Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

Mr. Wyndham 08-01-2011 09:20 PM

:popcorn:

zebra 08-01-2011 10:14 PM

while he's wheel hoppin around St Augustine, i'll be praying & begging for traction in atlanta

garcmol 08-02-2011 08:42 AM

THIS is wheel hop :D


Revo1 08-02-2011 10:15 AM

http://i510.photobucket.com/albums/s...avi_image2.jpg

:D :wave:

GTAHVIT 08-02-2011 10:32 AM

:laughabove:

TAG UR IT 08-02-2011 11:24 AM

1 Attachment(s)
Chris, when you go to install your Plasma's, hard wire them in. Don't cut the wires from the plasmas to the connector. Just cut and hard wire the wires after that which make them the full time "on" DRL's. ....if that makes sense. I think I need to take pix..hold up, I think I have one.

Long story short, there's a single wire with a wire tap at each end. It's supposed to connect between either the pos or neg (can't remember) from the car to the bulb socket (where the plasma plugs in) and between the pos or neg between the car and the side marker light. They give you these two T-Taps that just go in line. Sure, might be kind of fast and easy to just tap them in there. But, many of us have had the "blinking on and off"" DRL's that have been driving us nuts.

The solution? Cut out the T-Taps. Hard wire. Let's see if I have that pix...

wow....big pic...lol

GTAHVIT 08-02-2011 11:48 AM

Cool! thanks for the tip :thumbsup:

garcmol 08-02-2011 11:51 AM

I spy a LEO notebook in that picture

GTAHVIT 08-02-2011 12:00 PM

Quote:

Originally Posted by garcmol (Post 3555872)
I spy a LEO notebook in that picture

LMFAO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

JusticePete 08-02-2011 02:29 PM

Quote:

Originally Posted by GTAHVIT (Post 3551859)
sorry... rookie mistake. zero'd out meant back to stock... :facepalm:

No I don't have the camber bolts, but they did time the bushes. at least they said they did.

Car feels balanced, not springy at all. so I'm guessing they did time them.

Get the rear negative camber reduced as far as you can with the OE adjusters. If that doesn't do it we go with Pedders Extended Range Eccentrics. BTW, reducing negative rear camber also reduces understeer. Your car will be better on the strip and in the twisties.

GTAHVIT 08-02-2011 02:33 PM

Quote:

Originally Posted by JusticePete (Post 3556709)
Get the rear negative camber reduced as far as you can with the OE adjusters. If that doesn't do it we go with Pedders Extended Range Eccentrics. BTW, reducing negative rear camber also reduces understeer. Your car will be better on the strip and in the twisties.

Cool... will do. I really need to start autocrossing this thing...

I need to think about a weekend warrior wheel tire setup on all 4 corners that I can drive to the events on...

JusticePete 08-02-2011 03:03 PM

Quote:

Originally Posted by GTAHVIT (Post 3556729)
Cool... will do. I really need to start autocrossing this thing...

I need to think about a weekend warrior wheel tire setup on all 4 corners that I can drive to the events on...

Forgeline 19x10.5s on RE11 305/30/19s. The setup is sick. It even works on Challengers -- with the right offset. These are 85% runs at best during our shakedown day at VIR.





Of course the top performing of the three (Camaro, Challenger & Mustang) is...































:chevy: :chevy: :chevy:



:chevy: :chevy: :chevy:

What we have worked out with our friends at Forgeline is more than wheel offset for clearance. We even the front and rear track for a square track and a square tire setup.

GTAHVIT 08-02-2011 03:09 PM

gah... Ok need the details on this setup...

Can I go to Forgeline and ask for the JusticePete setup???

;)

JusticePete 08-02-2011 03:24 PM

Quote:

Originally Posted by GTAHVIT (Post 3556904)
gah... Ok need the details on this setup...

Can I go to Forgeline and ask for the JusticePete setup???

;)

Almost, ask for the Pedders setup. Tell the owner Dave Schardt that Pete sent you ;)


All times are GMT -5. The time now is 02:14 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.