:)

I would be interested if you still have kits available

Yes, i do let me know.

Thanks for your quick response today. Pleasure doing business with you!!! Thanks Darth Emma for pointing me in the right direction.

Thank you.

I am buying soon but would like to know this first please.

which camera did you use?

PM sent,

I'm interested in the kit, please put me down for one. Can you please elaborate a little more on the two different types of cameras? Do the cameras come painted?

Cameras here are the two cameras.

1: this is the cheaper of the two, It is made in china and is cut down to the new size.
http://www.camaro5.com/forums/attach...1&d=1301159550

info.

Image sensor: 1/3" colour CMOS

TV system: PAL/NTSC

Effective pixels: 628 x 582

Sensing area: 5.78 x 4.19mm

Sync system: internal

Resolution: 420 TV lines

Minimum illumination: O.5 Lux/F1.2 (0 Lux with IR)

S/N ratio: more than 48dB

Electronic shutter: 1/50 - 1/10,000 seconds

Video output: RCA connector, 1.0vp-p, 75Ω

Current consumption: <=250mA

Power supply: DC 12V

Dimensions: 58 x 25 x 30mm

Weight: 70g




Second camera:

Its OEM here is how it comes thanks STINGS http://www.camaro5.com/forums/pictur...ictureid=48223

Info on the camera.

1/4″ Panasonic CCD Color Camera

5 Lux For Illumination & Sharper Image

Color Image w/Automatic White Balance

Electronic Auto Iris

150 Degree Horizontal and 100 degree Vertical Lens with Excellent Depth of Field

Waterproof Case w/Anti-fog Lens

I will go with the second camera.

Walt B.

Am I right in assuming that you'd pretty much have to cut a box out of your bumper to use the second one, as opposed to drilling 1-5 holes (depending on whether you use 3M tape, instead) for the second?

Is there a difference in viewing angle or anything important like that between the two? Do they both display the guide lines?

Yes you will have to cut a box out of the bumper, there close on viewing angle 170 for the first one and 150 for the second one.

I guess I don't understand how the second one is better?

Doesn't the first one have a larger CMOS a lower lux which makes it more sensitive to low light situations? Also has a RCA connector/smaller for an easier installation?

The second one comes with the water tight connectors on the out side, so you have them at the pint of the camera and then it comes with a grommet to go in to the trunk and a second water tight connectors as apposed to a RCA jack.

Ah, I see...would it be possible to send the aftermarket one with my kit? Thanks!