Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

GTAHVIT 05-26-2009 12:24 AM

Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12]
 
Ordered from Tom Henry Chevrolet.

Built by Tom Henry Racing

THR22 Supercharged 2SS/RS IBM Manual Transmission 552 RWHP 517 RWT

Discussion: Tom Henry Racing Supercharged SS...dyno video
Discussion: Tom Henry Racing Supercharged SS
Link: Tom Henry Racing Announces a Special Edition 2010

THR22 Build Pics Post #2
THR22 Videos Post #3

My experience with Tom Henry Chevrolet (THR)
My comments on my Pedders components / HD Radius Rod Inserts / Pedders FE 4/5 Rear Swaybar and LCA upgrade
Brake upgrade: CTSV Front Calipers, ZL1 Front Rotors, Pedders Stainless Brake Lines, SRF Brake Fluid and Hawk HPS Pads


http://www.camaro5.com/forums/pictur...ictureid=39825
  • Performance/Engine
Supercharger:
Magnuson - TVS 2300 (Installed by THR)

Dyno Tune:
PCM For Less (Original tune for THR)
EFI Alchemy (Local tuner after Airaid install)

Exhaust:
American Racing Headers (Installed by THR)
  • Long Tube Headers 1 7/8" primaries with 3" collectors
  • High Flow Cats
  • 3" X-Pipe
Tom Henry Racing - 2.5" Chambered Axleback/Muffler

Cold Air Intake:
Airaid - Modified to fit Magnuson 2300 (DIY, not a production CAI)

Catch Can:
Mike Norris (DIY)

Heater Hose Relocator:
TechAFX (Installed by TechAFX at C5FI)

Seperate Clutch Reservoir:
2SSRS (Ofer) (Installed by Hartley Automotive)
Thread

Short Throw Shifter:
MGW (DIY)

Suspension:
Pedders (DIY)
  • Supercar Coilovers
  • Supercar Sways: 27mm Front and 32 mm Rear (FE4/5 LCA upgrade, Installed by Hartley Automotive).
  • Adjustable End links: Front and Rear
  • Rear Cross Member Inserts
  • Front HD Radius Rod Bushing
  • Extended Range Alignment Bolts (On order)
Brakes:
MaureenM @ Rodgers Chevrolet (Installed by Hartley Automotive)
  • CTSV Front calipers
  • ZL1 Front Rotors
Stainless Steel Brake Lines:
Pedders (Installed by Hartley Automotive)

http://www.camaro5.com/forums/pictur...ictureid=39825
  • Cosmetic
Color Matched XM Antenna:
BeckyD @ Rodgers Chevrolet (DIY)
Discussion

Window Tint:
Roll'n Sound - SunTek 30/20

Heritage Grille - Paint Matched:
BeckyD @ Rodgers Chevrolet (DIY)
Link

Dove Tail - Blade Spoiler:
BeckyD @ Rodgers Chevrolet (DIY)
Link

ZL1 Front Fascia:
MaureenM @ Rodgers Chevrolet - Modified to match SS hood. (Installed by Hartley Automotive)

Lighting:
Advanced Automotive Concepts (DIY)
  • Concept Painted Tinted LED Side Markers
  • LED Daytime Running Lights
Painted Rear Diffuser:
Local Painter - Jason White


http://www.camaro5.com/forums/pictur...ictureid=39825
  • Interior
Pedals:
Lingenfelter - Billet Pedals (DIY)

Rear View Mirror with Backup Camera:
2SSRS (Ofer) - Mirror with video, camera and working Onstar (Installed by Ofer at C5FII)
Thread

Dash Ambient Lighting (ABL):
2SSRS (Ofer) - Light pipe and harness (Awaiting Install)
Thread


http://www.camaro5.com/forums/pictur...ictureid=39825
  • Wish List
Half Shafts:
Drive Shaft Shop

Clutch:
Centerforce or Street Slayer

Clutch Master Cylinder:
IDEALG - Rebuilt Stock Master Cylinder
Discussion

Coil Relocation Kit:
Mast Motorsports
Link

Paint:
Jay Moody - Hotrodpaint, Tucson AZ
Link

Wheels:
Bonspeed - Malibu 5 20X10.5 w/ 305 tires
or
Forgeline

Guages:
Autometer - Cobalt Boost and AFR
Boost
AFR

SS Emblem to replace Bowtie on Heritage Grille:
Sparks Restoration - Black with red letters
Image

GTAHVIT 05-26-2009 12:41 AM

Build Pics.
 
