Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro Issues / Problems | Warranty Discussions | TSB and Recalls (https://www.camaro5.com/forums/forumdisplay.php?f=70)
-   -   noise from under center shifter? (https://www.camaro5.com/forums/showthread.php?t=30623)

francone13 07-02-2009 10:54 PM

noise from under center shifter?
 
Iv got a 2lt m6 just got back from a drive parked it in 1st like I always do nd put the hand break up then b4 I shut the car off I heard a loud thump come from under my shifter area ...I bacled out nd drove around the block nd everything seemed normal. Has this happend to ne one or does ne one knw wut this could have been?

TJ91 07-03-2009 05:37 AM

Im not to sure what that is. I also get sounds like when im rolling in first, just rolling, the minute i press the clutch down, it sounds like my gears are banging around, do you get the same thing.

francone13 07-03-2009 06:52 AM

Ya I get that seems pretty normal but wut I heard didn't sound right..hopefully its nothing

29er 07-14-2009 11:55 AM

bring it to the dealer

Krozzbow 07-20-2009 02:10 PM

I had the same noise in my 2LT/M6 and at a mileage of 150 put in, It went back to the dealership. The next mourning I received a call from them explaining that it was my neglect and the cost was at $2000.00, but they were covering the bill, “Huh?" I haven’t even drove the car no more than 3 days. Still waiting for it. Hope that for your problem is nothing major like mine.

CAMARO_MOW 07-20-2009 03:14 PM

Quote:

Originally Posted by Krozzbow (Post 701603)
The next mourning I received a call from them explaining that it was my neglect and the cost was at $2000.00, but they were covering the bill, “Huh?"

Did they say what the problem was??? :iono:

Krozzbow 07-24-2009 12:35 PM

Still getting the run-arounds from the service shop, but a staff agent got the order sheet and mentioned the following:
*Clutch plate was sticking on splines and dragging causing the clutch throw-out bearing to fail.
*warped clutch plate
*Clutch diaphram, broken finger
Order:
1- Clutch Plate
2- Clutch diaphragm
3- Clutch throw-out bearing

The other problem that i'm also facing is the time frame for the parts to be shipped to the dealership, since the car is so new.

I'll keep you updated next week.


All times are GMT -5. The time now is 07:17 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.