Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

- Local Marketplace (https://www.camaro5.com/forums/forumdisplay.php?f=119)

- - Track Parts/Stock Parts for Sale (https://www.camaro5.com/forums/showthread.php?t=515534)

Track Parts/Stock Parts for Sale

Hi All,
I have recently sold my 2013 Camaro SS 2SS RS, and I have some parts for sale. I’ll put pictures in the second post, let me know if you have any questions on the items. All prices are OBO, shoot me an offer. For now the prices don't include shipping. Parts are in Auburn, WA 98092.

Engine
Cold Air Inductions Polished Silver intake with race scoop and small washer bottle - SOLD
Kook’s Ceramic Coated 1-7/8” Headers with Kook’s High Flow Cats and O2 Extensions - SOLD
MSD Red Spark Plug Wires (used for about 200 miles) - SOLD
Elite Engineering Dirty Side Catch Can - SOLD
SCT X4 Tuner (purchased from Dynosteve, it has been married to only my vehicle, per Dynosteve it can be unlocked and used, no problem) - $180 shipped
DeWitt Radiator DEW-1139009A (2x thicker than stock, brand new in box) (2012-2015) - SOLD
AEM UEGO Wideband (comes with Bosch O2 sensor) – SOLD
Vitesse Throttle Controller TC-CAM19A - SOLD
Coil Pack Brackets (new) (to clean up underhood) (one is miscut, but barely) - SOLD

Suspension-Wheels
Full Z28 DSSV Multimatic Shocks (7 track days on them) - SOLD
Full Z28 DSSV Multimatic Shocks (Brand New) - SOLD
Pegasus Camber Plates (easily got -2.7 in front) - SOLD
4 Apex Anthracite Arc-8 Rotary Forged 19x10.5 ET22 wheels with 305/30R19 Z28 Pirelli Trofeo R Tires (wheels in perfect condition, with TPMS. No fitment issues whatsoever) - SOLD

Brakes
StopTech Red ST60 6 Piston 15” BBK with 380x32mm slotted-vented rotors w/stock Stoptech Pads (83.193.6800.71) and Goodridge Stainless brake lines (may need new rotors rings soon) - SOLD
Raybestos ST47 Brake pads for ST60 (3 track days on pads) - $200
Raybestos ST47 Brake Pads for SS Front Calipers ST47R1001.15 (1 track day on pads) - $200
Raybestos ST47 Brake Pads for SS Front Calipers ST47R1001.15 (bought used, decent life left) - $130
Raybestos ST45 Brake Pads for SS Rear Calipers ST45R592.15 (brand new) - $140
OEM Brembo Rear Brake Pads (3 sets for the price of 2) – $60
Brake Duct Mounts (to spindle, for brake ducting) - SOLD

Interior
Harness Bar + Tank Plates (all mounting parts included, no cutting or drilling required, has eyelets for harness) - SOLD
OEM SS 1LE Driver’s Recaro Seat (part 23478426). Not manufactured anymore, huge upgrade vs stock seat, in really good condition, 6 way power + heat - $1,500
OEM SS 1LE Alcantara Steering Wheel (for 2010-11, need to change to 2012+ style airbag) - SOLD
Sullivan Aluminum Pedal Covers (increases width on throttle for easier heel+toe) - SOLD
OEM Shifter Assembly - $50
Bracketeer Fire Extinguisher Mount (no drilling required, no extinguisher included) - SOLD
SLP Steering Column Gauge Pod - SOLD

Miscellaneous
Gen5DIY Always-on Halo Harness (for 2010-2013 RS, 2012-2015 ZL1) - $50
JDP Red Front Tow Hook (brand new) - SOLD
Driveshaft Tunnel Brace (forum member made them) - SOLD
Magnaflow X-pipe Muffler (new) (part 11386) - SOLD

how much shipped for the following items:

MSD Red Spark Plug Wires (used for about 200 miles) - $60
Sullivan Aluminum Pedal Covers (increases width on throttle for easier heel+toe) - $100

Shipping to Brandywine Maryland 20613.
Thanks

Do you have any pictures of the the harness bar and tank plates installed? Who made them?

Just a note for everyone else I was interested in the radiator but it does not fit 10-11 according to their site.

Quote:

Originally Posted by svenh44 (Post 10001418)

I'll send you a PM in a few minutes

Quote:

Originally Posted by R3VoLuTioN (Post 10001436)

You're correct on the radiator (I updated the post), I had that in one of my other lists but forgot to put that here

Let me see if I can find an installed picture. I bought the bar/plates from x25 here, I forget who made them, I'll ask him. Group buy or something? They are super heavy duty and worked perfectly, heavy duty heim joints everywhere and very adjustable. I added a bunch more harness bar pictures. I just heard from x25, he said it was fabricated by a guy at Boeing after the BK bar, but with heavier duty/higher quality joints. It's very well made, for sure

PMed about the wing.

PM's replied, bump :)

Quote:

Originally Posted by R3VoLuTioN (Post 10001436)

I haven't forgotten about this, I had to buy more packing material today to pack it up, I should be back to you today about this

Quote:

Originally Posted by clarkkent (Post 10004274)

I haven't forgotten about this, I had to buy more packing material today to pack it up, I should be back to you today about this

Okay no rush. There is snow on the ground here and no engine in my car at the moment hah

How much for the driver and passenger tank plates only shipped to 29511? Please pm if possible.

Drive Shaft tunnel brace

I would like the Tunnel Brace please, missed out on those when he had the tread going.

Quote:

Originally Posted by Amistad2011 (Post 10009618)

I would like the Tunnel Brace please, missed out on those when he had the tread going.

PM sent

Sorry for the delays everyone, holidays have been busy, but I'll get back to everyone shortly

i'd definately be interested in those headers,how does 850.00 sound .? lmk.pavlos1