Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   msd bap (https://www.camaro5.com/forums/showthread.php?t=154725)

epstein 06-24-2011 05:04 PM

msd bap
 
Ok Im stumped. I bought a BAP from a member and installed . Went to wire it up and cut the red with white wire that goes to plug on FPCM behind passenger side 1/4 trim and vehicle wont start. Reconnect 2 wires and vehicle starts. Check GM website and look up wiring and find that pink wire and gray wire lead directly to pump. Wire it up and vehicle runs great. I have read and been told that this is INCORRECT....which I DO NOT DOUBT......So what am I doing wrong ?

Brian

forplay 06-24-2011 08:13 PM

:iono: but thats the wire I used..red/white .. msd BAP ..there were a few red wire back there..

epstein 06-24-2011 08:36 PM

Im gonna try the whipple way....... cause this way dont work ....


All times are GMT -5. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.