2 Attachment(s)
http://www.camaro5.com/forums/pictur...ictureid=39825

Fresh from the factory tucked away in Tom's garage.

http://www.camaro5.com/forums/camaro...G_4354_7_1.JPG

http://www.camaro5.com/forums/pictur...ictureid=39825

My car came with the very rare 1FLA option....

http://www.camaro5.com/forums/attach...chmentid=90736
http://www.camaro5.com/forums/attach...chmentid=90737
http://www.camaro5.com/forums/attach...chmentid=90739
http://www.camaro5.com/forums/attach...chmentid=90740

http://www.camaro5.com/forums/pictur...ictureid=39825

Which includes the snow drift location beacon...

http://www.camaro5.com/forums/attach...1&d=1265485856

http://www.camaro5.com/forums/pictur...ictureid=39825

Oh boy... Scott and Tom "testing" my car...

http://www.camaro5.com/forums/attach...1&d=1266000110
http://www.camaro5.com/forums/attach...1&d=1266001386

http://www.camaro5.com/forums/pictur...ictureid=39825

Supercharger and ARH exhaust install. Great Job Tony!

http://www.camaro5.com/forums/attach...1&d=1269462538
http://www.camaro5.com/forums/attach...1&d=1269462538
http://www.camaro5.com/forums/attach...1&d=1269462538
http://www.camaro5.com/forums/attach...1&d=1269462538
http://www.camaro5.com/forums/attach...2&d=1269980462

http://www.camaro5.com/forums/pictur...ictureid=39825

Final Dyno Numbers From Tom Henry

http://www.camaro5.com/forums/attach...1&d=1271039072

http://www.camaro5.com/forums/pictur...ictureid=39825

And finally picking up THR 22. Thanks again, to Tom, Fbod, Number 3, Pete, Speedster, Tag, MrC, Dragon, Cyn, Blade, Zebra, Mlee, 68, Shno and especially PQ for keeping me "occupied" while I waited. :thumbsup:

http://www.camaro5.com/forums/attach...1&d=1269979475
http://www.camaro5.com/forums/attach...1&d=1269979475
http://www.camaro5.com/forums/attach...1&d=1269979475

http://www.camaro5.com/forums/pictur...ictureid=39825

First pic back home in FL.

http://www.camaro5.com/forums/attach...1&d=1270422070
http://www.camaro5.com/forums/attach...1&d=1270422302

http://www.camaro5.com/forums/pictur...ictureid=39825

First Mod. Airaid asked me to modify and test fit an intake on the maggie.

http://www.camaro5.com/forums/attach...1&d=1272511156

http://www.camaro5.com/forums/pictur...ictureid=39825

TechAFX heater hose relocation kit. Hard to see in this pic. The heater hoses that normally run over the top of the passenger side valve cover are now routed below the passenger side heads, above the headers.

http://i268.photobucket.com/albums/j...acingGA/43.jpg
http://www.camaro5.com/forums/camaro.../EngineBay.jpg

http://www.camaro5.com/forums/pictur...ictureid=39825

First Cosmetic Mod. Color matched antenna from BeckyD@rodgers.

http://www.camaro5.com/forums/attach...1&d=1275496952

http://www.camaro5.com/forums/pictur...ictureid=39825

Personalized Plate

http://www.camaro5.com/forums/attach...1&d=1276028672

http://www.camaro5.com/forums/pictur...ictureid=39825

Heritage Grille, again from Becky.

http://www.camaro5.com/forums/attach...1&d=1287431523

http://www.camaro5.com/forums/pictur...ictureid=39825

Mike Norris Catch Can.

http://www.camaro5.com/forums/attach...1&d=1288193452
http://www.camaro5.com/forums/attach...1&d=1288505617

http://www.camaro5.com/forums/pictur...ictureid=39825

Coupe pics after a polish and wax.
Attachment 187543
Attachment 187544

http://www.camaro5.com/forums/pictur...ictureid=39825

Pedders Suspension

http://www.camaro5.com/forums/attach...1&d=1300545310
http://www.camaro5.com/forums/attach...1&d=1302144444
http://www.camaro5.com/forums/attach...1&d=1300553250
http://www.camaro5.com/forums/attach...1&d=1300727315

