My ZL1 with CCW SP16a wheels and MPSS Tires
 

Tire setup = 295/35/20 F / 315/35/20 R


CCW front wheel and tire weight
Attachment 513971

OEM Front black 10 spokes wheel and tire weight
Attachment 513972

CCW Rear wheel and tire weight
Attachment 513973

OEM rear black 10 spokes wheel and tire weight
Attachment 513974

Attachment 513975

Attachment 513976

Attachment 513977

Attachment 513978

Attachment 513979

Attachment 513980

Did not have to move ebrake cable. I had plenty of clearance.
Attachment 513981

Looks good!


2010 Camaro SS/RS LS3
---------—------------------
Built by Vengeance Racing
Pro Line 416 Stroker
500RWHP/508RWTQ

Thanks :smoking:

Nice and saved some weight too!

How do you like the tires? Any noticeable difference? Looks good by the way.

Sweet!!!

Love the tires...

Things I've noticed...
A lot less road noise
Little softer ride ( due to the bigger tires )
Looks way better
Haven't took any sharp turns or punched it at a dead stop yet. ( 500 miles to go )

So far, I couldn't be happier with my set up.

Every pound counts. Lol

Have you had any issues with rubbing? I tried to get the same setup installed, and the tire shop refused, because they said the tires were too big. It seems like a few people have been running the 315 in the rear, but you're tw first I've seen with a 295 up front. Plus they don't seem to have the mpss in 305 right?

Correct. There is no 305/35 in the MPSS.... I have no fitment issues with the 295/35 F and 315/35 R

I've experienced zero rubbing issues within about 400 miles so far.

My advice is find a new tire shop. Lol. Show them this thread! Then ask them their opinion... This will surely show your local tire guy that he is an idiot and doesn't know what he's talking about.