:popcorn:

while he's wheel hoppin around St Augustine, i'll be praying & begging for traction in atlanta

THIS is wheel hop :D

http://i510.photobucket.com/albums/s...avi_image2.jpg

:D :wave:

:laughabove:

Chris, when you go to install your Plasma's, hard wire them in. Don't cut the wires from the plasmas to the connector. Just cut and hard wire the wires after that which make them the full time "on" DRL's. ....if that makes sense. I think I need to take pix..hold up, I think I have one.

Long story short, there's a single wire with a wire tap at each end. It's supposed to connect between either the pos or neg (can't remember) from the car to the bulb socket (where the plasma plugs in) and between the pos or neg between the car and the side marker light. They give you these two T-Taps that just go in line. Sure, might be kind of fast and easy to just tap them in there. But, many of us have had the "blinking on and off"" DRL's that have been driving us nuts.

The solution? Cut out the T-Taps. Hard wire. Let's see if I have that pix...

wow....big pic...lol

Cool! thanks for the tip :thumbsup:

I spy a LEO notebook in that picture

LMFAO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Get the rear negative camber reduced as far as you can with the OE adjusters. If that doesn't do it we go with Pedders Extended Range Eccentrics. BTW, reducing negative rear camber also reduces understeer. Your car will be better on the strip and in the twisties.

Cool... will do. I really need to start autocrossing this thing...

I need to think about a weekend warrior wheel tire setup on all 4 corners that I can drive to the events on...

Forgeline 19x10.5s on RE11 305/30/19s. The setup is sick. It even works on Challengers -- with the right offset. These are 85% runs at best during our shakedown day at VIR.





Of course the top performing of the three (Camaro, Challenger & Mustang) is...































:chevy: :chevy: :chevy:



:chevy: :chevy: :chevy:

What we have worked out with our friends at Forgeline is more than wheel offset for clearance. We even the front and rear track for a square track and a square tire setup.

gah... Ok need the details on this setup...

Can I go to Forgeline and ask for the JusticePete setup???

;)

Almost, ask for the Pedders setup. Tell the owner Dave Schardt that Pete sent you ;)

So no donks then? :bellyroll:

so now the decision is..... save money for DD wheels and tires....

or keep the stockers and get the track day setup... I need a 3rd job...

NO but!!! there is a sweet set of D2 Forged in the members classifieds you might like :thumbsup:

You already have daily drive wheels. These are your business wheels GA3

http://www.forgeline.com/product_ima..._image-379.jpg

When you order, make sure the include lightening pockets in the back of the hubs. Every ounce counts.

Dave and Forgeline make great racing products. You know you gotta have 'em... :D

+1 for the forgelines. Great quality products that just perform!!

Dooooooo eet!!


Sent from my iPhone using Tapatalk

Attachment 271557



:bellyroll:

OMG!!! :laughabove:

I'm choking on my coke..

BWUAAAAAHAHAHAHA :laugh:

I have a set of 22s for sale... cheap!

but nobody who goes fast uses 22s...

Cept me. :D

Exactly!

PQ is delusional.

I'm jist sayin..... yahno whaim sayain.... http://www.camaro5.com/forums/albumt...?dl=1311132740

I'll be right over...

What does that about GTAHVIT? He lost to PQ at Firebird.

It says he needs a driver mod.

AH HEM!!!

It says PQ needed to borrow some 18" drag radials to beat me...:mad0260:

Why does everyone keep forgetting that little tidbit... :iono:

We have more fun :sm0:

Because it's so fun to watch you repeat this.

I'm pretty sure your camaro was a manual.....

more fun giving me a hard time it seems...



:mad0259:





stupid randy... :emoticon3:



:laugh:

:sm0:

:wave:






Bully.

Seems so ironic when you say it......

I do believe your name is in the OP of the challenge thread... NOT mine...

I really like this thread. Good night all.

Night Pete.

I thought it was because Randy couldn't roll down the dragstrip on his Flintstone wheels, so someone lent him a set. They just happened to be 18" and had some drag radials on them...right Randy?

It's ok, you're gonna smoke Phone book next fest, right?

Even Tulsa has to schedule Oklahoma every once in a while. :laugh:

What would App. State be without Michigan?
What would David be without Galiath?

:bellyroll:

:drinking:

He told me I could......... :iono:

I don't think he expected 18 inch super light drag wheels and coaching. :bellyroll: :bellyroll: :bellyroll:

I got chris's back if he needs any help, and remember pas ( point and shoot ) driver got hole shot bad, and it would have been really interesting if Chris hadn't spun so bad at the top of first...

And yes, Fred wheels might look good but they suck at rolling.....