Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   USA - California (https://www.camaro5.com/forums/forumdisplay.php?f=14)
-   -   Wrapped my Camaro in the New 3m Stainless Brushed Black Metallic (https://www.camaro5.com/forums/showthread.php?t=247710)

gotpball44 09-01-2012 08:39 PM

Wrapped my Camaro in the New 3m Stainless Brushed Black Metallic
 
Hey Guys,
Just wanted to show you guys my latest mods. Just wrapped my Camaro in the new 3m Stainless Brushed Black Metallic by Rolotech Car Wraps. Its a pretty sweet wrap because from far it looks satin black, then when you get up close you see the brushed black and metallic. Its a very hard wrap to install i heard tho. Cause the camaro requires a lot of stretching around he rear shoulder area. But it looks awesome in person and something different. Took a big risk because havent seen a full car wrapped in this material yet. Great thing is, it protects my paint and don't have to worry about swirl marks in my black paint lol. I left all the carbon fiber parts exposed on the car. (Parts of carbon front bumper, carbon hood, carbon roof, carbon trunk and carbon wing.) Hope you guys like it, the pictures just dont do justice.

http://i193.photobucket.com/albums/z...4/IMG_2642.jpg
http://i193.photobucket.com/albums/z...61580899_o.jpg
http://i193.photobucket.com/albums/z...4/IMAG1341.jpg
http://i193.photobucket.com/albums/z...4/IMAG1342.jpg
http://i193.photobucket.com/albums/z...4/IMAG1343.jpg

Roof is a little dirty with it being windy and someone just mowed their grass :( lol
http://i193.photobucket.com/albums/z...4/IMAG1344.jpg

Russo 09-01-2012 08:47 PM

the wrap job looks great! i don't know about the way you put the aftermarket items together... the grills on the bumper dont match the grill between the headlights.. the hood is a bit extreme.. i would get a factory CF hood, heritage grill, and wrap the front bumper except for the lower chin spoiler.. that way everything flows..

gotpball44 09-01-2012 09:00 PM

Quote:

Originally Posted by Russo (Post 5522908)
the wrap job looks great! i don't know about the way you put the aftermarket items together... the grills on the bumper dont match the grill between the headlights.. the hood is a bit extreme.. i would get a factory CF hood, heritage grill, and wrap the front bumper except for the lower chin spoiler.. that way everything flows..

Well, they are all in the works. The grille i cant do much because thats what it comes with the aggressor front end for now. The grille next to the headlight will be changed to at some time. I just like how u can see the front mount through it tho.

As for the hood, that will be changed soon too. Maybe right before or right after SEMA. But that hood is not even that crazy. I seen some extreme hoods on the forums lol. Its just like a OEM hood with a lil raise and small scoops in the middle. Its from Seibon and they wanted to promote it on my car a while back.

The lip is connected to the front bumper. If you see it in person, it flows much better than what is photographed.

gotpball44 09-01-2012 09:01 PM

O and still missing the carbon fiber side-skirt add ons that i need to get installed.

03Amputee 09-01-2012 09:40 PM

Looks sick man! Where did you get that done? How much?

khislop007 09-01-2012 09:54 PM

That looks sick!:thumbsup:

2010 SSRS 09-01-2012 09:58 PM

definitely looks awesome

Buffnshine 09-01-2012 11:31 PM

Amazing as always

LIM3 09-01-2012 11:33 PM

very nice

AC 09-01-2012 11:42 PM

looks good.

Moreno Motorsports 09-02-2012 01:25 AM

Very nice :headbang:

caper 09-02-2012 01:39 AM

nice for sure!

GunnyG 09-02-2012 01:58 AM

Whoa Damn! Awesome job gotpball44, enjoy! :thumbsup:

gotpball44 09-02-2012 03:58 AM

Quote:

Originally Posted by 03Amputee (Post 5523142)
Looks sick man! Where did you get that done? How much?

Rolotech in Anaheim, pricing depends on wrap material. This material cost as much as the 3m carbon fiber wrap. So its not cheap stuff. We worked something out.

Quote:

Originally Posted by khislop007 (Post 5523182)
That looks sick!:thumbsup:

Quote:

Originally Posted by 2010 SSRS (Post 5523201)
definitely looks awesome

Quote:

Originally Posted by Buffnshine (Post 5523518)
Amazing as always

Quote:

Originally Posted by LIM3 (Post 5523521)
very nice

Quote:

Originally Posted by AC (Post 5523556)
looks good.

Quote:

Originally Posted by Nathan Moreno (Post 5523808)
Very nice :headbang:

Quote:

Originally Posted by caper (Post 5523829)
nice for sure!

Quote:

Originally Posted by GunnyG (Post 5523854)
Whoa Damn! Awesome job gotpball44, enjoy! :thumbsup:

THANK YOU ALL FOR THE NICE WORDS. In person on some sections the car requires some stretching, especially around the shoulder areas, you can see some little stretch marks, but its only noticeable at the right angels and light. If you get wrapped somewhere with this material or any stainless brushed material, make sure they have someone experience cause its a very hard material to wrap. Rolotech car wraps are top notch guys.


All times are GMT -5. The time now is 03:29 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.