Free boost modification
How many guys have done the bypass boost modification on their LSA engine where you slightly tilt your supercharger bypass valve counter clockwise to seal in boost a little better?
|
|
That is very interesting, thank you for letting us know. Is there a down side to going this ?
|
Thanks for the info. That is something simple and definitely worth trying.
|
Hmmm, I may have to try this.
|
If there is a slight opening as it comes from the factory, could it be intentional, and if so, what was the reason??
|
why not simply adjust the set screw?
|
Quote:
|
Just did it normally my boost swings between 7.83 - 8.55psi
Tonight I saw it hit 9.57psi and it was generally above 8.7psi usually sitting at 8.99 - 9.28psi I also didn't undo the first bolt simply loosened the other 2 on the adjustment made sure i left 0.5 to 1mm clearance from the set screw. I guess you do not adjust the set screw because it is harder to get to. |
:frusty:Nothing is free somewhere down the road it will cost you!!!
|
This looks like a good one!!
|
Quote:
|
ok i know what I'm going tonight.:thumb:
|
Groovy, I will be watching this thread.
|
All times are GMT -5. The time now is 12:51 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.