Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   USA - Texas (https://www.camaro5.com/forums/forumdisplay.php?f=68)
-   -   El Paso Chapter of Camaro5 (https://www.camaro5.com/forums/showthread.php?t=74391)

mws444 04-08-2010 08:24 AM

I have the 305 Nitto 555r DR's on an 11.5" rim, John at CCW said they are as wide as the Pzero 315's. I guess we will see when they get here.
I will bet those tires really fill out your cars rear end. You comming to the show at mission on Sat.?
I would love to see how they look.

El Chorizo 04-08-2010 08:27 AM

Quote:

Originally Posted by mws444 (Post 1691531)
What did you do with the e-brake cable? I have zipties on mine now but want a more robust long term fix.

You have to drop the driveshaft to get to them and remove a plate, but further up the driveshaft you can "cross" the cables which puts more tension on them and makes plenty of room to clear the wheels.

By Cross them I mean, make the right rear go to the left rear and vice versa and that reduces the amount of slack in the lines plenty.

Hope this helps.

RobertHarriSS 04-08-2010 10:47 AM

Quote:

Originally Posted by mws444 (Post 1691540)
I have the 305 Nitto 555r DR's on an 11.5" rim, John at CCW said they are as wide as the Pzero 315's. I guess we will see when they get here.
I will bet those tires really fill out your cars rear end. You comming to the show at mission on Sat.?
I would love to see how they look.

Just have the zip ties for now.
I might come down for Saturday. I'll have to see what's up with the gf.

alex33x 04-08-2010 11:33 AM

Quote:

Originally Posted by jose1003 (Post 1685069)
hey alex how much is the clear bra:D

The clear bra runs about $600 on the front end, prices increases depending where else you want it.

It's not easy to put on it needs to be professionally installed, $600 is a steal compared to how much it is in other cities.

Quote:

Originally Posted by mws444 (Post 1691540)
I have the 305 Nitto 555r DR's on an 11.5" rim, John at CCW said they are as wide as the Pzero 315's. I guess we will see when they get here.
I will bet those tires really fill out your cars rear end. You comming to the show at mission on Sat.?
I would love to see how they look.

I also have nittos in the back I really dont like them but its the only drag radial they make in a 20.

mws444 04-08-2010 07:26 PM

Quote:

Originally Posted by El Chorizo (Post 1691556)
You have to drop the driveshaft to get to them and remove a plate, but further up the driveshaft you can "cross" the cables which puts more tension on them and makes plenty of room to clear the wheels.

By Cross them I mean, make the right rear go to the left rear and vice versa and that reduces the amount of slack in the lines plenty.

Hope this helps.

Hell yeah it helps. I guess when I do the suspension I will add this step to the work. Thanks!

mws444 04-08-2010 07:28 PM

Quote:

Originally Posted by alex33x (Post 1692429)
The clear bra runs about $600 on the front end, prices increases depending where else you want it.

It's not easy to put on it needs to be professionally installed, $600 is a steal compared to how much it is in other cities.



I also have nittos in the back I really dont like them but its the only drag radial they make in a 20.

I am hoping the MT 18" DR's will stick to the track a little better, but when its covered with sand less tread is worse. Plan on the Nittos for around town use.

mws444 04-08-2010 07:30 PM

Quote:

Originally Posted by RobertHarriSS (Post 1692202)
Just have the zip ties for now.
I might come down for Saturday. I'll have to see what's up with the gf.

Look forward to seeing you and checking out those new shoes!

jose1003 04-08-2010 07:38 PM

Quote:

Originally Posted by viper1cobra (Post 1689361)
Hows class been, Jose?:iono:

Are you going to be at the Car Show?:iono:

hey eric how u been?:chevy:
thanks for asking :Dgoing really good, just been busy with school and work.
I dont know if ill make the car show i work early saturday
but i could probably make it after work depending on job

who here in el paso is going out there?
and where is it being held?

jose1003 04-08-2010 07:39 PM

Quote:

Originally Posted by RobertHarriSS (Post 1690045)
Just got finished putting them on about 6:30.
Attachment 110661

nice:thumbup:

mws444 04-08-2010 07:48 PM

It's at Mission Chevrolet, setup is from 8 to 10. I will be there.
Eric you coming?

viper1cobra 04-08-2010 07:50 PM

Quote:

Originally Posted by jose1003 (Post 1694835)
hey eric how u been?:chevy:
thanks for asking :Dgoing really good, just been busy with school and work.
I dont know if ill make the car show i work early saturday
but i could probably make it after work depending on job

who here in el paso is going out there?
and where is it being held?

I am taking the day off, so that I can attend.:happyanim:

It is being held at Mission Chevrolet, on George Deiter.:w00t:

Hope to see you there.:thumbsup:

RobertHarriSS 04-08-2010 08:50 PM

2 Attachment(s)
Better pix of the 505a's
Attachment 111003
Attachment 111004

viper1cobra 04-08-2010 08:56 PM

SWEEEEET!

Are you coming to the Car Show Robert?:iono:

El Chorizo 04-09-2010 12:18 AM

Good looking wheels, I had those same wheels on my Viper and loved em.


All times are GMT -5. The time now is 06:11 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.