MEET BIG RED 312hp and counting [COTW 11/28/11]
11 Attachment(s)
:chevy:I got my 2010 Camaro 2LT RS on June 26 2009 since then a lot has been done to her here are some of the mods i have done. I also won second place at the Camaro nationals in carlisle and second place at the river front Camaro show in Wilimington Delaware. Here is a little story I am only 14 years old my dad bought me this car for me. I do all the mods to it. I also made a little camaro club in our area we have around 10 guys in our club I am always doing something to the car.In 2 years I will be able to drive:chevy::chevy::happyanim::happyanim:
Thanks Richie Attention: All rights reserved. Any and all photos/videos found within this thread may not be copied, edited, reproduced, linked, or displayed in any form or by any means; electronic, mechanical, optical, or otherwise, without prior written permission from myself. If you wish to use any of the photos/videos found within this thread please contact me. MAIN OBJECTIVE: Different from everyone else, Light weight V6 with some more power than stock, performs well as a daily driver but when you take it to the track the true potential comes to life. MODS DONE 1.Cyber gray rally stripes 2.Flowmaster axleback exaust 3.Slp blackwig cold air intake 4.All chrome under the hood 5.AAC fog light halo kit (red) 6.AAC blue footwell lighing 7.AAC RED bowtie 8.AAC v2.o scaneer one under the hood and one in the rear of the car 9.AAC red pod light 10.AAC White licience plate bulbs 11.AAC Red led side markers 12.AAC P13 foglights-SWITCHED TO P13 PLASMA BULBS 13.Gm Satin gas cap 14.T-rex CHROME GRILL 15.Red chevorlet center caps 16.Rear trunk lid blackout 17.Chevorlet sill plates 18.Custom chevy nameplate (under the hood) 19.Emblem pros custom plaque 20.Chrome exaust trim rings 21.GTS rear solar wing 22.chrome rear light surrounds 23.Chrome interior nobs 24.ALL lights 50% tintited 25.DSV customs e-brake boot 26.Chrome camaro RS licience plate frame 27.Camaro RS floor mats 28.Billet Aluminum Seat Lever 29.Custom 2LT emblem from EMBLEM PROS 30.CUSTOM RS side interior plates from CAMARO CHROME 31.CAMARO TRUNK MAT 32.Adaptive performance DRL harness 33.Showstopper radiator cover 34.RED LED trunk light 35.Billet Catch can 36. QUAD DIFFUSER 37.Rear foot well lighing 38.CAMARO5 sticker 39.K AND N oil filter 40. fatmat in trunk&under rear seats 41. metra kit/back up camera pioneer head unit 42.ACE steering wheel ebrake and red sunvisors 43. black rims/red outline 44.vmax ported throtle body painted red 45.T2 ports 46.color shifting 2.0 halos 47. Showstopper led customirrors 48.Vossen CV1 Rims 20in 49.Red led 4 gauge pack 50.RS headrest 51.Leather center console from lupe 52.2012 dash with HUD and suede insert 53.T2 Quad led lights 54.Acs t2 splitter 55.Acs trunk lid custom painted 56.Red calipers 57.RGB dome light 58.Carbon fiber 4 Gauge pack 59.Carbon Fiber ZL1 spoiler 60.European rear led taillights and fascia 61.Front 4 Piston Brembo Calipers powder coated Victory red. 62.BBK Long tube ceramic coated headers/high flow cats 63.Eibach Coilovers with adjustable ride height MODS I WANT TO DO Z/28 Dampers Z/28 Upper control amrs ZL1 underbelly air tray LLT Turbo some day.... |
10 Attachment(s)
and some more...............
|
O yes i forgot i have number 130 litho from Super60
|
3 Attachment(s)
HERE is my abl footwell lighting and my aac v2.o led scaner in the rear window of my car
|
Good job! Keep up the hard work and you will definitely deserve your chance to drive it (legally).
:thumbsup: |
you are 1 lucky young man.
|
thanks
|
I just got finished installing my camaro led trunk lights
Here is a lttle diy 1.Buy flexible led strips from xenith xenons for 12bucks 2. tools needed: wire cuter flatheadscrew driver eltrical tape LED strip 3.Cut the wires coming from the led strip then splice the wire 4.using a flathead screwdriver take the stock light housing out 5.peel back the eltrical tape from the stock housing then splice the wires on the stock lights 6. connect the wires to the stock one and make sure to put eltrical tape around the wires 7.peel back the 3m tape on the led strip and attach to a place under the trunk 8.Enjoy a quick and easy mod for under 15bucks |
4 Attachment(s)
here are some pics:chevy:
|
your Camaro looks great.
|
Nice job
|
My camaro had to get a new hood lock today the old one was not working also i ordered abl footwell lighting for the rear seats and one more night rider scanner for the grill area
|
Looks good man, just don't like the front grilles.
|
Quote:
|
i just wanted to thank all of the veterans THANKS
|
Sweet LT!
|
I installed a Corsa Sports Cat-Back Exhaust on my 2010 RS. still runs too quietly for m tastes unless really pushing the engine. In your opinion what can be done to improve the sound (cold air intake?). Thanks (in EXTON PA BTW)
|
Ummm??
Quote:
Did you not read? The kid is 14! He doesn't drive this Camaro yet! |
If I were you I would do a cai and maybe if you really want to you can do headers and no I do not drive but I ride in the car and do my own mods lol
|
Very nice!
Posted from my EVO 4G |
Dude really nice car! Sucks that you can't drive it yet though.
|
Quote:
|
2 Attachment(s)
Just got a red and black gm car cover for the winter here are some pics
|
Nice looking car cover but why would you use one when the car is in the garage already?
|
:chevy:
Quote:
|
I like your ideas. I wish I had one right now too. I am 14 also it be great to start modding now. How does the flow master sound. I am saving up for a flow master and aac colorshift halos as we speak and wondering if it worth it?
And have you drove it yet?? |
Dude, love what you've done to the car! But slow down and save some coin for the mods you'll want after you drive it!
Nice work. I let my 14 year old son practice the "feel" of using a clutch in my 2010 Camaro (in an open parking lot). He didn't act like it was a big deal... 2 weeks later I saw he posted on facebook how geeked he was to pratice driving "dad's new Camaro". :thumbsup: |
Very nice mods. I found in inspirational since I have a VR 2LT/RS. Great job and thanks for shareing.
|
Quote:
|
Quote:
I probably could install them, but way to scare to install them I am going to have AAC install them. And I like the Camaro RS on the dash panel I might steal that idea, and grill lighting please take pictures and video when you do that I was thinking of doing that and love to see what it looks like. and this might also look good. http://www.ridergraphix.com/2010_Cam..._Blackout.html |
Quote:
|
Quote:
|
:chevy:
Quote:
|
2SS
Quote:
|
glove and trunk led
5 Attachment(s)
not tryin to hyjack your thread only to help others with similar mods..
last 2 picts are glove box..i needed light..hahha |
Nice i like the glove box mod me and my dad were just talkin about a glovebox light do you have a DIY to this mod?
|
2 Attachment(s)
just ordered a quad tip diffuser from a member on the fourms
I got the tips today and they are 3.5 outlets its gonna look sick i will post pics when its done here are some pics of the tips |
those quad tips are gonna look BADASS!!!! or should i say badaRS....lawl
|
Quote:
|
Wow
I can't remember what I was doing at 14.... I know I wasn't modding a 30k+ beautiful red Camaro. Congrats. You got a name for her yet? |
All times are GMT -5. The time now is 05:51 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.