http://www.camaro5.com/forums/pictur...ictureid=39825

Lingenfelter Racing Pedals

http://www.camaro5.com/forums/attach...1&d=1305222935

http://www.camaro5.com/forums/pictur...ictureid=39825

Rear view mirror and camera from 2SSRS

http://www.camaro5.com/forums/attach...1&d=1305563966
http://www.camaro5.com/forums/attach...1&d=1305585981

http://www.camaro5.com/forums/pictur...ictureid=39825

Blade Spoiler From BeckyD @ RodgersChevrolet

http://www.camaro5.com/forums/attach...1&d=1318873422

http://www.camaro5.com/forums/pictur...ictureid=39825

Concept Side Markers from AAC

http://www.camaro5.com/forums/attach...1&d=1318873422

http://www.camaro5.com/forums/pictur...ictureid=39825

Painted Rear Diffuser

http://www.camaro5.com/forums/attach...1&d=1327282368

http://www.camaro5.com/forums/pictur...ictureid=39825

Upgrade to Pedder FE4 Rear Sway Bar (32mm)

http://www.camaro5.com/forums/attach...1&d=1342805443

http://www.camaro5.com/forums/pictur...ictureid=39825

ZL1 Front Fascia

http://www.camaro5.com/forums/attach...1&d=1341514901

http://www.camaro5.com/forums/pictur...ictureid=39825

Seperate Clutch Reservoir

http://camaro5.com/forums/attachment...1&d=1345054215

http://www.camaro5.com/forums/pictur...ictureid=39825


Brake upgrade - Powdercoated SS rear and CTSV front calipers, with ZL1 front rotors.

http://camaro5.com/forums/attachment...1&d=1344800413

http://camaro5.com/forums/attachment...1&d=1344892455

http://www.camaro5.com/forums/attach...1&d=1348249304

http://www.camaro5.com/forums/pictur...ictureid=39825


http://www.camaro5.com/forums/attach...1&d=1348249216

GTAHVIT 05-26-2009 12:51 AM

Videos
 
Exhaust clip.



Take off and Fly By.



DIY Color Matched Antenna Part I



Part II



DIY: Heritage Grille Part I



Part II



Dyno Vid: Retuned THR22 for the FL Climate



DIY Install Catch Can on a LS3 with a Maggie.


GTAHVIT 12-14-2009 12:42 AM

Well guys.

My plans changed.. Even though we are relatively certain that the Z28 will be here eventually, I can't wait any longer.

I've decided that Tom Henry has the best setup for me. I've updated my OP with the information on my build. His new Supercharged THR cars have everything I wanted with one stop shopping.

I'll post all the updates here as things progress.

I even changed my color.. Order number is in hand, now just waiting on the car. Tom has been awesome to work with. :thumbsup:

More to follow!

zebra 12-14-2009 12:44 AM

congrats!! :clap:

we all knew you'd cave eventually :laugh:

SScattergunSS 12-14-2009 12:45 AM

Quote:

Originally Posted by GTAHVIT (Post 1281677)
Well guys.

My plans changed.. Even though we are relatively certain that the Z28 will be here eventually, I can't wait any longer.

I've decided that Tom Henry has the best setup for me. I've updated my OP with the information on my build. His new Supercharged THR cars have everything I wanted with one stop shopping.

I'll post all the updated here as things progress.

I even changed my color.. Order number is in hand, now just waiting on the car. Tom has been awesome to work with. :thumbsup:

More to follow!

WOW, this is great!!! :w00t:

Mr Twisty 12-14-2009 01:15 AM

How are you sleeping? :happyanim:

GTAHVIT 12-14-2009 02:09 AM

Quote:

Originally Posted by zebra (Post 1281688)
congrats!! :clap:

we all knew you'd cave eventually :laugh:

:sm0:

Quote:

Originally Posted by SScattergunSS (Post 1281694)
WOW, this is great!!! :w00t:

:thumbup:

Quote:

Originally Posted by MisterCamaro69 (Post 1281807)
How are you sleeping? :happyanim:

I'm still posting at 2am.... :iono:

Mr Twisty 12-14-2009 08:41 PM

Quote:

Originally Posted by GTAHVIT (Post 1281908)
:sm0:



:thumbup:



I'm still posting at 2am.... :iono:

Ask Pedders Pete about his pedal setup. :thumbsup:

speedster 12-14-2009 08:54 PM

The anticipation and careful (OK, some impulse) planning have paid off. GTA's car will be a screamer and look good too !! :thumbsup:

GTAHVIT 12-14-2009 09:50 PM

Pedals... I forgot all about that... I need to do that.

