showthread.php?t=402366)

MA2010SS 03-31-2015 06:47 PM
ZL1 diff kit
 
The wait is almost over, got the best price and service on the manual ZL1 kit a few more days and I will get the swap done. Shout out to Hendrick Chevrolet for getting this done quick :happy0180:

bct10985 03-31-2015 06:59 PM
My zl1 diff just arrived today. Im piecing it together though didnt get the kit.

MA2010SS 03-31-2015 07:10 PM
Quote:
Originally Posted by bct10985 (Post 8331447)
My zl1 diff just arrived today. Im piecing it together though didnt get the kit.
either way these are stout units...can't wait to install and not worry about the drivetrain anymore for the most part

H-E 03-31-2015 08:17 PM
The diff's not bad,can't say anything good about the stock 2pc driveshaft or the stock axles......Just so you guys know we have a kit that uses the zl1 diff and our axles and high performance 1 PC drive shaft for close to the same price.

Johnnyrod 04-01-2015 11:43 PM
H-E pm me pricing of the kit your talking about, looking to make that upgrade in the futur.

Driveshaftshop 04-02-2015 09:40 AM
After we made the ZL1 axles for H-E i was actually surprised to have so many people contact us about breaking the stock ZL1 axles, We have them DSS style is you have an issue

MA2010SS 04-02-2015 03:09 PM
Should be fine with the stock ZL1 axles as long as the car is not lowered...wheel hop is what will destroy those things

H-E 04-02-2015 04:29 PM
Quote:
Originally Posted by MA2010SS (Post 8336063)
Should be fine with the stock ZL1 axles as long as the car is not lowered...wheel hop is what will destroy those things
Your EXACTLY right,lowering a car tremendously lowers its power holding.That's why we finally released our new diff bushings that raise the diff,effectively un lowering your car if you will.Our new diff bushing are a must IMO for any 5th gen weather it has aftermarket axles or especially stock.

fif_gen_powa 04-02-2015 05:06 PM
Quote:
Originally Posted by H-E (Post 8336220)
Your EXACTLY right,lowering a car tremendously lowers its power holding.That's why we finally released our new diff bushings that raise the diff,effectively un lowering your car if you will.Our new diff bushing are a must IMO for any 5th gen weather it has aftermarket axles or especially stock.
When will these be available, I didn't see them on the site

nyny69 04-02-2015 05:29 PM
Quote:
Originally Posted by H-E (Post 8331614)
The diff's not bad,can't say anything good about the stock 2pc driveshaft or the stock axles......Just so you guys know we have a kit that uses the zl1 diff and our axles and high performance 1 PC drive shaft for close to the same price.
And if we already have the Dss axles and 1pc DS. Can they be altered to fit the zl1 diff?

I assume the axles are easy. just need different stubs. The 1pc would probably have to go back to Frank

H-E 04-02-2015 06:03 PM
Quote:
Originally Posted by jdubzzz44 (Post 8336298)
When will these be available, I didn't see them on the site
We have a few sets left in delrin ,the softer version should be ready in about 30 days.If you want to grab one of the last sets give me a call.

H-E 04-02-2015 06:06 PM
Quote:
Originally Posted by nyny69 (Post 8336348)
And if we already have the Dss axles and 1pc DS. Can they be altered to fit the zl1 diff?

I assume the axles are easy. just need different stubs. The 1pc would probably have to go back to Frank
Well the axles could but it would cost more than selling what you have and buying new.The only thing used would be the CV and the outer.I'll be glad to help you make the switch just give me a call....also know where a few low mile zl1 diff's are for $1200

nyny69 04-02-2015 06:36 PM
Quote:
Originally Posted by H-E (Post 8336433)
Well the axles could but it would cost more than selling what you have and buying new.The only thing used would be the CV and the outer.I'll be glad to help you make the switch just give me a call....also know where a few low mile zl1 diff's are for $1200
Thanks. I will have to give you a call for more details

H-E 04-02-2015 07:08 PM
Quote:
Originally Posted by nyny69 (Post 8336502)
Thanks. I will have to give you a call for more details
Sounds good call anytime I'll be out late at the track tonight if you want to call


All times are GMT -5. The time now is 01:05 PM.
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.