Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Audio / Visual / Electronics/ Gauges / Nav (https://www.camaro5.com/forums/forumdisplay.php?f=79)
-   -   Finally!!! Camaro Window Valet is now available from SCP! (https://www.camaro5.com/forums/showthread.php?t=417297)

southerncarparts 07-24-2015 04:52 PM

Finally!!! Camaro Window Valet is now available from SCP!
 
Camaro Window Valet

http://www.southerncarparts.com/images/WVC7-200.png

The Window Valet™ for Camaro provides remote power window control for the 2010-2014 Camaro

Installation for the Camaro is just like it was for the Corvette. It just plugs into the diagnostics port. No wires, no cutting, no tools.

Once installed, the Window Valet™ for Camaro is ready to run. There's no configuration required. And, as always, Window Valet's do NOT reprogram the car's computers.

More information, installation instructions, and ordering info right here: Camaro Window Valet

13Conv2SSRS 08-30-2015 08:32 PM

Quote:

Originally Posted by southerncarparts (Post 8603103)
Thanks for considering Southern Car Parts!

Please check your PMs for a question. Thanks!

13Conv2SSRS 09-11-2015 09:28 PM

I bought a Window Valet for my 13 convertible.

Everyone considering this unit should know that it doesn't quite work as you would expect on a convertible. I assume it works entirely correctly on a coupe.

The Valet works fine with the top up. The front windows will roll down and up, and vent. With the top down, the roll-down feature works, but not the roll-up. This is because of a GM feature/issue, but the Valet does not override this.

End result, the roll-up feature does not work when the top is down.

The convertible has 4 windows instead of the 2 on a coupe. Stock, with the rear windows down the express-up of the front windows is disabled. You have to roll up the rear windows before the express-up on the front windows will work. Since the Valet does not control the rear windows, it cannot raise the front windows when the top is down and the rear windows are down, which happens by default when you lower the top.

This is something that I'm sure a design change could address, and would result in a separate unit for convertibles. I hope Top Down Tech chooses to address this issue soon. But as it is now, be prepared for the roll-up to fail when the top is down.

southerncarparts 11-17-2015 09:02 AM

Thanks for considering Southern Car Parts!

southerncarparts 11-25-2015 10:48 AM

:thumbsup:

TwentyTen2SSRS 12-12-2015 01:27 PM

Hmm interesting


Sent from my iPhone using Tapatalk

ghosted 12-26-2015 03:01 AM

So let's say I use an OBD II splitter so that I can keep my bluetooth scanner plugged in, will the Window Valet work on the second leg of the connector? :)

davesnever 04-04-2016 04:23 PM

Quote:

Originally Posted by ghosted (Post 8806247)
So let's say I use an OBD II splitter so that I can keep my bluetooth scanner plugged in, will the Window Valet work on the second leg of the connector? :)

Excellent question I have been wondering about also, I already have my programmable shift light plugged in there.Not to mention I was also interested in the Range active fuel management disabler. Do they make OBD II extension strips lol?

southerncarparts 06-14-2019 07:28 AM

Camaro Window Valet

http://www.southerncarparts.com/images/WVC7-200.png

The Window Valet™ for Camaro provides remote power window control for the 2010-2014 Camaro

Installation for the Camaro is just like it was for the Corvette. It just plugs into the diagnostics port. No wires, no cutting, no tools.

Once installed, the Window Valet™ for Camaro is ready to run. There's no configuration required. And, as always, Window Valet's do NOT reprogram the car's computers.

More information, installation instructions, and ordering info right here: Camaro Window Valet

southerncarparts 12-30-2019 09:08 AM

Thank you for the orders!

southerncarparts 01-12-2021 10:59 AM

:drive: Get yours today :rolling5thgen:


All times are GMT -5. The time now is 07:20 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.