There's a solution to your fluid problems.....


..... I use compressed air, and it's $0.00 a pint :thumbsup:

GTAHVIT uses orange juice.

We use air brakes on our trucks at the station, all is good and well until you run out of compressed air :yikes:

:confused0068:

:help:

Brake fluid you can drink in an emergency..... I like it

:sm0:
It's not so bad, you just skid to a stop... actually kinda fun :laugh:

Semi uses 22.5 wheels, some donks are bigger than that, so the drums could conceivably fit... add brake pots, air dryer, replace that goofy parking brake handle with a cool knob on the dash, you're good to go racing! :thumbup:

:bellyroll:

and at $70 a bottle you'd save a pretty penny.

how bout some rotors and calipers....:paddle:

I have a set... LOL but I don't think they are gonna be any better than what you have now... ;)

does the carbon ceramic kit swap over to the camaro?
i know a guy put them on his C5 vette, but that's the same basic platform

Braking is over-rated. :bellyroll:

From the ZR1?

early on guys were talking about doing it but there was something wrong with the ABS computer on the Camaro. From what the GM guys said (can't remember who it was now) the camaro abs computer doesn't work well with the ZR1 brakes. But Man that would be the ultimate setup for a camaro.. Talk about a budget way to get a full CS bake setup...

too complicated for you auto guys huh? I guess you think the car should stop for you too.

:D

STOPPING is over-rated. :bellyroll:

Revers thrusters.

no need to stop, just turn fast.

They're great. For a car that weighs 3400 lbs. You're better with the CTS-V setup :thumbsup:

+1 :thumbsup:

There is a full system with GT-R Calipers and Carbon Ceramic Rotors we have spec'd out with Brembo specifically for the 5th Gen. They are incredible brakes, but they are incredibly expensive. I hope we find a client that is interested in this level of perfection... soon.

Yep!

With the setup I have now, when I'm out goofing off, I keep pulling up short in the turns...

It's hard to make your self brake later then you are used to.

:laugh:

Maybe Speedster? :headbang:

When you normally brake, just hover for a sec lol

budget? well, if $8500 is your brake budget, i guess that's about right...
and i couldn't remember if the ABS was a problem or not. i ain't really had much time or reason to keep up with the camaro mods since i joined the AF. really nowadays, i just stick around to hang out with y'all :thumbsup:

http://www.youtube.com/watch?v=nkuqsd_tRHw

that's what i was thinking - just seeing if anybody's tried it

oooohhhhhhh!!! good luck :thumbsup:

better than coming up short in life like some others we know...
like around 5' 3" short... :bellyroll:








naw, nothin but :respekt: Randy!

There are a number of Pro-Touring Builds running ZR1 brakes with an adjusted ABS cal. The issues you have with that setup are the limited selection of pads and the cost of replacing a SCRATCHED rotor. If you go off course and a pebble or two happen to scratch your brand new ZL1 rotor be prepared to chuck it in the garbage. Now the carbo rotors we have specd with Brembo are still good even with a scratch ;-)

double-win if they're under $1200 a piece :thumbsup:

Psh............... I'm WAY taller than that......









1 whole inch taller........ :bellyroll:

oh, i'm sorry. you're right - much taller than that.









in certain respects, 1" really makes a HUGE difference!

I think retail is 2K

Like thottle position. :D

that was the number given by the guy who put them on his C5.
he bought his stuff through GM.

certainly! :burnrubber:

Dude. This thread could use more power.

You should get a cam and pulley down. Bigger injectors and a ZL1 fuel pump.

Just an idea.

For your new ZL1 front end...

...a little light control
http://www.camaro5.com/forums/showth...=1#post5544665

Yep. I need to get in on that.

I still need to power up my fog lights.

OH what bulbs did you get for the fogs?

Now I know it's an H11 connector, so that would mean H11 bulb, correct?

http://images.esellerpro.com/2133/I/...g%20socket.JPG

Not much going on but I made some minor touchups to THR 22

New Tom Henry decal and put some brembo decals on the calipers. :D

:confused0068:

Dude.

That looks awesome.

Now THAT's a pic.

:D Oh and BTW the calipers are red... just sayin...

I don't know why you keep saying that.

Attachment 424632

:laughabove:

AAC sells a combo P13Plasma DRL and Fog package that match. If you use a harness you'll need a match since they can be powered up together. On stock cars DRL turns off when Fogs turn on.

Don't lift until you see God. Visiting is cool, but long stays tend to leave a mess behind.

Lmao, how true...

:laugh:

Mine was more like.... sending an email... Asking for .... help... :Whoa5thGenSmall:

:sm0:

Oh Sh.... qualifies as an email :sm0: