SS 1LE Wheel offsets?
 

trying to find out if the offsets differ from the regular SS.


I'm trying to go down to 19" wheels with same width ( 10"/11" front/back)


sorry.. my search fu is lacking


ANSWER:


20x10 20mm offset.

20x11 43mm offset.

wrong!

20mm
43mm

I started thread w numbers

20mm is wrong 25mm is right

Not this again. :)
I thought for it was 20. Then everyone started saying 25.

Then we got back to 20mm. Final answer

I say its 20mm.

Cars are out. Someone measure please

I will look when they pull the OEM wheels off my car to put on my winter setup!

If it's same as Gen5, then it would be +23, +43. Please let us know!

Time to end this debate! Haha I finally got my other wheels on and I took a picture of the inside of the OEM wheels.

Fronts are 20 offset

Rears are 43 offset

GREAT INFO! I was wrong!

Thanks for the information

Concerning the offset, I've read that the 1LE front wheel actually sticks out of the wheel and the ZL1 extended the fenders to cover them.

Anybody have pics of the 1LE front wheel in relation to the wheelwell?

It doesn't really stick out, it's about flush, the angle can make it look otherwise. The rear is in a tad as the rear fenders are wider than the fronts...

The stance in the front is perfect, wish the rears were as aggressive visually.

For what it's worth, I got 20x10 front wheels with a 35mm offset (Factory Reproductions Style 41) and used a 5mm spacer, essentially making them 30mm offset, this made them perfectly flush with the outside edge of the fender

Agree....parked beside a zl1 the other day (failed to take pics)...honestly our 1le has a meaner stance with the tires sitting flush to just a tick outide the fenders than does the zl1 with its wider fenders. My opinion, but my wife, who cares none what so ever did agree as well....1le better stance