Motor Mounts? To Upgrade Or Not?
I will be pulling my stock LS3 for forging in the following weeks and considering replacing my stock motor mounts with one of the three following options.
- Stock SS Motor mounts - Stock ZL1 Motor mount - BMR motor mounts Would like to hear what everyone is using as well as your thoughts on the matter. |
I'm about to pull my SS mounts in favor of a set ZL1 mounts stiffer then SS without the NVH of a solid mount.
|
Quote:
ZL1 PN - 20952437 |
Motor Mounts? To Upgrade Or Not?
I have BMR poly engine mounts. Have had them on for a while now. I wish I would have gotten the solid mount inserts instead of the poly. I can always upgrade the inserts in the future though.
|
Quote:
|
ZL1/Z28 mounts on mine...
-Don |
Quote:
|
Quote:
|
Yes, the ZL1 - Z/28 mounts were designed for track use (and the heavier supercharger in the case of the ZL1). The supercharger + lid weight 80 lbs more (vs the LS3 intake).
No noise/vibration added and zero issues - and I do track with those... -Don |
Quote:
|
Quote:
Yeah a little more vibration at idle. If you go with solid ones I’m sure that would increase the vibration noise |
Quote:
-Don |
Quote:
|
20952437
For a 2013 ZL1 or 2014 Z/28 Same part number Special order — sometimes dealer can get it in a couple of days... ~$90 each (left/right are the same #) https://www.rockauto.com/en/parts/ac...tor+mount,5552 Rock auto lists them @ $101.. 2 year warranty too! -Don |
All times are GMT -5. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.