Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro ZL1 Forum - ZL1 Specific Topics (https://www.camaro5.com/forums/forumdisplay.php?f=85)
-   -   Damage Prevention Help....Wheelchair at fault. (https://www.camaro5.com/forums/showthread.php?t=278136)

ManlyWalker 02-19-2013 05:07 PM

Damage Prevention Help....Wheelchair at fault.
 
I had a 2010 SS. and I learned the hard way what a wheelchair can do over time pulling it over myself to put in the passenger or backseats. The driver door where the Chevrolet logo is gets tore up. and the black plastic on the passenger side under the passenger seat belt. Any Ideas or references to anybody (Houston tx) will be greatly appreciated. Thanks
:help:

Rhyder 02-19-2013 05:09 PM

Im just impressed you have enough room to pull the wheelchair over yourself to the passenger seat.......

Steve Dallas 02-19-2013 05:32 PM

One thing I know I did with my SS was scratch the door panel with my watch every time I got the seatbelt.

ManlyWalker 02-19-2013 05:35 PM

haha thx. Simple really pull the chair up, transfer myself, take the wheel closest to me off(right wheel) throw in behind me. Lay the seat flat pull the chair in my lap with the left wheel still on. The wheel is now on top reach up undo the brake lift wheel off. place in passenger or back seat. Sounds tricky after taking a bit to get down takes me less than the average length of a song to jam out too:)

Rhyder 02-19-2013 05:36 PM

If your asking if they can be fixed, its been debated and the answer seems to be pretty unanimous that you have to replace the plastic pieces.

As far as the sill plate, you could paint it probably if dont want to replace it.

ManlyWalker 02-19-2013 05:40 PM

more like a 3m or just maybe anyone who could do custom work.

Rhyder 02-19-2013 06:24 PM

Quote:

Originally Posted by ManlyWalker (Post 6181946)
more like a 3m or just maybe anyone who could do custom work.

as far as replacing it? you would order the parts OEM.


All times are GMT -5. The time now is 01:12 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.