DIY: Interior dash trim and door panel / door trim removal instructions
 

Here are instructions for the removal of the interior dashboard trim / dash trim / door trim / door panel



Attachment 92915

Attachment 92916

Attachment 92917

Attachment 92918

Attachment 92919

Attachment 92920

Attachment 92921

Attachment 92922

Attachment 92912

Attachment 92913

Attachment 92914

WOW! Great instructions! Thanks.

Bookmarked! Thanks!

ditto

These are the instructions included in the kit. I just installed the yellow ones last weekend and they are decent instructions, but as i popped the door panels from the door, a few of the clips actually broke so you may want to purchase a couple to replace any that break. the trim that extends across the dash was a bit tricky, couple of the clips gave a good fight. total job took about an hour and half. Really dresses up the interior. Heres a picture of it after installing.

Anyway you can get a clearer shot of view A B C D

When I took my doors off, I wound up not unplugging most of everything because I was having a heck of a time trying to figure out how to unplug the items. Since what I was doing was changing my ambient lighting to red, I didn't need to, but maybe that would help someone out.

Thanks! very helpful

man that yellow looks great !!!!

Now this is what I'm talkin about..Great job:thumbsup:

Could you scan these instructions and put them back on. When I printed the instructions they came out very dark like they were burn't.
This is great info.
Thanks

Thanks so much for this thread.

OK so I did my door mod today and they came out great. the only problem is they dont exactly line up with my ABL dash. Has anyone had this problem and if so, how did you fix it?

I am getting a set of original door inserts from someone on here, so they dont come with the screws. Does anyone have more info on the screws? The instructions just say 8mm screws. What is the screw length, width, thread pitch?