Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Dragstrip and Launch Techniques Discussion (https://www.camaro5.com/forums/forumdisplay.php?f=46)
-   -   10.4 137 MPH M6 hits in the Heat (https://www.camaro5.com/forums/showthread.php?t=575649)

2NASSTY 05-18-2020 11:04 PM

10.4 137 MPH M6 hits in the Heat
 
3 Attachment(s)
Car ran strong in 2000 DA with a crosswind. 2000 down to 1600 DA on last pass at TNT Bradenton. Full weight ZL1
https://m.youtube.com/watch?v=GvnXo02gIK0 10.6 137 solo pass.

https://m.youtube.com/watch?v=b60DZBddbeo 10.4 136 rear GoPro vs wheel stand Nova.

https://m.youtube.com/watch?v=wgpwhyhI7Qo 10.4 136 front GoPro.

https://www.youtube.com/watch?v=Yt91e3ZOxtg 10.4 137 vs Mustang Coupe Turbo

GODZL1A 05-19-2020 05:17 PM

Show off lol........man I haven’t ran since Cadillac attack :cry:

2NASSTY 05-19-2020 07:46 PM

Quote:

Originally Posted by GODZL1A (Post 10793483)
Show off lol........man I haven’t ran since Cadillac attack :cry:

lol. Dave, if didn't hit the track soon I was going right to jail. RONA virus Street testing was getting completely out of hand.

Can't wait to see your new suspension set-up in action. I need that soon Buddy!

Bufford 05-22-2020 08:51 PM

What all you got done to her?? Very nice mph

2NASSTY 05-23-2020 06:26 AM

Quote:

Originally Posted by Bufford (Post 10795861)
What all you got done to her?? Very nice mph

Thank you.

Here is the mod list; Factory 1.9L ported blower, factory crank, forged pistons/rods, factory ported/shaved heads, BTR 3 cam, Meth, E85, 5” intake, 102 TB, injectors, 160 stat, Monster triple, factory shifter, kooks 2”, factory exhaust. Formato Fasterproms tune.

Bufford 05-24-2020 06:18 AM

I'm hoping to get some 1/8mile passes on mine this coming or the following week. Car made 715 and 656. I feel like it will mph pretty good. It hasn't had any head work or blower porting,...it better crack 100mph or ima be pissed haha.

2NASSTY 05-25-2020 09:25 AM

Get it Man!!

stratman2SSRS 06-02-2020 08:38 AM

Put some 15" wheels on the back, and you'll get that 60ft to consistent 1,4-1.5's

IWANTA(ss) 06-03-2020 07:15 AM

Quote:

Originally Posted by 2NASSTY (Post 10792920)

Man you are launching that car butta smooth.:respekt::bow::bow::bow::respekt: What are you doing?

1fast 06-03-2020 12:15 PM

Good job

2NASSTY 06-03-2020 08:16 PM

Quote:

Originally Posted by IWANTA(ss) (Post 10803130)
Man you are launching that car butta smooth.:respekt::bow::bow::bow::respekt: What are you doing?

Quote:

Originally Posted by 1fast (Post 10803324)
Good job

Thanks Guys. Really appreciate it. On the launch I’m slipping the clutch at 5000-5500 rpm with a quick release. If the track is on point, its usually a low 1.6 high 1.5 sixty.

2NASSTY 06-04-2020 05:20 AM

Quote:

Originally Posted by stratman2SSRS (Post 10802490)
Put some 15" wheels on the back, and you'll get that 60ft to consistent 1,4-1.5's

Thanks Man. I’m sure a 15” setup will definitely help the sixty. 28” tire kills my wheel speed off the line though and trap speed in the 1/4. Im right on the edge now with traction and factory suspension on this small tire. 15” will happen if I move to 2650 Kong Blower.

No time soon though.

IWANTA(ss) 06-09-2020 02:43 AM

Quote:

Originally Posted by 2NASSTY (Post 10803667)
Thanks Guys. Really appreciate it. On the launch I’m slipping the clutch at 5000-5500 rpm with a quick release. If the track is on point, its usually a low 1.6 high 1.5 sixty.

I can’t seem to get the slipping part down I have my two step set at 4500 and with my so called slips I still blow the tires off every time

2NASSTY 06-11-2020 05:02 PM

I have no experience with a 2-step. I've heard that happens to everyone that uses one on a blower car without the right tire and suspension set-up.

I have factory suspension with solid bushings, BMR upper/lower LCAs, No electronics on launching, and barely hooking. Try launching without the 2-step and see if that helps.


All times are GMT -5. The time now is 05:44 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.