Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   Member Car Journals (
-   -   My 2010 1SS M6 (

Bo White 11-10-2013 03:16 PM

My 2010 1SS M6
3 Attachment(s)
I bought the car from a member here about 6 weeks ago. Car already had good parts on it like LTs and an ECS 1500 Paxton blower setup so it had potential. I just want to jot some stuff down as I go with this thing. Some updated pix, it still looks the same as it did except I raised it up a couple of inches and put LS3 badging on the side:

the rich dude 11-10-2013 04:04 PM

u raised it a couple inches???? how low was it?

aquablueL99 11-10-2013 04:32 PM

Looks awesome....White is so cool..

Kurt ABL99...:chevy:

Bo White 11-10-2013 05:29 PM

1 Attachment(s)

Originally Posted by the rich dude (Post 7174183)
u raised it a couple inches???? how low was it?

It was on the F'n ground.

Bo White 11-10-2013 05:47 PM

3 Attachment(s)
Since I've bought it I put a lot of BMR stuff in the rear, lightened the tint and put a remote clutch fluid rezzy on.

Bo White 11-10-2013 05:50 PM

3 Attachment(s)
Since it had OBX headers on it I bought the catback and redyno tune:

LS3 SS 11-10-2013 06:15 PM

I love this car. Love all the mods as well. Can you give me a quick breakdown on all of your suspension mods? I'm done with power, and now I'm gonna start doing my suspension. So far I have BMR front rear sway bars, BMR trailing arms with outer bushings, and lowering springs.

Bo White 11-10-2013 06:32 PM

Cradle full bushings, trailing arms and bushings, tie rod links and upper control arm bushings.

2010 SSRS 11-10-2013 11:45 PM

really nice looking Camaro you have

midnighter 11-10-2013 11:53 PM

Awesome ride!

the rich dude 11-11-2013 12:23 AM

I'm assuming it has coil overs? Did the guy drive around at that ride height? Love the stance!!!! LoL

Bo White 11-11-2013 02:06 AM

Yeah it was drove around like that. Thanks for the complements. And yes, KW coil overs.

Bo White 12-30-2013 09:00 AM

So far this is whats done to it:


Custom paint
Wrapped roof
Rear Aero Sport Concepts wickerbill
Heritage Front Grille
LED fog lights
ZL1 style front splitter
Painted Tail light Bezels
Tinted side markers
35% tint windows
Lamborghini Orange Brake Calipers
ZL1 Side Skirts
Race Star Dark Stars 17x4.5 front MT 28x6 radials
Race Star Dark Stars 17x10.5 rear Hoosier 28/10.5
Race Star Dark Stars 18x10.5 rear Nitto 295/45 G2s for daily use


B&M Pro Ratchet Shifter
SLP guage pod
Aeroforce Interceptor Gauge
Metra Dash Kit
Pioneer AVH-4500BT Head Unit
ALL speakers have been replaced with Precision Power speakers
Precision Power 5 channel amp
10" Precision Power subwoofer with custom box for the Camaro


BMR Rear Trailing Arms
BMR Rear Trailing Arm Bushings
BMR Toe Rods
BMR Full Cradle Bushings
BMR Upper Control Arm Bushings
BMR engine mounts


LPE Twin Fuel Pumps
FIC 72lb injectors
Powerbond underdrive pulley
TSP custom 243/255 camshaft
PRC 13* 260cc cylinder heads milled .035"
Eagle #12946 416ci rotating assembly
Clevite H bearings
ARP 2000 rod bolts
ARP main studs
ARP head bolts
ARP cam bolts
ARP flexplate bolts
Mast stroker windage tray
Rings gapped .024/.020
12.6:1 compression
Powell trunion bushings
Melling 10295 pump with COPO spring
Two Elite Engineering catch cans
ZR1 MAP Sensor
TR7 plugs
TSP 2" Cerakoted Long Tube Headers
OBX Catback
Edelbrock Pro Flo XT LS3 manifold(ported for 102mm TB)
Edelbrock billet fuel rails
102mm Throttle body
5" custom cold air intake
Holley Aluminum LS Valve Covers (Black Crinkle Finish)
TCI flexplate
PTC 8" 5500 stall
Motive 4.10 gears
LPW Diff cover
HPTuners Gen3Performance and Dyno

Chris-10 12-30-2013 08:21 PM

That looks like gl2filmerguy's ride. Badazz car!!!

All times are GMT -5. The time now is 07:11 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2022, vBulletin Solutions, Inc.