wow man those rotors and calipers look super cool ,what color are you gonna paint the calipers and are you gonna put any decals on them like brembo or something else?
Quote:
|
Quote:
i'll try to take a look after work |
Grrr, I forgot to order new seals for the calipers.... Need to get hot on that... The guy said he should be able to save them but gave me the, I'm not responsible if they tear speech. Can't blame him....
Quote:
Quote:
Quote:
|
1 Attachment(s)
My brake project.....
You know all that advice our Dad's have given us about, don't wait till the last minute, check, double check and triple check that you have all the parts. Order everything in advance... yeah... well you'd think at 39 I'd be better at following that advice. I was originally planning on get the calipers powdercoated by last Friday and installed over the weekend... We had a small delay when the powder coater wanted to remove the pistons and seals prior to powder coating... which I was fine with but after doing some research on what it would cost to rebuild the fronts I had them put a hold on the job. It would cost me about $500 for a rebuild kit on the fronts and no one had them in stock... So, I made a bunch of calls asking if the brake internals would handle the powder coating heat and media blasting. In the end everyone agreed that they would be fine and I picked them up on Monday. They look fantastic. :D I had already ordered the SRF (liquid gold) brake fluid and was planing on getting my pads Pins and clips I needed for the front and rear brakes locally. Uhm... Stock front CTSV pads are really spensive... LOL and again not in stock anywhere... The Cadillac front pins are $60 apiece and I'd need 4. And again... NOT in stock anywhere. So the shops who I use and I start making calls to see how quickly we can get aftermarket stuff... Luckily we find some Hawk HPS pads which should be here by Friday. And the pin/clip hardware which will be here Friday as well. I know they aren't OE pieces and cheaper but I'm thinking they should do fine. The plan is to get the ss brake lines and calipers back on the car this weekend and then I'll have to go to a shop with a Tech II machine to flush the DOT 3 fluid out and replace it with the liquid gold, to ensure the ABS system is properly flushed... I'm running out of time..... :scared0068: |
So, you're going to keep the SS brake set up on for now? Is that what I read in the last paragraph?
And that advice thing; it doesn't kick in until 40~ish :) Those calipers look great though! |
Quote:
Worst case I'll have to go to the fest on red rear calipers and stock fronts. :laugh: If all goes well, I'll get all the parts I need by end of week, get the fronts installed get the fluid flushed and be ready to hit the road to the fest. :D |
Quote:
http://www.camaro5.com/forums/attach...2&d=1338924569 |
:laughabove:
but why do you need a TechII for a brake flush? that's a computer reader/programmer. or is it to make the ABS module open up or something? |
Quote:
|
Quote:
|
Quote:
Quote:
Calipers look amazing brother... Kudos... |
Did you know that Bruce sells tires????
|
I was thinking of doing my calipers red. It wouldn't flow with the color of the rest of the car (so I thought) until I saw two red flags over at my gym in perfect location in front of the sides of the wheels as I was walking up to my car.
You get the idea...the red was there against the rims and it actually looked kinda cool. I'm going to give it some thought. |
2 Attachment(s)
Quote:
Quote:
".... among the faithful" ;) Quote:
here's what they look like on the rear. |
All times are GMT -5. The time now is 05:54 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.