Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
Page 100 of 374 « First 509096979899 100 101102103104110150200 Last »
Show 40 post(s) from this thread on one page

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

PQ 01-04-2011 02:48 PM
Quote:
Originally Posted by TAG UR IT (Post 2695397)
exhaust rattle...

go to home depot talking one of the tunnel brace bolts with you and get some spacers. I put 3 spacers on each bolt (4 bolts total needing 12 spacers) and that lowered the tunnel brace low enough that I don't get that d@mn rattle anymore. Talk about a pain in the rear, man. That rattle drove me nuts. Just drop that tunnel brace and put it back in place with those spacers. It will lower it about a quarter of an inch and that's all that you need to prevent the hitting of the exhaust pipe to the tunnel brace. Cost? $2.30 (vs buying a new special tunnel brace for $100.00)....even thought that new tunnel brace looks cool as sh!t....lol
I sooooooooo need to do that. I'm just worried it may be above my skill level.

GTAHVIT 01-04-2011 02:54 PM
Quote:
Originally Posted by PQ (Post 2696075)
I sooooooooo need to do that. I'm just worried it may be above my skill level.
:bs: :laugh:

Darth_Emma 01-04-2011 02:57 PM
I can give you hand with that, PQ. I'll bring my hammer.
:P

PQ 01-04-2011 03:30 PM
Quote:
Originally Posted by Darth_Emma (Post 2696098)
I can give you hand with that, PQ. I'll bring my hammer.
:P
That would brobably work just fine. Dent the part touching the brace.

Hmmmm............

WadeWilson 01-04-2011 03:42 PM
Quote:
Originally Posted by TAG UR IT (Post 2695397)
exhaust rattle...

go to home depot talking one of the tunnel brace bolts with you and get some spacers. I put 3 spacers on each bolt (4 bolts total needing 12 spacers) and that lowered the tunnel brace low enough that I don't get that d@mn rattle anymore. Talk about a pain in the rear, man. That rattle drove me nuts. Just drop that tunnel brace and put it back in place with those spacers. It will lower it about a quarter of an inch and that's all that you need to prevent the hitting of the exhaust pipe to the tunnel brace. Cost? $2.30 (vs buying a new special tunnel brace for $100.00)....even thought that new tunnel brace looks cool as sh!t....lol
I went with a BMR tunnel brace because I thought it looked cool as sh!t. :laugh:

Da Hose 01-04-2011 03:53 PM
Quote:
Originally Posted by Shardik2SS (Post 2696239)
I went with a BMR tunnel brace because I thought it looked cool as sh!t. :laugh:
yeah, but not all of us can be cool like Nick:cool:!!!!! BIGGER HAMMER PLEASE!!!!:D

BWAHAHAHAHAHAHAHA:yikes:

PQ 01-04-2011 04:18 PM
Quote:
Originally Posted by Da Hose (Post 2696283)
yeah, but not all of us can be cool like Nick:cool:!!!!! BIGGER HAMMER PLEASE!!!!:D

BWAHAHAHAHAHAHAHA:yikes:
I'm gonna get a titanium tunnel brace. Then I'll be twice as cool.

speedster 01-04-2011 04:41 PM
Quote:
Originally Posted by GTAHVIT (Post 2693818)
Finally swapped out the mufflers...

the 2.5" are on there now... Much louder than the 3" chambered I had on there...

A LOT louder. Sounds Nasty. but I'm thinking it may be too loud.

Now, I've got an exhaust rattle I need to chase down...

But it was fun.. :D

the kiddos came out to give me a hand.
That is cool. Look whose hands were the dirtiest. Now we know who REALLY did the muffler swap. Just 'cause she fits under the car better than you doesn't mean she had to do it all herself...:)

Also, he was eyeballing that exhaust more than Dad. How LOUD is it? :D

Darth_Emma 01-04-2011 04:46 PM
I think the titanium tunnel brace is worth at least another 10 rwhp.

WadeWilson 01-04-2011 04:49 PM
Quote:
Originally Posted by Da Hose (Post 2696283)
yeah, but not all of us can be cool like Nick:cool:!!!!! BIGGER HAMMER PLEASE!!!!:D

BWAHAHAHAHAHAHAHA:yikes:
:laugh:

Quote:
Originally Posted by PQ (Post 2696370)
I'm gonna get a titanium tunnel brace. Then I'll be twice as cool.
:mad0260: :laugh:

zebra 01-04-2011 06:43 PM
i just helped my friend swap in an off-road mid pipe on his RX8 today & i got dirtier than him!
car sounds better, though & smells rich!!

TAG UR IT 01-05-2011 12:13 AM
Quote:
Originally Posted by PQ (Post 2696075)
I sooooooooo need to do that. I'm just worried it may be above my skill level.
:laugh:
Quote:
Originally Posted by Shardik2SS (Post 2696239)
I went with a BMR tunnel brace because I thought it looked cool as sh!t. :laugh:
Agreed. I saw two of them for sale. but, I thought only one of them actually sat lower giving a larger space to prevent the hanging exhaust from touching the brace.
Quote:
Originally Posted by Darth_Emma (Post 2696437)
I think the titanium tunnel brace is worth at least another 10 rwhp.
I was told 12, but you might be right. I think they were exaggerating a wee bit.:D

Da Hose 01-05-2011 10:21 AM
Quote:
Originally Posted by PQ (Post 2696370)
I'm gonna get a titanium tunnel brace. Then I'll be twice as cool.
U mean like this guy?

GTAHVIT 01-05-2011 10:24 AM
:confused0068:

if you had ever seen any old pics of Randy... you'd be shocked.....


:laugh:


All times are GMT -5. The time now is 02:42 AM.
Page 100 of 374 « First 509096979899 100 101102103104110150200 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.