Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro ZL1 Forum - ZL1 Specific Topics (https://www.camaro5.com/forums/forumdisplay.php?f=85)
-   -   ADM or Lingenfelter or Hennessey or.... (https://www.camaro5.com/forums/showthread.php?t=375106)

ADM PERFORMANCE 08-30-2014 12:39 PM

Quote:

Originally Posted by mylftft (Post 7922004)
:wave:I hear the expansion of ADM into California is happening very soon!

What he said !

ADM PERFORMANCE 08-30-2014 12:41 PM

2 Attachment(s)
Quote:

Originally Posted by AcesFull (Post 7921987)
I have my 2013 zl1 with Andy at ADM right now doing the 750 package. After reading about his work and then visiting with him on the phone and in person, I have no doubt I made the right decision on a performance shop. Andy is a class act with a great reputation. I would not hesitate on recommending him to anyone.

Here is aces full under the knife

ADM PERFORMANCE 08-30-2014 12:43 PM

1 Attachment(s)
Quote:

Originally Posted by ADM PERFORMANCE (Post 7922119)
Here is aces full under the knife

Nice way to start off

SIC13ZL1 08-30-2014 01:39 PM

Quote:

Originally Posted by mylftft (Post 7922004)
:wave:I hear the expansion of ADM into California is happening very soon!


I hope so, I would love to get some work done by ADM.

2ss-booya 08-30-2014 02:05 PM

Quote:

Originally Posted by SIC13ZL1 (Post 7922199)
I hope so, I would love to get some work done by ADM.

Just drive there...thats what I did lol.

Gizmo 08-30-2014 03:04 PM

I'm interested in getting a package and price put together from ADM as well. Currently, I've got a Rotofab and VMax ported TB on my car. It runs good but I'm always looking to maximize what I have without tearing into the engine. There's too much left on the table.

What mods would I be looking at to get the best performance without doing heads or cam? I'm thinking along the lines of pulley(s) and tunes and any other obvious supporting mods I would need. Are headers worth the money? I don't want something obnoxious so I would want to run cats... I've heard that can cause problems down the road when you're dealing with boost. I can only get 91 octane so I'm not looking for a record breaker... just something to really wake the car up.

TX/ZL1 08-30-2014 03:25 PM

Quote:

Originally Posted by ADM PERFORMANCE (Post 7922119)
Here is aces full under the knife

This is like getting a glimpse into the future. I spoke with Andy earlier today and he's going to do the 750 upgrade on my '14 RRM. I just ordered the exact same engine cover and strut from River City Custom in San Antonio. Love the way it looks on yours!
Making arrangements to get the car to Dallas and can't wait to get this party started!
I also have to say that, like everybody else on this thread, I think Andy is great to work with. I'm not nearly as knowledgable as many of you on this blog. Andy took a lot of time with me today. He didn't talk over me, and he didn't talk down to me......He just talked to me. As a result, my trust and confidence level is through the roof.

ADM PERFORMANCE 08-31-2014 07:24 AM

Your goals
 
Quote:

Originally Posted by Gizmo (Post 7922321)
I'm interested in getting a package and price put together from ADM as well. Currently, I've got a Rotofab and VMax ported TB on my car. It runs good but I'm always looking to maximize what I have without tearing into the engine, especially on something with a supercharger. There's too much left on the table.

What mods would I be looking at to get the best performance without doing heads or cam? I'm thinking along the lines of pulley(s) and tunes and any other obvious supporting mods I would need. Are headers worth the money? I don't want something obnoxious so I would want to run cats... I know that can cause problems down the road with the supercharger. I can only get 91 octane so I'm not looking for a record breaker... just something to really wake the car up.

Give me a call on Tuesday and I can line you up with a great package for what your goals are.

Thanks
Andy
214-228-8782

LuckyZL-1 08-31-2014 06:45 PM

Quote:

Originally Posted by 2ss-booya (Post 7922227)
Just drive there...thats what I did lol.

+1 I drove it there and he gave me a ride to airport then a few days later he picked me up at airport and I drove that beast home!

Ledbetterjw 08-31-2014 07:14 PM

Quote:

Originally Posted by AcesFull (Post 7921987)
I have my 2013 zl1 with Andy at ADM right now doing the 750 package. After reading about his work and then visiting with him on the phone and in person, I have no doubt I made the right decision on a performance shop. Andy is a class act with a great reputation. I would not hesitate on recommending him to anyone.

I live right down the street from you in Bastrop.... Is yours the red or black one Ive seen around town? Id like to check it out after your upgrades. Trying to decide which route to go with mine.

Kevlar382 09-01-2014 03:17 PM

Lingenfelter

TX/ZL1 09-03-2014 11:17 PM

the flatbed just left with my car, taking it to Andy at ADM for a 750 mod. I am really pumped to have the guys at ADM build me a great car.

AcesFull 09-04-2014 09:37 AM

I'm flying up tomorrow morning to pick mine up from ADM..... Working with Andy and ADM has been an great experience. I've never felt so comfortable leaving my car anywhere as I did leaving it with Andy. It's great to see someone enjoy what he does and take so much pride in his work. Looking forward to the drive home.

TX/ZL1 09-04-2014 09:53 AM

Quote:

Originally Posted by rforbes (Post 7931581)
I have a preorder car that I received in Aug 2009. I am fortunate to live about 2 miles away from ADM and took the car to them immediately to do some initial upgrades done. I have gone from a simple tune and cold air box installed to an LS3 Conversion with a TVS2300 installed to now a 417 install with ZL1 rear end and nitrous kit installed. The car runs like a scalded cat (1.45 60 / 10.42 1/4 mile) and have never had any negative issues with the work they have done. His work is top notch and his pricing is reasonable. What else could you ask for? yes, he gets busy at times and can be hard to get in but it is definitely worth the wait. As long as my many years of continued patronage is reciprocated I will continue to use them and it would definitely be worthwhile for anyone outside of town to make the trip to receive the same top quality builds that they are known for.

I couldn't agree more...love the pic of you lighting it up!


All times are GMT -5. The time now is 12:05 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.