OE Quiet Endlinks with Spherical Function
 

Spherical endlinks have been a staple on race cars for years. Spherical endlinks are not perfect. They are either noisy when you bolt them on or will become noisy after you use them. The range of motion can also cause issues with your setup.

Pedders new endlinks use a unique process. Unlike a traditional cast ball and stud, Pedders endlink ball joint starts life as a ball bearing. The stud is friction welded to the ball bearing. There are NO bolts. The housing is a precision casting with an extreme high temperature epoxy coating for a virtually perfect fit.

For OE, Xa coilovers and brand-x coilovers order CAMENDLINKKIT1

For Supercar coilovers order Camaro Endlink Kit Supercar

http://forums.peddersusa.com/imageho...0e31f5d90d.jpg

http://forums.peddersusa.com/imageho...0b061c873c.jpg

Camaro Rear

http://forums.peddersusa.com/imageho...0bf7537e7b.jpg

The function is far better than thje lame picture I have on my laptop. There are better pictures available in out catalog, but I'll get a better one up when I am back in the office.

This just in from PRI

http://sphotos-b.xx.fbcdn.net/hphoto...39892877_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...31308330_o.jpg

GM and Pedders? No, Pedders does not make the GM Race Endlink. Pedders and GM do use the same ball joints. Two Great Great Companies Thinking the Same Way.

http://forums.peddersusa.com/imageho...46904a7a54.jpg

Those front endlink rods do not look any beefier than stock or is it just a bad pic?

Really bad picture. I am away from the office at West Coast Customs. When I get back in the office I'll post up more detailed pictures.

Will these work with Pfadt sway bars?

Yes sir.

Installed the Pedders bars and these end links last weekend, huge improvement, and they are quiet as advertised. I did have issues with the lack of instructions included with the parts, and the incomplete ones on Pedder's website... One example is these end links don't require drilling the existing mounting holes on the car as described in the online instructions, didn't discover that until after drilling. :facepalm: Good product though. :)

i've added these new parts to our site,

will replacing this part quiet some of the odd noises that our Camaro makes? :iono:. I'm newbie with cars..just wanted to know what this does.

it's a replacement link that will be stronger than the stock links area, but typically not going to something that you replace to make the car quieter if it's still stock suspension wise.
The available aftermarket parts have been known to make noise, this hasn't been the case with the Pedders links, these are just as quiet as stock, but are much stronger.

Give me a call at the warehouse (830.522.4757) and we'll arrange getting you new ball ends with larger studs.

Regards,
Dan

Dan's the man...





that can arrange for your larger studs, lol

I would love to say yes and tell you to buy Pedders endlinks, but the answer is no. Your OE endlinks should be just as quiet as Pedders high efficiency endlinks. If they are not, they are covered under warranty.

Upgrading to Pedders high efficiency endlinks:

for stronger more durable ball joints.
to improves sway bar function.
for corner weighting adjustable length endlinks are essential.
are an excellent replacement for anyone tired of the noise from spherical endlinks.

Overall the Camaro is an exceptionally quiet car. Tell us about your noises.

Dan is the man!!! That's really awesome, thank you, great service!!!

Better Pictures Part #1

http://forums.peddersusa.com/imageho...0b061c873c.jpg