Overkill Supercharger kit, which cams
 

Whats the best cam combo for a supercharged 3.6 At? That will mainly be street driven.

I believe MagnumForce has Mace cams and Overkill stage 3. Messaging him may get you some help. His build thread is one of the best on here. Though his is an LLT and yours is an LFX if that matters...

Only cam option is mace profile.. contact will from overkill he has them with the modded fuel lobe for forced induction

Thank you.

From the sidelines, thanks for this post. I had no idea this was a thing. Information by word of mouth can be tricky and I've been wondering how to get the "Overkill fuel lobe" cams since I've only seen one poster with them, figured it was a one-off.

There haven't been any successful Mace Cam Fuel Lobe Mods Added to the Supercharger Stage 1 or 2 Yet...

With this being the case are people running superchargers running stock cams?

Overkill Supercharger Kit
 

I have had the fuel lobe cam from Overkill for about 6 months...522RWHP( for now)

The cam and what other mods to get 522 RWHP?

119# injectors, Novi 2200 S/C,direct methanol injection (100%),E-85/93 Octane (50/50),lots and lots of tuning by Will at Overkill

That’s impressive. What do you use it for? Driver only or ? Anything done to the transmission or drivetrain? Any exhaust work? I know I’ve got 20 questions. I just like to hear what these little workhorse engines can do.

Eaton Tru Trac , 3.91 gears, 1 Piece CF Drive Shaft, MBRP Catback exhaust

522 RWHP is way to much for stock , What have you done to the Eng internals?? I'm at 400 RWHP, maybe a little more with my new WasteGate. I wont go any higher with a Stock Eng.

I asked will directly is there any successful Mace Cam + Fuel Lobe + Stage 2 Overkill Supercharged LLTs and there wasn't. Are you LFX?