Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro 1LE Forum (https://www.camaro5.com/forums/forumdisplay.php?f=149)
-   -   1LE Factory Tire Pressure (https://www.camaro5.com/forums/showthread.php?t=287813)

Nick S 04-07-2013 07:06 PM

1LE Factory Tire Pressure
 
I was wondering if any of the 1LE owners would be able to look on the info tag inside their drivers door to see what the factory tire pressure recommendations are for the front and rear.

Thanks in advance!

tbirdsleeve 04-07-2013 07:10 PM

32 PSI

cornerspeed92 04-07-2013 07:21 PM

confirmed!

SUKXOST 04-07-2013 07:26 PM

so the 23lbs I dropped them to @ the drag strip that tripped the warning to add air wasnt right?


:sm0:

Cooley 04-07-2013 07:31 PM

Quote:

Originally Posted by SUKXOST (Post 6395430)
so the 23lbs I dropped them to @ the drag strip that tripped the warning to add air wasnt right?


:sm0:

:faint:

cornerspeed92 04-07-2013 07:33 PM

then that means the 29 i ran at Laguna wasn't right too :)

SUKXOST 04-07-2013 07:38 PM

Quote:

Originally Posted by cornerspeed92 (Post 6395475)
then that means the 29 i ran at Laguna wasn't right too :)

Course vs strip but....

If I remember right:
I took a pass @ 29 lbs and went 12.4 (2.1 60' @ 125)

Dropped to 24lbs and went 11.71 (1.87 60' @ 123)

Dropped to 23lbs and went 11.67 (1.83 60' @ 123)

Nick S 04-07-2013 07:42 PM

Thanks for the replies everyone!

cornerspeed92 04-07-2013 08:22 PM

Quote:

Originally Posted by SUKXOST (Post 6395502)
Course vs strip but....

If I remember right:
I took a pass @ 29 lbs and went 12.4 (2.1 60' @ 125)

Dropped to 24lbs and went 11.71 (1.87 60' @ 123)

Dropped to 23lbs and went 11.67 (1.83 60' @ 123)

Thats amazing that such little gains/losses in pressure make such a difference,nice pass :)

Tara Martin 04-08-2013 03:19 AM

OMG, my 1LE was delivered to me with 44 psi in each corner. It felt like I was driving on bowling balls until I lowered them. I'm not sure if the factory or the dealer did it. Did everyone else's come with "Nitrofilled" from the factory or was this a dealer addon for my car? It came with the white-logo-ed valve caps that look horrid on the black wheels.

Tara

Dropspeed 04-08-2013 10:49 AM

Quote:

Originally Posted by cornerspeed92 (Post 6395748)
Thats amazing that such little gains/losses in pressure make such a difference,nice pass :)

That could be driver improvement as he got use to the track condition, he varied the launch RPMs or the track was improving. Typically a 35 series DOT track (road race) tire is not effective at a drag strip because the sidewall is so stiff it doesn't allow for weight transfer. I am actually suprised that the 60fts are that good on the stock tire! Nice driving!

-Matt

gajagfan 04-08-2013 10:59 AM

Quote:

Originally Posted by Dropspeed (Post 6397903)
That could be driver improvement as he got use to the track condition, he varied the launch RPMs or the track was improving. Typically a 35 series DOT track (road race) tire is not effective at a drag strip because the sidewall is so stiff it doesn't allow for weight transfer. I am actually suprised that the 60fts are that good on the stock tire! Nice driving!

-Matt

I agree. With wrinkle wall slicks, pressure is a huge deal, but these new tires I would not have thought were as responsive to pressure changes. It would be interesting to note any other changes like launch RPM and / or weather conditions.

Nick S 04-08-2013 08:49 PM

With lower tire pressure though on the good years you may not get sidewall wrinkle but you will effectively increase your contact patch area which will give you more traction. With less pressure the flat spot on the bottom will become bigger thus give you more grip.
Obviously the tire is not really intended for drag racing with the low sidewall but lowering the pressure can still help a bit.
I'm sure with SUKXOST though he did improve his driving as he warmed up to the track.

Firefighter 04-08-2013 08:54 PM

Quote:

Originally Posted by Tara Martin (Post 6397069)
OMG, my 1LE was delivered to me with 44 psi in each corner. It felt like I was driving on bowling balls until I lowered them. I'm not sure if the factory or the dealer did it. Did everyone else's come with "Nitrofilled" from the factory or was this a dealer addon for my car? It came with the white-logo-ed valve caps that look horrid on the black wheels.

Tara


Mine came in at 38 psi and I dropped it down to 32 psi I'm thinking of going with 30 psi. No Nitrofill either.


All times are GMT -5. The time now is 07:52 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.