Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (https://www.camaro5.com/forums/forumdisplay.php?f=76)

- - New clutch install help (https://www.camaro5.com/forums/showthread.php?t=529061)

abshire1006

05-16-2018 11:22 AM

New clutch install help

I just installed a act clutch in my car, now that everything is done and car is on the ground when I let my foot off the clutch it starts to move the won’t engage all the way, like my slave cylinder isn’t disengageing all the way. I bleed the clutch multipule times, the measurements all seamed to be correct. Is there something I might want to try?

MA2010SS

05-17-2018 05:45 AM

Sounds like the fingers on the PP are not releasing the clutch, did you change out the flywheel also? How does the pedal feel?

frankwjr

05-17-2018 08:57 AM

personally I want to see dueling monster clutches(lulz - chk ur sig OP!)....I do also have a serious recommendation...call ACT.

peace.

abshire1006

05-20-2018 01:56 PM

Quote:

Originally Posted by MA2010SS (Post 10187950)

Sounds like the fingers on the PP are not releasing the clutch, did you change out the flywheel also? How does the pedal feel?

Yes I did put a new flywheel in the car when I changed the clutch.

WHAMMO

05-20-2018 09:51 PM

What was the recommended gap?

All times are GMT -5. The time now is 03:48 AM.