Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   1000WHP+ GT5594 + POWERGLIDE + E85 (https://www.camaro5.com/forums/showthread.php?t=418180)

Tajefe Couple 11-21-2019 09:22 PM

Street racing channel, sponsor, be seeing you on Street Outlaws next:bow:
Can't wait to see what you put together for next season:respekt:

Neumatic 11-22-2019 08:38 AM

Quote:

Originally Posted by ttshovel (Post 10665277)
I've made the decision to sell my current turbo setup to start over. Will be keeping the turbo and mounting it up front and center. A local shop, just starting out, is cutting me a deal. I pay for materials and put their sticker in the back window and they will build the kit for free. No brainer there

Blacksheep? I was thinking about talking to him about doing the cage in my car. I donít know him personally but I have a few mutual friends.

ttshovel 11-22-2019 09:25 AM

Quote:

Originally Posted by Neumatic (Post 10665551)
Blacksheep? I was thinking about talking to him about doing the cage in my car. I donít know him personally but I have a few mutual friends.

Yes sir! Andrew is giving me the hookup and I'm gonna help promote him.

ttshovel 11-22-2019 06:57 PM

1 Attachment(s)
Posted the turbo setup up for sale on fb. Sold in less than 2 hours for full asking price. Guess I priced it reasonably enough lol. Ben from gpi ended up buying it. Cant wait to see how far he pushes it!

Bought the cable fuel pump drive pulley setup, vacuum pump kit, and low mount alternator setup from robert ette at aei cnc. He specd me a 13.2gpm enderle pump for my switch to methanol.

Pic of said drive kit

WEISHAAR37 11-26-2019 09:25 AM

Price was very reasonable and saved me a bunch of hours of welding lmao. and bet im going to push it as hard as it will go! thanks again Bud.

Ben

ttshovel 11-26-2019 09:52 AM

Quote:

Originally Posted by WEISHAAR37 (Post 10668067)
Price was very reasonable and saved me a bunch of hours of welding lmao. and bet im going to push it as hard as it will go! thanks again Bud.

Ben

Glad I could help you out brother! I know you'll get it into the 7s! I know the kit has it in it 🤘

ttshovel 11-26-2019 04:13 PM

5 Attachment(s)
Got the firewall cut enough to get the motor in. Will have to go back and cut more out after I make the mounts for the front/midplate.

Who would've thought it would free up that much space. I will be converting to manual steering as well. Cant wait to get this thing finished up and back on the scales!

Tajefe Couple 11-26-2019 07:43 PM

Your build is getting insane!:bow:

ttshovel 11-27-2019 02:24 PM

2 Attachment(s)
Got the trans tunnel cut for the mid plate. Just have to weld the brackets for both plates in. From there I can get the trans back in and make a new mount for that and have the driveshaft shortened

Ordered a set of the flowtech turbo headers. 1 and 7/8 primary, 3" collector. Part number 11537FLT. Going to install those before welding the brackets for the plates in to make sure I have the room for them

ttshovel 11-29-2019 01:37 PM

8 Attachment(s)
Headers fit with plenty of clearance around everything. Egt bungs and maven turbo mounts came in as well. Next up welding the brackets for the motor plates in

ttshovel 12-04-2019 08:11 PM

4 Attachment(s)
Got the midplate and front plate brackets welded in.

Got the trans bolted up. Super shocked it fit without any more cutting! showing a negative 3 degree drivetrain angle which is around what I was shooting for.

Will make a trans mount and measure for driveshaft tomorrow. Hoping to start forming the firewall next week

ttshovel 12-05-2019 01:27 PM

2 Attachment(s)
Turbo tacked in place using the new maven mount. Made life 100% easier mounting it

Jayjellyfish212 12-05-2019 04:55 PM

Dang that’s a lot of progress! Nice work!

Tajefe Couple 12-05-2019 07:03 PM

Looking wicked:thumb:
Liking that turbo placement


All times are GMT -5. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.