What spark plug wires and spark plugs should I use
 

Just did a cam swap and ported heads on my motor what spark plugs and wires do you Guys recommend ? ?? Havnt hard time to deciding

I’ve had good luck with Moroso Ultra 40 wires. They are low resistance but still have all of the noise reduction needed and can withstand high temperatures.

Doug

To clarify, this is for a Z28? Your user cp says ZL1. My recommendation will change based on what car this is for.

2015 z28

I'm really happy with the NKGs - its the part # listed on their website. When I get home from my work trip I'll check the box and post for you.

Thank you please let me know

These wires are great and hold up well being taken on/off
http://www.mtiracing.com/mti-racing-...lug-wires.html

E3 Diamond Fire and MSD Coils and Wires.

NGK TR6 or TR7 plugs and MSD 8.5mm super conductor wires.

I've witnessed numerous issues across multiple vehicle platforms, that have resulted from using multi-electrode plugs. They're snake oil at best

Stick with the classic single electrode design

They couldnt pay me to run those E3 plugs. 6+ years in aftermarket have proven those to be junk plugs. Same goes for the Bosch quad plugs.

What's wrong with stock plug wires? A lot of guys use them on way more extreme builds with no problems.

Taylor Race Wires with stock plugs. Cool socks protect from header heat.

I been through them all. No need to change plugs unless you are boosted. Keep your stock wires and stock plugs, you will be fine