Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro V6 LLT Engine, Exhaust, and Bolt-Ons (https://www.camaro5.com/forums/forumdisplay.php?f=38)
-   -   Kissimmee Florida - MRT 2 and Throttle Body install (https://www.camaro5.com/forums/showthread.php?t=208942)

jeremy3721 03-11-2012 11:38 PM

Kissimmee Florida - MRT 2 and Throttle Body install
 
Can anyone recommend a place near Kissimmee Florida where I could get MRT2 axel backs installed on my 11 vert? Think I want to do the ported throttle body too so might look to kill both at one time.

khabboub 03-12-2012 12:13 AM

you should have posted this in the florida forum.

BUT ANYWAYS, in your drive way!!!!!!

jeremy3721 03-12-2012 12:27 AM

Yeah, the throttle body looks like an easy one but not so sure about doing the exhaust myself.

Sorry, not sure how to move a thread.

khabboub 03-12-2012 12:59 AM

dont worry about it dude. someone will answer your question in a bit, or a mod might move the thread.

nyrfan 03-12-2012 05:15 AM

I took my car to a local midas for my MRT's, cost $90 to have them welded. As for the TB, I'm in Orlando, if you want to come to my house I'll help you do it. Will take all of about 15 minutes.

Strider044 03-13-2012 12:17 AM

http://orlandomuffler.com

Had my mrt2.0 installed there like 3 or 4 months ago. They weld it on and check there work. I think it was like 50-75 bucks. Call them and ask they are nice people.

csorrentini 03-13-2012 08:40 AM

i have the MRT 2.0 and did it myself no problem its SUPER easy. The only thing you "may" need help with would be if you welded it on instead of bolting it on (which i recommend) but that could also be done by yourself. Congratz on the exhaust your gonna love the sound!

Abstrak 03-13-2012 10:56 AM

Quote:

Originally Posted by csorrentini (Post 4635750)
i have the MRT 2.0 and did it myself no problem its SUPER easy. The only thing you "may" need help with would be if you welded it on instead of bolting it on (which i recommend) but that could also be done by yourself. Congratz on the exhaust your gonna love the sound!

Im getting my MRT 2 and CAI at the end of the month what is the benefit of welding over bolting on ?

nyrfan 03-13-2012 11:43 AM

Quote:

Originally Posted by Abstrak (Post 4636377)
Im getting my MRT 2 and CAI at the end of the month what is the benefit of welding over bolting on ?

Less chance of a leak and will hold the exhaust more securely.

CrzyGamr2 03-13-2012 04:56 PM

I also live in Kissimmee and installed my MRT about two months ago in my driveway. A saws-all is a must. Just measure three times and cut once. Putting some band clamps around the exhaust at the point you're cutting helps a lot and gives you something to keep the blade in line.
As for the throttle body, myself and a friend of mine who's on the forum, are driving down to Bradenton to see RX performance. Gonna have em install a few small things and see the TT V6.


All times are GMT -5. The time now is 04:11 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.