:thumbsup: thanks speed!

Chewy 12-14-2009 10:14 PM

Umm, chris....ur gonna have to pic a different engine cover cuz i want the WCC one lol

PQ 12-15-2009 12:32 PM

Late to the party but quick to jump on the mods.

Just think, yours will be shinier than most of ours.

Mines gonna have about 30k by then.

GTAHVIT 12-15-2009 12:36 PM

Well Tom's setup on these cars is tough to argue with... And he kinda pushed me while I was trying to jump off that cliff...

:laugh:

PQ 12-15-2009 12:38 PM

Hmmmmmm. Maybe I should stand on the edge of the cliff too?

GTAHVIT 12-15-2009 12:40 PM

Quote:

Originally Posted by PQ (Post 1286595)
Hmmmmmm. Maybe I should stand on the edge of the cliff too?

It doesn't hurt till you have to write the chack.... Promise... :D

Camaro_Corvette 12-15-2009 12:48 PM

:drool: Can't wait to see the final product!

EDIT: BTW, it's DSV customs, not DVS customs.

PQ 12-15-2009 01:09 PM

I feel like mines wasting away. Just don't have the BIG funds to do it all now.

Hey Chris, how many has TH done so far?

GTAHVIT 12-15-2009 01:30 PM

Quote:

Originally Posted by PQ (Post 1286715)
I feel like mines wasting away. Just don't have the BIG funds to do it all now.

Hey Chris, how many has TH done so far?

Supercharged Cars... Only the prototype so far.

GTAHVIT 12-15-2009 01:30 PM

Quote:

Originally Posted by Camaro_Corvette (Post 1286626)
:drool: Can't wait to see the final product!

EDIT: BTW, it's DSV customs, not DVS customs.

woops fixed.

PQ 12-15-2009 01:46 PM

Quote:

Originally Posted by GTAHVIT (Post 1286805)
Supercharged Cars... Only the prototype so far.

:confused0068:

You feel ok about that? I mean, I'm sure it'll be fine and plus there will be a few jout there by the time yours is done but I assume you saw the prototype and how it runs?

GTAHVIT 12-15-2009 01:59 PM

Quote:

Originally Posted by PQ (Post 1286868)
:confused0068:

You feel ok about that? I mean, I'm sure it'll be fine and plus there will be a few jout there by the time yours is done but I assume you saw the prototype and how it runs?

Nope...

Just the vid in the original thread Tag posted....

Stop being such a sissy.. :rolleyes:



:laugh:

Camaro_Corvette 12-15-2009 01:59 PM

Quote:

Originally Posted by GTAHVIT (Post 1286908)
Nope...

Just the vid in the original thread Tag posted....

Stop being such a sissy.. :rolleyes:



:laugh:

:sm0:

speedster 12-15-2009 02:03 PM

Quote:

Originally Posted by PQ (Post 1286868)
:confused0068:

You feel ok about that? I mean, I'm sure it'll be fine and plus there will be a few jout there by the time yours is done but I assume you saw the prototype and how it runs?


Hey PQ - something tells me Tom Henry Racing is not going to put their name on a product that fails...

Besides, GTA will have time to stomp on it and if something breaks- we'll fix it before the Fest. There is a backup LS3/L99 floating around if someone on here toasts their engine before C5F. ;)

PQ 12-15-2009 02:19 PM

I'm paranoid, I know.

Remember, though, I'm just now after 7 months starting the process of doing warranty voiding stuff to my car.



PQ + Mods = :yikes:

zebra 12-16-2009 05:49 PM

Quote:

Originally Posted by PQ (Post 1286980)
I'm paranoid, I know.

Remember, though, I'm just now after 7 months starting the process of doing warranty voiding stuff to my car.



