Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro 1LE Forum (https://www.camaro5.com/forums/forumdisplay.php?f=149)
-   -   1LE Differential and Half Shafts/Axles Part Numbers (https://www.camaro5.com/forums/showthread.php?t=237956)

Higgs Boson 07-17-2012 03:23 PM

1LE/ZL1 Part Numbers
 
1LE Diff (3.91) - 22806794
1LE 3.91 Gears only - 22813040 (fits SS and V6 manual)
1LE LH Axle - 22806795
1LE RH Axle - 22806796
1LE Front Sway Bar - 22812946
1LE Front Sway End Link (passenger side) - 22842515
1LE Front Sway End Link (drivers side) - 22842516
1LE Rear Sway Bar - 22786260 (same as ZL1, comes with brackets and bushings)
1LE Rear Sway Bar Endlink (2) - 22761221
1LE Rear Sway Bar Bracket Bolt (4) - 11518623

1LE/ZL1 Wheels 20x10 Black - 22798741
1LE/ZL1 Wheels 20x11 Black - 22798743
1LE/ZL1 Hubs - 22924741 (x2)

ZL1 Toe Rods/Links - 22845487
ZL1 Front Sway - 22842517 (comes with brackets and bushings)
ZL1 Rear Sway - 22786260 (comes with brackets and bushings)

pouncer72 07-19-2012 06:46 PM

Diff (complete)
Gears

Mr_Draco 07-19-2012 08:20 PM

Quote:

Originally Posted by Higgs Boson (Post 5315444)
I called the GSM at my friendly Chevy dealer for a VIN so I can get PNs....He doesn't have one yet and a locate within 500 miles came up blank. We will try again each week until we get a VIN and some part numbers. :-)

What PNs do we want?

Diff -
Half Shafts -
Wheels (guess I could get that from ZL1) -
Hubs -

No need to check for vins for awhile. The 1LE doesn't go into production till end of Aug and won't hit dealers till Oct at the earliest.

As for parts, the only parts I've seen any interest in is;
- complete diff
- just the gears

monstertodd 07-19-2012 11:47 PM

Quote:

Originally Posted by Higgs Boson (Post 5316637)
don't need it to hit a dealer, just for a vin to get stamped.... :-)

guess I'll let the thread die for a month before I resurrect!

Don't worry I'll help you keep it at the top because I'm looking for these parts too!

I just hope they'll fit 2010s.

Avalnch 07-22-2012 12:04 PM

Another 1LE thread to subscribe to.

Cpanthers85 07-23-2012 02:10 PM

:popcorn:

I'm just curious if those Axles will slide right in and are going to be less expensive than the 1000hp aftermarket ones.

SUBD!

monstertodd 07-23-2012 02:17 PM

Quote:

Originally Posted by Cpanthers85 (Post 5331936)
:popcorn:

I'm just curious if those Axles will slide right in and are going to be less expensive than the 1000hp aftermarket ones.

SUBD!

I imagine they'll be cheaper. I don't see why they wouldn't slide right in. As far as I know, the driveline is very similar between the 2010's and 2013's. It's the suspension that is different.

monstertodd 07-29-2012 01:10 PM

Any new news on this?

BUMBLE-B-TUNA 07-29-2012 09:04 PM

Subscribed

Mr_Draco 07-30-2012 04:43 PM

Quote:

Originally Posted by monstertodd (Post 5362388)
Any new news on this?

I had to get my car inspected a couple days ago and the dealer said these parts aren't in the system yet.

monstertodd 07-30-2012 05:38 PM

Quote:

Originally Posted by Mr_Draco (Post 5368065)
I had to get my car inspected a couple days ago and the dealer said these parts aren't in the system yet.

Thanks for checking on that.

Driveshaftshop 07-30-2012 06:22 PM

i was told the axles are the same but have a larger outer CV, so the hubs would have to changed out also.

HaubSS 07-30-2012 07:47 PM

I am not sure, but I was under the impression that the Differential is the same, the only difference is the ring and pinion. However the axles are different/upgraded but I don't know if this will be a direct bolt-in or require a hub change as mentioned above.

Badger 07-31-2012 07:45 AM

:iono:How can the ring and pinion be different if the Differential is the same??...do you mean the gear ratio is different?? 3.91?


All times are GMT -5. The time now is 06:52 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.