Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   Lysholm Twin Screw w/ Dyno (https://www.camaro5.com/forums/showthread.php?t=151522)

Mike@RMCR 06-07-2011 10:53 AM

Lysholm Twin Screw w/ Dyno
 
We actually finished this car right before the Camaro 5 Fest.

2010 Camaro SS LS3

Lysholm 2.3L Twin Screw 6.5lbs of boost
ARH 1 7/8 Headers short system with factory hook ups
MSD BAP
Custom ECM Tune

This was our first install of this kit. The kit installed very easy and the fit and finish is what we come to love from Vortech/ Lysholm Air Power Group.

Since we finished this in such short time for the show I did not get a chance to raise the boost to a higher level. All in all we are very pleased with the HP made and would recommend this kit to anyone looking for a great positive displacement supercharger kit.

We are getting ready to do a cam change and up the boost so I will keep you all posted on our gains.

Here are some pics and the before and after on the dyno. This was with only 6.5 lbs of boost.

http://www.camaro5.com/forums/pictur...ictureid=54436

http://www.camaro5.com/forums/pictur...ictureid=54437

http://www.camaro5.com/forums/pictur...ictureid=54438


Here is the link to the video on our photobucket.

http://s777.photobucket.com/albums/y...t=FILE0138.mp4

Inferno LSX 06-07-2011 11:02 AM

Nice! I remember seeing that car at C5F2. That blower was my second choice. I love the way it looks on top of the motors. The brackets and pulleys are very nice looking.

Caliman93230 06-12-2011 06:27 AM

I'm curious to see what it will do @ 9-10 lbs boost

halo8hkk 06-12-2011 02:49 PM

Gratz!

2010 SSRS 06-12-2011 02:54 PM

Quote:

Originally Posted by Caliman93230 (Post 3329666)
I'm curious to see what it will do @ 9-10 lbs boost

+1

Mike@RMCR 06-13-2011 09:42 AM

Should have #'s by the end of the week. I just got the car back for the cam install and pulley change. Will keep everyone posted.

VRCamaroSS 06-13-2011 06:55 PM

I am guessing since it's got headers that the whine is not as loud as other videos.

RAYSRT8 06-13-2011 06:59 PM

Can the bottom end handle the additonal boost without being forged? I was under the impression that going to a smaller pulley to increase the boost would cause premature damage to the pistions and/or rods.

Mike@RMCR 06-13-2011 10:24 PM

Quote:

Originally Posted by RAYSRT8 (Post 3335257)
Can the bottom end handle the additonal boost without being forged? I was under the impression that going to a smaller pulley to increase the boost would cause premature damage to the pistions and/or rods.

Haven't seen any issue's when running 8 to 9.5lb of boost.

orange-prince 06-14-2011 01:38 PM

can you shot me a pm of the price ?

Mike@RMCR 06-14-2011 07:25 PM

Quote:

Originally Posted by orange-prince (Post 3338231)
can you shot me a pm of the price ?

PM Sent.

Mike@RMCR 06-23-2011 04:51 PM

So here is the new graph with our camshaft kit and changing the SC pulley out.

We picked up over 91HP and 100ft lbs to the tires. Fuel pressure was holding steady and we made these runs with the car nice and hot and with only 18 degrees timing.

Here is the graph.

http://www.camaro5.com/forums/pictur...ictureid=55750

halo8hkk 06-23-2011 04:57 PM

Nice

shevyman 06-23-2011 05:01 PM

that is nice. i am loving those numbers. to bad my wallet is crying or i would try to get some cams and do that to mine


All times are GMT -5. The time now is 02:58 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.