PQ + Mods = :yikes:

but making yourself start is the worst part. the first real modification i did to anything on my truck was clearing the headlights. even that seemed scary at the time :yikes: i was like "you mean i have to cut open my headlights & re-seal them with a tube of silicon?!?! :scared0016:"

2 years later, i've drilled holes in my dash, disabled systems with a resistor & e-tape, even dropped in an engine that wasn't "supposed" to be mated to my transmission. :headbang: i'm fixing to redo my CAI (eventually involving some custom ducting) and a few other mods as well. once you start, it won't bother you at all :thumbsup:
then again, i ain't got a warranty to contend with... oh well


sorry to :threadjacked: GTA

GTAHVIT 12-16-2009 05:58 PM

Quote:

Originally Posted by zebra (Post 1291793)
but making yourself start is the worst part. the first real modification i did to anything on my truck was clearing the headlights. even that seemed scary at the time :yikes: i was like "you mean i have to cut open my headlights & re-seal them with a tube of silicon?!?! :scared0016:"

2 years later, i've drilled holes in my dash, disabled systems with a resistor & e-tape, even dropped in an engine that wasn't "supposed" to be mated to my transmission. :headbang: i'm fixing to redo my CAI (eventually involving some custom ducting) and a few other mods as well. once you start, it won't bother you at all :thumbsup:
then again, i ain't got a warranty to contend with... oh well


sorry to :threadjacked: GTA

It's all good.


MrC why the delete?

PQ 12-16-2009 06:02 PM

Quote:

Originally Posted by zebra (Post 1291793)
but making yourself start is the worst part. the first real modification i did to anything on my truck was clearing the headlights. even that seemed scary at the time :yikes: i was like "you mean i have to cut open my headlights & re-seal them with a tube of silicon?!?! :scared0016:"

2 years later, i've drilled holes in my dash, disabled systems with a resistor & e-tape, even dropped in an engine that wasn't "supposed" to be mated to my transmission. :headbang: i'm fixing to redo my CAI (eventually involving some custom ducting) and a few other mods as well. once you start, it won't bother you at all :thumbsup:
then again, i ain't got a warranty to contend with... oh well


sorry to :threadjacked: GTA

I'll get there.




GTA, are you gonna track it at all before the Fest?

GTAHVIT 12-16-2009 09:33 PM

Quote:

Originally Posted by PQ (Post 1291859)
I'll get there.




GTA, are you gonna track it at all before the Fest?

Probably not... the fest will probably be it's first run.

PQ 12-16-2009 10:15 PM

Gonna be pushin' it to get it done anyway probably.

GTAHVIT 12-16-2009 10:16 PM

she should be ready early March.

:thumbsup:

zebra 12-16-2009 10:41 PM

just in time for my birfday!

PQ 12-18-2009 11:03 AM

Dude I can't wait to see your car. I have NO DOUBT that after seeing it, I'm gonna have to do it. I'll have a good bottom breathing set up by then.

ShnOmac 12-20-2009 05:32 AM

Quote:

Originally Posted by GTAHVIT (Post 1293211)
she should be ready early March.

:thumbsup:

Nooooiice :drinking: :clap:


You still suck...

;)

Chewy 12-20-2009 02:01 PM

Quote:

Originally Posted by GTAHVIT (Post 1292952)
Probably not... the fest will probably be it's first run.

i'm going to need practice before fest tho. I'm sure 68 and i can persuade u into going before than:D

PQ 12-20-2009 02:39 PM

So, Chris? Are you gonna get any 'Build Pics' when they do it? Would be nice to have. ;)

CynAgain 12-20-2009 04:12 PM

:popcorn:

GTAHVIT 12-21-2009 09:54 AM

Quote:

Originally Posted by PQ (Post 1304962)
So, Chris? Are you gonna get any 'Build Pics' when they do it? Would be nice to have. ;)

I'll send Tom a Camera if I have to... :headbang:

Quote:

Originally Posted by CynAgain (Post 1305180)
:popcorn:

You and me both sister!

Tom Henry Racing 12-30-2009 11:00 AM

Thought I would jump in, no problem with build pics, I will take it as we go. As for the supercharger install, we did a truck program with Joe Gibbs in 2005 and have done multiple installs. We also have built some stroker motors etc in house. My shop is not a normal dealership shop. We are going to do a before and after dyno on the car also to check everything out.

PQ 12-30-2009 12:25 PM

Quote:

Originally Posted by Tom Henry Racing (Post 1331532)
Thought I would jump in, no problem with build pics, I will take it as we go. As for the supercharger install, we did a truck program with Joe Gibbs in 2005 and have done multiple installs. We also have built some stroker motors etc in house. My shop is not a normal dealership shop. We are going to do a before and after dyno on the car also to check everything out.

Awesome. I have no doubt I'll be stopping in (ok, calling) I'm gonna check out Chris's when You guys are done. he said I can borrow it for a couple weeks. I can't wait.


All times are GMT -5. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.