yeah it wasn't bad...waiting till the end of the year where the DA regularly hits -1000! my slip is the attached image.

Nice 60" Steve, come end of October/early november or after christmas when the track re-opens that things gonna really fly. I forsee you climbing this list a few spots ;)

yeah i cant wait for the cold air!!!

ALEX YOU JOINED!!!!!!! that's awesome!!!

12.86 @ 109 tonight,

91 gas
stock tires
muffler delete

http://i649.photobucket.com/albums/u...y/1286slip.jpg

:word::drinking::thumbsup:

12.316 @ 113.45
 

Pulley is slipping, only got 6 psi.


Density Altitude: 1545 feet
Relative Density: 95.56 %


http://www.badasscamaro.net/images/12_3_track.jpg

bone stock run
 

Tires used on the pass: stock
Performance Mods (if any): none
Category submitted for: stock
60'.............2.0209
330'...........5.6641
660'...........8.6619
660’ mph...82.26
1000'..........11.1570
1320'..........13.30
1320’ mph…106.12
Name of the track: dragway 42
Date of pass:10/04/09
Weather conditions: overcast DA about 990

Update:
only change is the cam
11.37@121.55 N/A
Time slip is in never ever land but here's the vid

http://www.youtube.com/watch?v=tPH_vWePCNk

i dont have a way to upload my slip, but it was nothing spectacular, i ran a 13.42 with my A6 fully stock camaro at 103.96 mph

Speed Inc SHOP CAR
 

11.00@126.7

1.55 60ft

best 60ft was a 1.53

The last pass of the day I tried to leave harder and spun to a 1.64 60ft, went 100.4 to the 1/8 and ran 11.01@125.99. This would have been our 10sec slip. There is always next time.

TVS2300 @ 10psi ( 100 octane for these results )
SuperMaxx LT's w/ cats and stock mid pipe
SLP LM II
RotoFab CAI ( using Magnuson Tube )
Eibach lowering springs
18" C6 Replica wheels with M&H 345/35/18 Drag Radials
stock clutch, driveshaft and axle shafts

NO WEIGHT REDUCTIONS
4050 race weight
DA +705 according to DragTimes.com

http://i120.photobucket.com/albums/o...shopcar016.jpg

Sooo close!

Did you mean 345/35R18's
and what width rim is that?

you are correct..sorry

I can not confirm 9.5 or 10" wheel.