Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   1000WHP+ GT5594 + POWERGLIDE + E85 (https://www.camaro5.com/forums/showthread.php?t=418180)

ttshovel 12-05-2019 10:03 PM

Quote:

Originally Posted by Jayjellyfish212 (Post 10674372)
Dang thatís a lot of progress! Nice work!

Quote:

Originally Posted by Tajefe Couple (Post 10674454)
Looking wicked:thumb:
Liking that turbo placement

Thanks guys. The fab shop stopped out and we made a list of all the materials needed to make it happen. Hoping to have all that stuff, along with everything else lined out after the holidays and back on the dyno around March

ttshovel 12-19-2019 06:31 PM

3 Attachment(s)
Wedding is all done. She got me a badass ring :thumbup:

Cut motor plate apart for accessories. Will be purchasing the rest of it very shortly

Tajefe Couple 12-19-2019 06:59 PM

Congratulations and cool ring!

tstodii 12-20-2019 09:24 AM

That's awesome, the car and the ring. I'll have to drop a hint to my S.O. and see if she can find something similar for out wedding next Oct.

Excited to see this car run again. It has been a beast so far. Good luck.

Cheers!

ttshovel 12-20-2019 09:56 AM

Quote:

Originally Posted by Tajefe Couple (Post 10683043)
Congratulations and cool ring!

Quote:

Originally Posted by tstodii (Post 10683356)
That's awesome, the car and the ring. I'll have to drop a hint to my S.O. and see if she can find something similar for out wedding next Oct.

Excited to see this car run again. It has been a beast so far. Good luck.

Cheers!

Thanks guys! The ring came from titanium buzz. They have a bunch of car related ones.

I'm looking forward to it as well! Cant wait to hear it with a legit piping

ttshovel 12-22-2019 05:11 PM

4 Attachment(s)
Pulled the factory power rack and brake booster. Going to go with a reverse swing pedal to get plug access on the driver side. Will post up part numbers as I get parts

ttshovel 12-24-2019 03:11 PM

1 Attachment(s)
Vacuum pump mounted.

ttshovel 12-28-2019 03:05 PM

4 Attachment(s)
More pieces of the puzzle. Going to block off the water pump ports on the block and weld bungs into the front/back of the heads to prepare for a dry deck motor. The ls2 block will be 100% solid filled to the top of deck, hoping that keeps it from cracking a liner under what I'm gonna put it through.

ttshovel 12-30-2019 04:05 PM

3 Attachment(s)
Got the fittings all welded in today. Have to cut up the motor plate a bit more to get it to fit, then from there water pump, radiator, and coolant line plumbing

Jayjellyfish212 12-30-2019 06:51 PM

:happy0180:

Amazing!

:pop2:

ttshovel 01-01-2020 04:58 AM

3 Attachment(s)
Last piece of the front accessories. Will have front finished this weekend. Hoping its the last time the front motor plate goes on

Homebuilt Hotrods 01-04-2020 12:41 PM

Such an awesome build! It inspired me to go ahead with my back half build on my 2010 camaro. This is my first post, but if its not too much trouble will you fill me in on your rear axle specs? Like bare housing length, wheel size/back space etc? I have the same 4 link back half on order. i have 31x16.5x15s

ttshovel 01-04-2020 01:53 PM

Quote:

Originally Posted by Homebuilt Hotrods (Post 10692715)
Such an awesome build! It inspired me to go ahead with my back half build on my 2010 camaro. This is my first post, but if its not too much trouble will you fill me in on your rear axle specs? Like bare housing length, wheel size/back space etc? I have the same 4 link back half on order. i have 31x16.5x15s

Absolutely man!

The axle housing bare is 37", axle to axle 42", backspace is 4" on a 15x14. To fit that size tire I'd probably go will a 2-3" backspace.

Homebuilt Hotrods 01-04-2020 05:03 PM

Quote:

Originally Posted by ttshovel (Post 10692756)
Absolutely man!

The axle housing bare is 37", axle to axle 42", backspace is 4" on a 15x14. To fit that size tire I'd probably go will a 2-3" backspace.

Thank you so much I really appreciate the help and will be following closely with your build.
Josiah


All times are GMT -5. The time now is 02:39 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.